LTCC Layer-to-Layer Misalignment-Tolerant Coupled Inductors and Their Application to Bandpass Filter and Helical Inductors

Mutual inductance between coupled inductors can provide large equivalent series inductance required by filter design. As mutual inductance is dependent on the distance between coupled metal lines within coupled inductors, mutual inductance in traditional straight line coupled inductors (SLCI) is susceptible to layer-to-layer misalignment during fabrication if two coupled lines are located at different substrate layers. Misalignment-tolerant coupled inductors (MaTCI) are proposed to alleviate the effect of misalignment on mutual inductance. Circuit model is also proposed to describe their mechanism. Their performance is verified and compared with traditional SLCI using coupled inductors based transmission zero circuits and bandpass filters. Measurement results of three samples of a transmission zero circuit based on proposed MaTCI show only 0.56% frequency variation at 1.9 GHz, while traditional SLCI give about 3.2% variation from samples at the same low temperature cofired ceramic substrate. Measured results of three samples of a bandpass filter using MaTCI also show more stable performance at transmission zero frequency, insertion loss and passband bandwidth as compared with the filter using traditional SLCI. Electromagnetic simulation also shows similar performance improvement for MaTCI under misalignment. The same concept is also applied to helical inductor and two misalignment tolerant helical inductors are proposed. Simulation results show that they are more stable than the traditional stacked helical inductor.

[1]  Chul Soon Park,et al.  A Fully Embedded 60-GHz Novel BPF for LTCC System-in-Package Applications , 2006, IEEE Transactions on Advanced Packaging.

[2]  R. Flynt,et al.  Alignment tolerant stripline directional couplers , 1997, 1997 IEEE MTT-S International Microwave Symposium Digest.

[3]  Hsin-Chia Lu,et al.  LTCC layer-to-layer misalignment resistant coupled inductor and bandpass filter , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[4]  T. Nishino,et al.  A displacement-error monitor of a multi-layer LTCC module , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[5]  Hsin-Chia Lu,et al.  Capacitor and coupled inductor with high process tolerance in LTCC , 2006, 2006 International Microsystems, Package, Assembly Conference Taiwan.

[6]  Richard Ulrich,et al.  Advanced electronic packaging , 2006 .

[7]  Ke-Li Wu,et al.  A compact second-order LTCC bandpass filter with two finite transmission zeros , 2003 .

[8]  Cheng-Kok Koh,et al.  Exact closed-form formula for partial mutual inductances of rectangular conductors , 2003 .

[9]  H. Oh-hashi,et al.  90 Degree Tandem Hybrid with Tolerance to Displacement Error and Thickness Variation in Multi-layered Substrate , 2006, 2006 European Microwave Conference.

[10]  Frederick Warren Grover,et al.  Inductance Calculations: Working Formulas and Tables , 1981 .

[11]  Joy Laskar,et al.  Design of miniature multilayer on-package integrated image-reject filters , 2003 .

[12]  Keun Heo,et al.  Characterization and Wideband Modeling of Miniaturized LTCC Helical Inductors , 2007, IEEE Microwave and Wireless Components Letters.

[13]  Chul Soon Park,et al.  A Fully Embedded LTCC Multilayer BPF for 3-D Integration of 40-GHz Radio , 2007, IEEE Transactions on Advanced Packaging.

[14]  Ruey-Beei Wu,et al.  Inductance and resistance computations for three-dimensional multiconductor interconnection structures , 1992 .