Second-order wave maker theory using force-feedback control. Part I: A new theory for regular wave generation

Abstract Second-order wave maker theory has long been established; the most extensive and detailed approach given by Schaffer [1996. Second-order wave maker theory for irregular waves. Ocean Engineering 23, 47–88]. However, all existing theories assume the wave paddle is driven by a position-feedback motion controller. Early research in the wave power field led to the design of a force-controlled absorbing wave machine [Salter, S., 1982. Absorbing wave-makers and wide tanks. In: Directional Wave Spectra Applications, pp. 185–200]. In addition to operating as an excellent absorber, this machine seemed to introduce very little spurious harmonic content when driven with a first-order command signal. The present paper provides a mathematical model for the operation of wave makers using force-feedback control and seeks to explain this apparent advantage. The model is developed to second-order so that a command signal compensating for the remaining spurious wave is also provided. Due to the complexity of the problem, the model has been limited to flap-type wave machines and the generation of regular waves. A variety of numerical tests in force-control mode have been conducted, indicating that the spurious wave content is greatly reduced when compared to the position-control mode. A separate experimental study validating the theory is presented in a part II paper by the same authors.

[1]  Stig E. Sand,et al.  CORRECT REPRODUCTION OF GROUP-INDUCED LONG WAVES , 1980 .

[2]  T. Havelock,et al.  LIX.Forced surface-waves on water , 1929 .

[3]  Dale B. Cherchas,et al.  Closed-loop discrete-time control of a hinged wavemaker , 1988, Autom..

[4]  Shigeru Naito.  Wave Generation And Absorption In Wave Basins: Theory And Application , 2006 .

[5]  M. McCormick,et al.  Wave Energy Conversion in Restricted Waters by a Heaving Cylinder/Linear--lnductance System , 1981 .

[6]  Robert T. Guza,et al.  Paddle Generated Waves in Laboratory Channels , 1980 .

[7]  Haiwen Zhang,et al.  A deterministic combination of numerical and physical models for coastal waves , 2006 .

[8]  P. Leeuwen,et al.  A new method for the generation of second-order random waves , 1991 .

[9]  Alain H. Clément,et al.  Self adaptive control of a piston wave-absorber , 1998 .

[10]  Robert T. Hudspeth,et al.  Complete Second-Order Solution for Water Waves Generated in Wave Flumes , 1993 .

[11]  Chris Swan,et al.  On the accurate and efficient calibration of a 3D wave basin , 2008 .

[12]  Stephen H. Salter.  Absorbing wave-makers and wide tanks , 2018, Physical Modelling in Coastal Engineering.

[13]  M. H. Zaman,et al.  Second Order Wave Generation Technique in the Laboratory , 2007 .

[14]  Brian Randell,et al.  Performance predictions for extended paged memories , 2004, Acta Informatica.

[15]  Stig E. Sand,et al.  Influence of wave board type on bounded long waves , 1985 .

[16]  Michael E. McCormick,et al.  Analysis of Optimal Ocean Wave Energy Conversion , 1983 .

[17]  Hemming A. Schäffer,et al.  SECOND-ORDER WAVEMAKER THEORY FOR IRREGULAR WAVES , 1996 .

[18]  Hemming A. Schäffer,et al.  Review of Multidirectional Active Wave Absorption Methods , 2000 .

[19]  J. Falnes.  Radiation impedance matrix and optimum power absorption for interacting oscillators in surface waves , 1980 .

[20]  Stig E. Sand.  Long Wave Problems in Laboratory Models , 1982 .

[21]  Jerome H. Milgram,et al.  Active water-wave absorbers , 1970, Journal of Fluid Mechanics.

[22]  Johannes Falnes,et al.  Optimum Control of Oscillation of Wave-Energy Converters , 2002 .

[23]  Robert G. Dean,et al.  Water wave mechanics for engineers and scientists , 1983 .

[24]  J. Falnes.  Ocean Waves and Oscillating Systems , 2002 .