Accurate circuit model for predicting the performance of lead-acid AGM batteries

[1]  L.-A. Dessaint,et al.  A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles , 2007, 2007 IEEE Vehicle Power and Propulsion Conference.

[2]  C.M. Penalver,et al.  Fast lead-acid battery charge strategy , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[3]  Min Chen,et al.  Accurate electrical battery model capable of predicting runtime and I-V performance , 2006, IEEE Transactions on Energy Conversion.

[4]  P. P. J. van den Bosch,et al.  Prediction of Battery Behavior Subject to High-Rate Partial State of Charge , 2009, IEEE Transactions on Vehicular Technology.

[5]  Yoon-Ho Kim,et al.  Design of interface circuits with electrical battery models , 1997, IEEE Trans. Ind. Electron..

[6]  Chin-Sien Moo,et al.  State-of-charge estimation for lead-acid batteries based on dynamic open-circuit voltage , 2008, 2008 IEEE 2nd International Power and Energy Conference.

[7]  Mike Barnes,et al.  Two electrical models of the lead-acid battery used in a dynamic voltage restorer , 2003 .

[8]  Sun Zechang,et al.  A battery model including hysteresis for State-of-Charge estimation in Ni-MH battery , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[9]  N.K. Medora,et al.  An Enhanced Dynamic Battery Model of Lead-Acid Batteries Using Manufacturers' Data , 2006, INTELEC 06 - Twenty-Eighth International Telecommunications Energy Conference.