Simulation and fabrication of integrated polystyrene microlens in microfluidic system

This paper presents a simple and quick method to integrate microlens with the microfluidics systems. The polystyrene (PS) based microlens is fabricated with the free surface thermal compression molding methods, a thin PS sheet with the microlens is bonded to a PMMA substrate which contains the laser ablated microchannels. The convex profiler of the microlens will give a magnified images of the microchannels for easier observation. Optical simulation software is being used for the design and simulation of the microlens to have optimal optical performance with the desired focal length. A microfluidic system with the integrated PS microlens is also fabricated for demonstration.

[1]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[2]  I. Nikolov,et al.  Analysis of the dispersion of optical plastic materials , 2007 .

[3]  Chih-Yuan Chang,et al.  Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping process , 2007 .

[4]  Jeng-Rong Ho,et al.  Fabrication of PDMS (polydimethylsiloxane) microlens and diffuser using replica molding , 2006 .

[5]  Fabrication of Microlens and Microlens Array on Polystyrene Using CO2 Laser , 2011 .

[6]  Yang Liu,et al.  Printed wax masks for 254 nm deep-UV pattering of PMMA-based microfluidics , 2012 .

[7]  Sen-Yue Yang,et al.  A roller embossing process for rapid fabrication of microlens arrays on glass substrates , 2006 .

[8]  Bingcheng Lin,et al.  Droplet microfluidics for characterizing the neurotoxin-induced responses in individual Caenorhabditis elegans. , 2010, Lab on a chip.

[9]  A. Lee,et al.  Droplet microfluidics. , 2008, Lab on a chip.

[10]  D. Weitz,et al.  Reduced UV light scattering in PDMS microfluidic devices. , 2011, Lab on a chip.

[11]  Sen-Yue Yang,et al.  Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold , 2006 .

[12]  Weisong Wang,et al.  Variable-focusing microlens with microfluidic chip , 2004 .

[13]  Roland Zengerle,et al.  Microfluidic platforms for lab-on-a-chip applications. , 2007, Lab on a chip.

[14]  Dana M Spence,et al.  Integration of multiple components in polystyrene-based microfluidic devices part I: fabrication and characterization. , 2013, The Analyst.

[15]  Hyeon Cheol Kim,et al.  Fabricaton of Poly(dimethylsiloxane) Microlens for Laser-Induced Fluorescence Detection , 2006 .