Development and Implementation of a New Adaptive Intelligent Speed Controller for IPMSM Drive

In controlling nonlinear, time varying and ill defined systems artificial intelligent controllers have been proved to be superior in design and performance when compared to the conventional controllers. This paper presents a novel adaptive-network-based fuzzy inference system (ANFIS) for speed control of interior permanent magnet synchronous motor (IPMSM) drive. By utilizing a learning technique, the proposed ANFIS can construct an input-output mapping based on both human knowledge (in the form of fuzzy if-then rules) and stipulated input-output data pairs. The back-propagation technique is used for online tuning of ANFIS parameters in order to optimize the performance of the proposed drive. The proposed control technique also provides flux control to control the motor over a wide speed range. The complete drive has been successfully implemented in real-time using digital signal processor board DS1104. The performance of the proposed ANFIS based IPMSM drive is investigated both in simulation and experiment at different operating conditions.

[1]  M. Trlep,et al.  Evaluation of saturation and cross-magnetization effects in interior permanent magnet synchronous motor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[2]  Ching-Tsai Pan,et al.  A linear maximum torque per ampere control for IPMSM drives considering magnetic saturation , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[3]  J. M. Monfared,et al.  A Genetic Based Fuzzy Logic Controller for IPMSM Drive Over Wide Speed Range , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[4]  M. Sanada,et al.  Influence of Rotor Configuration on Sensorless Control for Permanent-Magnet Synchronous Motors , 2008, IEEE Transactions on Industry Applications.

[5]  J. Milimonfared,et al.  A genetic based fuzzy logic controller for direct torque controlled IPMSM drives over wide speed range , 2008, 2008 10th IEEE International Workshop on Advanced Motion Control.

[6]  M. V. Aware,et al.  Application of adaptive neuro-fuzzy controller (ANFIS) for voltage source inverter fed induction motor drive , 2000, Proceedings IPEMC 2000. Third International Power Electronics and Motion Control Conference (IEEE Cat. No.00EX435).

[7]  Marco Tursini,et al.  Real-time gain tuning of PI controllers for high-performance PMSM drives , 2002 .

[8]  P. Pillay,et al.  Control characteristics and speed controller design for a high performance permanent magnet synchronous motor drive , 1987, IEEE Power Electronics Specialists Conference.

[9]  D.M. Vilathgamuwa,et al.  A new artificial neural network controller for an interior permanent magnet motor drive , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[10]  D. M. Vilathgamuwa,et al.  Implementation of an artificial-neural-network-based real-time adaptive controller for an interior permanent-magnet motor drive , 2003 .

[11]  T. S. Radwan,et al.  Performance of Interior Permanent Magnet Motor Drive over Wide Speed Range , 2002, IEEE Power Engineering Review.

[12]  C. S. George Lee,et al.  Neural fuzzy systems: a neuro-fuzzy synergism to intelligent systems , 1996 .

[13]  Ahmed Rubaai,et al.  Development and implementation of an adaptive fuzzy-neural-network controller for brushless drives , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[14]  M. Azizur Rahman,et al.  Analysis of brushless permanent magnet synchronous motors , 1996, IEEE Trans. Ind. Electron..

[15]  B. Achiriloaie,et al.  VI REFERENCES , 1961 .

[16]  M. Chiaberge,et al.  An integrated hybrid approach to the design of high-performance intelligent controllers , 1995, Proceedings IEEE Conference on Industrial Automation and Control Emerging Technology Applications.

[17]  S. F. Siraj,et al.  A neural-fuzzy logic approach for modeling and control of nonlinear systems , 2002, Proceedings of the IEEE Internatinal Symposium on Intelligent Control.

[18]  M.F. Rahman,et al.  A novel direct torque control for interior permanent magnet synchronous machine drive system with low ripple in torque and flux-a speed sensorless approach , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[19]  T. Murata,et al.  Maximum torque/minimum flux control of Interior Permanent Magnet Synchronous Motor based on magnetic energy model , 2007, 2007 European Conference on Power Electronics and Applications.

[20]  Yiguang Chen,et al.  Novel Fuzzy Control Strategy of IPMSM Drive System with Voltage Booster , 2006, 2006 6th World Congress on Intelligent Control and Automation.

[21]  Gordon R. Slemon.  Electric Machines And Drives , 1992 .

[22]  Seung-Ki Sul,et al.  Speed control of interior permanent magnet synchronous motor drive for the flux weakening operation , 1997 .

[23]  Rong-Jong Wai,et al.  Robust recurrent fuzzy neural network control for linear synchronous motor drive , 2003, Neurocomputing.

[24]  Thomas M. Jahns,et al.  Interior Permanent-Magnet Synchronous Motors for Adjustable-Speed Drives , 1986, IEEE Transactions on Industry Applications.

[25]  E. Levi,et al.  A comparative analysis of fuzzy logic and PI speed control in high performance AC drives using experimental approach , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[26]  Lixin Tang,et al.  A novel direct torque control for interior permanent magnet synchronous machine drive system with low ripple in torque and flux-a speed sensorless approach , 2002 .

[27]  Seung-Ki Sul,et al.  Improved dynamic performance of interior permanent magnet synchronous motor drive in flux-weakening operation , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[28]  A. M. Khambadkone,et al.  Response surface methodology based design optimisation of interior permanent magnet synchronous motors for wide-speed operation , 2004 .

[29]  F. Meibody-Tabar,et al.  A self organizing intelligent controller for speed and torque control of a PMSM , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[30]  M. Sanada,et al.  Influence of Rotor Configuration on Sensorless Control for Interior Permanent Magnet Synchronous Motors , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[31]  M.A. Abido,et al.  Development and implementation of a hybrid intelligent controller for interior permanent magnet synchronous motor drive , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[32]  R. Mohammdi-Milasi,et al.  Speed control of an interior permanent magnet synchronous motor using belbic (brain emotional learning based intelligent controller) , 2004, Proceedings World Automation Congress, 2004..

[33]  Gyu-Hong Kang,et al.  Nonlinear characteristic analysis of interior type permanent magnet synchronous motor , 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).

[34]  Y. Takeda,et al.  Mechanical Sensorless Drives of IPMSM With Online Parameter Identification , 2005, IEEE Transactions on Industry Applications.

[35]  Ching-Tsai Pan,et al.  Voltage-Constraint-Tracking-Based Field-Weakening Control of IPM Synchronous Motor Drives , 2008, IEEE Transactions on Industrial Electronics.