Interactive AR-assisted product disassembly sequence planning (ARDIS)

This paper presents a proof-of-concept novel near real-time interactive AR-assisted product disassembly sequence planning system (ARDIS) based on product information, such as interference matrix and 3D models. The system is developed using Unity and consists of three modules, including an intelligent disassembly sequence planning module, an automatic content authoring module and an intuitive augmented reality (AR) user interface (UI) with various features, such as a virtual panel for customisation and an option panel for sequence regeneration. Given the retrieval targets specified by a user, optimised disassembly sequences are computed using an evolutionary computing algorithm. For the sequences computed, the respective AR disassembly instruction sequences, such as 2D text instructions and animated 3D models, are generated dynamically based on a taxonomy that links each disassembly step in a sequence with the corresponding Unity templates that have been created beforehand. Hence, the need for manual authoring to provide AR disassembly guidance is reduced. If necessary, the user can request for alternative disassembly sequences which can be re-computed in near real-time. Several case studies have been carried out to demonstrate and evaluate the performance of the system within the laboratory environment.

[1]  Abdelmajid Benamara,et al.  “disassembly plan approach based on subassembly concept” , 2017 .

[2]  Surendra M. Gupta,et al.  Disassembly sequence planning for products with defective parts in product recovery , 1998 .

[3]  Yiming Rong,et al.  Intelligent disassembly planning: a review on its fundamental methodology , 2013 .

[4]  Duc Truong Pham,et al.  Robotic disassembly sequence planning using enhanced discrete bees algorithm in remanufacturing , 2018, Int. J. Prod. Res..

[5]  Peihua Gu,et al.  Integrated multi-layer representation and ant colony search for product selective disassembly planning , 2016, Comput. Ind..

[6]  Duan Guanghong,et al.  A genetic algorithm for product disassembly sequence planning , 2008 .

[7]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[8]  Arthur C. Sanderson,et al.  Planning repair sequences using the AND/OR graph representation of assembly plans , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[9]  Utpal Roy,et al.  Disassembly information model incorporating dynamic capabilities for disassembly sequence generation , 2013 .

[10]  Gunther Reinhart,et al.  Integrating Augmented Reality in the Assembly Domain - Fundamentals, Benefits and Applications , 2003 .

[11]  J.J. Briceno,et al.  Automatic Disassembly Plan Generation from CAD Assembly Models , 2007, 2007 IEEE International Symposium on Assembly and Manufacturing.

[12]  M. Kanthababu,et al.  Generating complete disassembly sequences by utilising two-dimensional views , 2015 .

[13]  Antonija Mitrovic,et al.  Intelligent Augmented Reality Training for Motherboard Assembly , 2015, International Journal of Artificial Intelligence in Education.

[14]  Soh-Khim Ong,et al.  Design for assembly and disassembly for remanufacturing , 2016 .

[15]  Alfred J.D. Lambert Optimal disassembly of complex products , 1994 .

[16]  Uwe Dombrowski,et al.  Analysis and Integration of Design for X Approaches in Lean Design as basis for a Lifecycle Optimized Product Design , 2014 .

[17]  Liang Gao,et al.  Disassembly sequence planning using a Simplified Teaching-Learning-Based Optimization algorithm , 2014, Adv. Eng. Informatics.

[18]  Dong-Ho Lee,et al.  Selective disassembly sequencing with random operation times in parallel disassembly environment , 2018, Int. J. Prod. Res..

[19]  Surendra M. Gupta,et al.  Remanufacturing Modeling and Analysis , 2012 .

[20]  Sun Youchao,et al.  Disassembly sequence planning for maintenance based on metaheuristic method , 2011 .

[21]  Sen Yang,et al.  Mechanical assembly assistance using marker-less augmented reality system , 2018 .

[22]  Duan Guanghong,et al.  A Genetic Algorithm for Product Disassembly Sequence Planning , 2006, 2006 IEEE International Conference on Engineering of Intelligent Systems.

[23]  Dieter Schmalstieg,et al.  Retargeting Technical Documentation to Augmented Reality , 2015, CHI.

[24]  Hung Da Wan,et al.  Disassembly planning and sequencing for end-of-life products with RFID enriched information , 2013 .

[25]  Sotiris Makris,et al.  Assembly support using AR technology based on automatic sequence generation , 2013 .

[26]  Hidefumi Wakamatsu,et al.  Disassembly Support System for Used Products Considering Destruction of Their Parts , 2010 .

[27]  Ronald Azuma,et al.  Recent Advances in Augmented Reality , 2001, IEEE Computer Graphics and Applications.

[28]  P. Dewhurst,et al.  Automatic Generation of Product Disassembly Sequences , 1991 .

[29]  Andrew Y. C. Nee,et al.  Augmented reality applications in design and manufacturing , 2012 .

[30]  Michele Germani,et al.  Applying data mining technique to disassembly sequence planning: a method to assess effective disassembly time of industrial products , 2019, Int. J. Prod. Res..

[31]  Diego Borro,et al.  Providing guidance for maintenance operations using automatic markerless Augmented Reality system , 2011, 2011 10th IEEE International Symposium on Mixed and Augmented Reality.

[32]  David Baudry,et al.  Augmented Industrial Maintenance (AIM): A Case Study for Evaluating and Comparing with Paper and Video Media Supports , 2016, AVR.

[33]  Marco Santochi,et al.  Computer Aided Disassembly Planning: State of the Art and Perspectives , 2002 .

[34]  W. Eversheim,et al.  A Key Issue in Product Life Cycle: Disassembly , 1993 .

[35]  Ruey-Shun Chen,et al.  A hybrid genetic algorithm approach on multi-objective of assembly planning problem , 2002 .

[36]  Soh-Khim Ong,et al.  AR-guided Product Disassembly for Maintenance and Remanufacturing , 2017 .

[37]  Moez Trigui,et al.  Optimization of disassembly sequence planning for preventive maintenance , 2017 .

[38]  Alessandro Ceruti,et al.  Semi-automatic Design for Disassembly Strategy Planning: An Augmented Reality Approach☆ , 2017 .

[39]  L. Amodeo,et al.  EOQ inventory models for disassembly systems with disposal and lost sales , 2018, Int. J. Prod. Res..

[40]  Ajd Fred Lambert,et al.  Disassembly sequencing: A survey , 2003 .

[41]  Judy M. Vance,et al.  Immersive Computing Technology to Investigate Tradeoffs Under Uncertainty in Disassembly Sequence Planning , 2014 .

[42]  Hiroshi Fujii,et al.  Disassembly operation support system with motion monitoring of a human operator , 2001 .