Experimental Investigation of the Influence of Confining Stress on Hard Rock Fragmentation Using a Conical Pick
暂无分享,去创建一个
[1] Jian Zhao,et al. Rock burst and slabbing failure and its influence on TBM excavation at headrace tunnels in Jinping II hydropower station , 2012 .
[2] P. Kaiser. ROCK MECHANICS CONSIDERATIONS FOR CONSTRUCTION OF DEEP TUNNELS IN BRITTLE ROCK , 2006 .
[3] Dongya Han,et al. The influence of confining stress on optimum spacing of TBM cutters for cutting granite , 2016 .
[4] Syd S. Peng,et al. Coal Mine Ground Control , 1978 .
[5] Leslie S. Gertsch,et al. Evaluation of saturation effects on drag pick cutting of a brittle sandstone from full scale linear cutting tests , 2013 .
[6] Jeen-Shang Lin,et al. On the critical failure mode transition depth for rock cutting , 2013 .
[7] Eugenio Oñate,et al. Discrete element simulation of rock cutting , 2011 .
[8] Sergej Hloch,et al. Wear Assessment of Conical Pick used in Coal Cutting Operation , 2015, Rock Mechanics and Rock Engineering.
[9] H. Tunçdemir,et al. A Model to Predict The Performance of tunnelling Machines Under Stressed Conditions , 2005 .
[10] Li Xi. Penetration and impact resistance of PDC cutters inclined at different attack angles , 2000 .
[11] Liangchi Zhang,et al. Estimating the Peak Indentation Force of the Edge Chipping of Rocks Using Single Point-Attack Pick , 2011 .
[12] Fei Zhao,et al. Studies on classification, criteria and control of rockbursts , 2012 .
[13] Xibing Li,et al. Experimental Study of Slabbing and Rockburst Induced by True-Triaxial Unloading and Local Dynamic Disturbance , 2016, Rock Mechanics and Rock Engineering.
[14] I. Evans,et al. Line spacing of picks for effective cutting , 1972 .
[15] Claudio Oggeri,et al. Laboratory tests to study the influence of rock stress confinement on the performances of TBM discs in tunnels , 2011 .
[16] Du Kun. PRELIMINARY STUDY FOR INDUCED FRACTURE AND NON-EXPLOSIVE CONTINUOUS MINING IN HIGH-GEOSTRESS HARD ROCK MINE—A CASE STUDY OF KAIYANG PHOSPHATE MINE , 2013 .
[17] S. Chattopadhyaya,et al. Characterization of Wear Mechanisms in Distorted Conical Picks After Coal Cutting , 2015, Rock Mechanics and Rock Engineering.
[18] K. G. Hurt,et al. Cutting efficiency and life of rock-cutting picks , 1985 .
[19] O. Acaroglu,et al. The effect of machine design parameters on the stability of a roadheader , 2007 .
[20] Youhong Tang,et al. Experimental and theoretical design for decreasing wear in conical picks in rotation-drilling cutting process , 2015 .
[21] Xibing Li,et al. Void fraction distribution in overburden disturbed by longwall mining of coal , 2016, Environmental Earth Sciences.
[22] Jeen-Shang Lin,et al. Finite element modeling of rock cutting and its fragmentation process , 2015 .
[23] Xibing Li,et al. Numerical investigation on fracturing behaviors of deep-buried opening under dynamic disturbance , 2016 .
[24] M. E. Breitrick. USING A ROADHEADER FOR UNDERGROUND GOLD MINING , 1998 .
[25] Xibing Li,et al. Mining-induced void distribution and application in the hydro-thermal investigation and control of an underground coal fire: A case study , 2016 .
[26] R. Q. Huang,et al. Analysis of dynamic disturbance on rock burst , 1999 .
[27] Nuri Ali Akcin,et al. Numerical simulation of rock cutting using the discrete element method , 2011 .
[28] Xiaohui Liu,et al. Experimental research on wear of conical pick interacting with coal-rock , 2017 .
[29] Hongsu Ma,et al. Numerical study of the effect of confining stress on rock fragmentation by TBM cutters , 2011 .
[30] Eugenio Oñate,et al. Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems , 2004 .
[31] Somnath Chattopadhyaya,et al. Performance Analysis of Two Different Conical Picks Used in Linear Cutting Operation of Coal , 2016 .
[32] I. Evans. A theory of the cutting force for point-attack picks , 1984 .
[33] Evert Hoek,et al. Practical estimates of rock mass strength , 1997 .
[34] Cemal Balci. Mechanical Excavation in Mining and Civil Industries , 2013 .
[35] Serdar Yasar,et al. A Novel Mobile Testing Equipment for Rock Cuttability Assessment: Vertical Rock Cutting Rig (VRCR) , 2017, Rock Mechanics and Rock Engineering.
[36] Qiuming Gong,et al. Study on rock mass boreability by TBM penetration test under different in situ stress conditions , 2014 .
[37] Q. Gong,et al. Study on the influence of confining stress on TBM performance in granite rock by linear cutting test , 2016 .
[38] Shaoquan Kou,et al. Numerical simulation of the cutting of inhomogeneous rocks , 1999 .
[39] Qiuming Gong,et al. Use of indentation tests to study the influence of confining stress on rock fragmentation by a TBM cutter , 2014 .
[40] Hongxiang Jiang,et al. Rock breaking of conical cutter with assistance of front and rear water jet , 2014 .
[41] E. Detournay,et al. Normal Wedge Indentation in Rocks with Lateral Confinement , 1998 .
[42] Nuh Bilgin,et al. Investigations into the mechanical cutting characteristics of some medium and high strength rocks , 1977 .
[43] M. He,et al. Rock burst process of limestone and its acoustic emission characteristics under true-triaxial unloading conditions , 2010 .
[44] H. Copur,et al. Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results , 2006 .
[45] R. M. Goktan,et al. Rock cuttability assessment using the concept of hybrid dynamic hardness (HDH) , 2015, Bulletin of Engineering Geology and the Environment.
[46] Liang Hong,et al. Innovative testing technique of rock subjected to coupled static and dynamic loads , 2008 .
[47] Resat Ulusay,et al. The ISRM suggested methods for rock characterization, testing and monitoring, 2007-2014 , 2015 .
[48] K G Hurt,et al. POINT ATTACK TOOLS: AN EVALUATION OF FUNCTION AND USE FOR ROCK CUTTING , 1981 .
[49] S. Chattopadhyaya,et al. Microstructural study of failure phenomena in WC 94%-Co 6% hard metal alloy tips of radial picks , 2017 .
[50] Claudio Oggeri,et al. Experimental and Numerical Studies on Rock Breaking with TBM Tools under High Stress Confinement , 2007 .
[51] Xia-Ting Feng,et al. Influence of End Effect on Rock Strength in True Triaxial Compression Test , 2017 .
[52] David A. Summers,et al. Energy Transmission of Down-Hole Hammer Tool and Its Conditionality , 2000 .
[53] Steven Bradshaw,et al. Discrete element simulation of tribological interactions in rock cutting , 2014 .
[54] Jamal Rostami,et al. A new linear cutting machine for assessing the rock-cutting performance of a pick cutter , 2016 .
[55] Zilong Zhou,et al. Mechanical properties of rock under coupled static-dynamic loads , 2009 .
[56] Cemal Balci,et al. Effects of Different Cutting Patterns and Experimental Conditions on the Performance of a Conical Drag Tool , 2017, Rock Mechanics and Rock Engineering.
[57] Cemal Balci,et al. Correlative study of linear small and full-scale rock cutting tests to select mechanized excavation machines , 2007 .