High efficiency solution-processed thin-film Cu(In,Ga)(Se,S)2 solar cells

The polycrystalline chalcopyrite Cu(In,Ga)(Se,S)2 (CIGS) solar cell has been considered one of the most promising alternatives to conventional silicon solar cells, due to its achieving the highest power conversion efficiency (PCE) among all the thin-film photovoltaic technologies, potentially lowered production cost and compatibility with large area flexible substrates. Unfortunately, almost all the high efficiency CIGS devices are presently fabricated via vacuum-based techniques, which still require expensive facilities and high power consumption, thus leaving the fabrication cost issue unresolved. Herein, a hydrazine-based, solution processed CIGS device with high performance has been demonstrated through the construction of a composition grading profile of the CIGS absorber layer, which enhances the charge collection efficiency and maximizes the solar spectrum absorption. ZnO nanoparticles (ZnO NP), as the window layer, are proven to be an ideal alternative to sputtered ZnO, benefiting from high optical transparency, smooth and defectless interface, adjacent to the CIGS absorber layer. The CIGS solar cell with a certified PCE of 17.3% is achieved, which is the world record efficiency for solution-based CIGS solar cells, and also shortens the efficiency gap towards vacuum-based devices.

[1]  Rakesh Agrawal,et al.  Synthesis and characterization of 15% efficient CIGSSe solar cells from nanoparticle inks , 2015 .

[2]  P. Holloway,et al.  High-efficiency light-emitting devices based on quantum dots with tailored nanostructures , 2013, Nature Photonics.

[3]  Patrick R. Brown,et al.  Quantum-dot size and thin-film dielectric constant: precision measurement and disparity with simple models. , 2015, Nano letters.

[4]  Wei Wang,et al.  Optical designs that improve the efficiency of Cu2ZnSn(S,Se)4 solar cells , 2014 .

[5]  R. Collins,et al.  Non‐destructive optical analysis of band gap profile, crystalline phase, and grain size for Cu(In,Ga)Se2 solar cells deposited by 1‐stage, 2‐stage, and 3‐stage co‐evaporation , 2014 .

[6]  Yang Yang,et al.  Current–voltage characteristics of fully solution processed high performance CuIn(S,Se)2 solar cells: Crossover and red kink , 2014 .

[7]  Debora Keller,et al.  Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells. , 2013, Nature materials.

[8]  Tayfun Gokmen,et al.  Solution‐processed Cu(In,Ga)(S,Se)2 absorber yielding a 15.2% efficient solar cell , 2013 .

[9]  Bao Lei,et al.  Solution‐Processed TiO2 Nanoparticles as the Window Layer for CuIn(S,Se)2 Devices , 2012 .

[10]  C. Feldmann,et al.  Citrate-Capped Cu11In9 Nanoparticles and Its Use for Thin-Film Manufacturing of CIS Solar Cells , 2011 .

[11]  D. Hariskos,et al.  New world record efficiency for Cu(In,Ga)Se2 thin‐film solar cells beyond 20% , 2011 .

[12]  Shiro Nishiwaki,et al.  Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films. , 2011, Nature materials.

[13]  P. Holloway,et al.  Stable and efficient quantum-dot light-emitting diodes based on solution-processed multilayer structures , 2011 .

[14]  D. Güttler,et al.  Modification of the three-stage evaporation process for CuIn1−xGaxSe2 absorber deposition , 2011 .

[15]  JunHo Kim,et al.  Structural analysis of CIGS film prepared by chemical spray deposition , 2011 .

[16]  Wei Liu,et al.  A High‐Efficiency Solution‐Deposited Thin‐Film Photovoltaic Device , 2008 .

[17]  I. Repins,et al.  19·9%‐efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor , 2008 .

[18]  Dielectric functions of Si nanocrystals embedded in a SiO 2 matrix , 2003 .

[19]  Rommel Noufi,et al.  Optimization of CBD CdS process in high-efficiency Cu(In, Ga)Se2-based solar cells , 2002 .

[20]  J. Werner,et al.  Back surface band gap gradings in Cu(In, Ga)Se2 solar cells , 2001 .

[21]  J. Sites,et al.  Thin-film CuIn1−xGaxSe2 photovoltaic cells from solution-based precursor layers , 1999 .

[22]  Uwe Rau,et al.  Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells–recent achievements, current understanding, and future challenges , 1999 .

[23]  Su-Huai Wei,et al.  Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties , 1998 .

[24]  A. Zunger,et al.  Defect physics of the CuInSe 2 chalcopyrite semiconductor , 1998 .

[25]  Rommel Noufi,et al.  HIGH-EFFICIENCY CUINXGA1-XSE2 SOLAR CELLS MADE FROM (INX,GA1-X)2SE3 PRECURSOR FILMS , 1994 .