Reactivity of transition metal (Co, Ni, Cu) sulphides versus lithium: The intriguing case of the copper sulphide

Transmission electron microscopy (TEM), in situ X-ray diffraction (XRD) and electrochemical techniques have been used to study the electrochemical reactivity of transition metal (cobalt, nickel, and copper) sulphides. We show that cobalt and nickel sulphides react versus lithium through conversion reactions similarly to their homologous oxides with during the discharge step the formation of metallic nano-particles embedded in Li2S that on the following charge convert back into sulphides. In contrast, the electrochemical reactivity of CuS towards Li was shown to follow a displacement reaction leading to the growth and disappearance of large copper dendrites with a concomitant reversible decomposition/re-crystallization of the initial electrode material. We show from structural considerations that this mechanism is nested in the creation of Cu2−xS phases, since intermediary phases during cycling have both high copper mobility and a sulphur network close to that of Li2S. In spite of their attractive capacity, none of these compounds show good capacity retention over the studied voltage range (0 to 2.5 V); the main reason being rooted in the partial solubility of Li2S into the electrolyte.

[1]  Sang-Cheol Han,et al.  Nickel sulfide synthesized by ball milling as an attractive cathode material for rechargeable lithium batteries , 2003 .

[2]  P. Balaya,et al.  Li-Storage via Heterogeneous Reaction in Selected Binary Metal Fluorides and Oxides , 2004 .

[3]  V. Rajamani,et al.  Refinement of the structure of Co 9 S 8 , 1975 .

[4]  J. Tarascon,et al.  Rationalization of the Low-Potential Reactivity of 3d-Metal-Based Inorganic Compounds toward Li , 2002 .

[5]  Joachim Maier,et al.  Reversible Formation and Decomposition of LiF Clusters Using Transition Metal Fluorides as Precursors and Their Application in Rechargeable Li Batteries , 2003 .

[6]  J. Gabano,et al.  D‐Size Lithium Cupric Sulfide Cells , 1972 .

[7]  R. Jasinski,et al.  Cathodic Discharge of Nickel Sulfide in a Propylene Carbonate ‐ LiClO4 Electrolyte , 1969 .

[8]  G. Brauer Handbook of Preparative Inorganic Chemistry , 1963 .

[9]  J. Tarascon,et al.  Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries , 2000, Nature.

[10]  B. Scrosati,et al.  Electrochemical Behavior of Solid Cathode Materials in Organic Electrolyte Lithium Batteries: Copper Sulfides , 1984 .

[11]  M. Thackeray,et al.  Intermetallic Insertion Electrodes with a Zinc Blende‐Type Structure for Li Batteries: A Study of Li x InSb ( 0 ≤ x ≤ 3 ) , 1999 .

[12]  Christopher S. Johnson,et al.  Electrochemistry and in-situ x-ray diffraction of InSb in lithium batteries. , 2000 .

[13]  D. Linden Handbook Of Batteries , 2001 .

[14]  Ying Wang,et al.  Electrochemical Reaction of Lithium with Cobalt Fluoride Thin Film Electrode , 2005 .

[15]  J. Tarascon,et al.  Study of the Reactivity Mechanism of M3B2O6 (with M = Co, Ni, and Cu) toward Lithium , 2003 .

[16]  R. Schöllhorn,et al.  Solid-solid transitions in electrode processes: electron/proton-transfer reactions , 1996 .

[17]  H. Sohn,et al.  Electrochemical behaviors of CuS as a cathode material for lithium secondary batteries , 2002 .

[18]  Sang-Cheol Han,et al.  Electrochemical properties of NiS as a cathode material for rechargeable lithium batteries prepared by mechanical alloying , 2003 .

[19]  W. Klemm,et al.  Magnetochemische Untersuchungen. VIII. Die Konstitution. Einiger einfacher Kobalt‐ und Nickelverbindungen, beurteilt auf Grund ihres magnetischen Verhaltens , 1933 .

[20]  Sang-Cheol Han,et al.  Charge–discharge mechanism of mechanically alloyed NiS used as a cathode in rechargeable lithium batteries , 2003 .

[21]  Glenn G. Amatucci,et al.  Structure and Electrochemistry of Carbon-Metal Fluoride Nanocomposites Fabricated by Solid-State Redox Conversion Reaction , 2005 .

[22]  J. Dahn,et al.  The Electrochemical Displacement Reaction of Lithium with Metal Oxides , 2001 .

[23]  M. Fleet The crystal structure of a-Ni7S6 , 1972 .

[24]  J. Tarascon,et al.  An update on the reactivity of nanoparticles Co-based compounds towards Li , 2003 .

[25]  J. Tarascon,et al.  A reversible copper extrusion–insertion electrode for rechargeable Li batteries , 2003, Nature materials.

[26]  A. Etienne Electrochemical Method to Measure the Copper Ionic Diffusivity in a Copper Sulfide Scale , 1970 .

[27]  F. Favier,et al.  Electrochemical Reactivity of Cu3 P with Lithium , 2004 .

[28]  Ying Wang,et al.  Electrochemical Reactions of Lithium with Transition Metal Nitride Electrodes , 2004 .

[29]  M. Morcrette,et al.  The LixMPn4 phases (M/Pn = Ti/P, V/As): new negative electrode materials for lithium ion rechargeable batteries , 2004 .

[30]  Glenn G. Amatucci,et al.  Carbon Metal Fluoride Nanocomposites High-Capacity Reversible Metal Fluoride Conversion Materials as Rechargeable Positive Electrodes for Li Batteries , 2003 .

[31]  Lisa C. Klein,et al.  Electrochemistry of Cu3N with Lithium: A Complex System with Parallel Processes , 2003 .

[32]  G. Eichinger,et al.  Copper based electrodes in organic electrolyte solutions—III. The discharge mechanism of copper(II) sulphide in some organic solvents , 1975 .

[33]  H. G. Meier,et al.  Influence of the Composition on the Copper Diffusion in Copper Sulfides Study by Impedance Spectroscopy , 1999 .

[34]  J. Tarascon,et al.  A Transmission Electron Microscopy Study of the Reactivity Mechanism of Tailor-Made CuO Particles toward Lithium , 2001 .