Thermography-Based Deterioration Detection in Concrete Bridge Girders Strengthened with Carbon Fiber-Reinforced Polymer

In bridge structures worldwide, carbon fiber-reinforced polymer (CFRP) sheets are applied to strengthen weak components, especially concrete girders that are at a high risk of rapid degradation during the bridge’s operation owing to impacts from the superstructure’s weight and traffic loads. Regarding the thermography-based method (TM), although deteriorations in the concrete core are some of the main defects in concrete structures strengthened with CFRP, these do not receive as much attention as damage in the CFRP. Therefore, the interpretation of the structural health in terms of these defects using TM is still unclear. The problem presented in this work addresses the quantification of delamination inside the concrete part of a specimen with a CFRP sheet installed on the surface (assumed to be the girder surface strengthened with CFRP) via step heating thermography. Additionally, the empirical thermal diffusivity of concrete girders strengthened with a CFRP sheet (CSC girder), has not been provided previously, is proposed in the present study to predict delamination depths used for field investigations. Moreover, the effect of the CFRP sheet installed on the structure’s surface on the absolute contrast of delamination is clarified. Finally, advanced post-processing algorithms, i.e., thermal signal reconstruction and pulsed phase thermography, are applied to images obtained with step heating thermography to enhance the visibility of delamination in CSC girders.

[1]  Riadh Al-Mahaidi,et al.  Bond defect detection using PTT IRT in concrete structures strengthened with different CFRP systems , 2014 .

[2]  M. A. Starnes.  Development of technical bases for using infrared thermography for nondestructive evaluation of fiber reinforced polymer composites bonded to concrete , 2002 .

[3]  Yuan Yao,et al.  Defect detection in CFRP structures using pulsed thermographic data enhanced by penalized least squares methods , 2015 .

[4]  J. LaFountain.  Inc. , 2013, American Art.

[5]  Shuhei Hiasa,et al.  Investigation of effective utilization of infrared thermography (IRT) through advanced finite element modeling , 2017 .

[6]  Jose Miguel Lopez-Higuera,et al.  Quantification by Signal to Noise Ratio of Active Infrared Thermography Data Processing Techniques , 2013 .

[7]  Yang Wang,et al.  Barker-coded modulation laser thermography for CFRP laminates delamination detection , 2019, Infrared Physics & Technology.

[8]  Jungwon Huh,et al.  Detection of Delamination with Various Width-to-depth Ratios in Concrete Bridge Deck Using Passive IRT: Limits and Applicability , 2019, Materials.

[9]  JE Kretzmanna,et al.  Non-destructive Testing with Transient Thermography on Composite Materials , 2016 .

[10]  Shigeki Unjoh,et al.  Detectability of delamination regions using infrared thermography in concrete members strengthened by CFRP jacketing , 2020 .

[11]  Elton Bauer,et al.  Criteria for Identification of Ceramic Detachments in Building Facades with Infrared Thermography , 2016 .

[12]  Bin Liu,et al.  Quantitative Evaluation of Pulsed Thermography, Lock-in Thermography and Vibrothermography on Foreign Object Defect (FOD) in CFRP , 2016, Sensors.

[13]  Tielin Shi,et al.  A novel approach for flip chip solder joint inspection based on pulsed phase thermography , 2011 .

[14]  X. Maldague,et al.  New absolute contrast for pulsed thermography , 2002 .

[15]  Hassan Baji,et al.  A comparative study on factors affecting time to cover cracking as a service life indicator , 2018 .

[16]  Ivana Banjad Pecur,et al.  Review of Active IR Thermography for Detection and Characterization of Defects in Reinforced Concrete , 2016, J. Imaging.

[17]  K. K. Lee,et al.  A study of full-field debond behaviour and durability of CFRP-concrete composite beams by pulsed infrared thermography (IRT) , 2012 .

[18]  Chih-Hung Chiang,et al.  Defect detection of concrete structures using both infrared thermography and elastic waves , 2008 .

[19]  Pietro Burrascano,et al.  Halogen optical referred pulse-compression thermography for defect detection of CFRP , 2019, Infrared Physics & Technology.

[20]  Kara Peters,et al.  Depth Detection of Bond Defects in Multilayered Externally Bonded CFRP-to-Concrete Using Pulse Phase Thermography , 2015 .

[21]  Ralf Arndt,et al.  Square pulse thermography in frequency domain as adaptation of pulsed phase thermography for qualitative and quantitative applications in cultural heritage and civil engineering , 2010 .

[22]  Cory A. Larsen.  Document Flash Thermography , 2011 .

[23]  Achintya Haldar,et al.  Effects of Ambient Temperature and Relative Humidity on Subsurface Defect Detection in Concrete Structures by Active Thermal Imaging , 2017, Sensors.

[24]  C. S. Poon,et al.  Characterization of the deterioration of externally bonded CFRP-concrete composites using quantitative infrared thermography , 2010 .

[25]  Darryl P Almond,et al.  An analytical study of the pulsed thermography defect detection limit , 2012 .

[26]  Yunze He,et al.  A Review of Microwave Thermography Nondestructive Testing and Evaluation , 2017, Sensors.

[27]  Jungwon Huh,et al.  Effects of rebars on the detectability of subsurface defects in concrete bridges using square pulse thermography , 2018, NDT & E International.

[28]  Jungwon Huh,et al.  Detectability of Subsurface Defects with Different Width-to-Depth Ratios in Concrete Structures Using Pulsed Thermography , 2018 .

[29]  M. Lizaranzu,et al.  Non-destructive testing of composite materials by means of active thermography-based tools , 2015 .

[30]  Yuan Yao,et al.  Improved non-destructive testing of carbon fiber reinforced polymer (CFRP) composites using pulsed thermograph , 2015 .

[31]  Matthew K. Graeff,et al.  The Repair of Damaged Bridge Girders with Carbon Fiber Reinforced Polymer "CFRP" Laminates , 2012 .

[32]  Khatereh Vaghefi,et al.  Infrared Thermography Enhancements for Concrete Bridge Evaluation , 2013 .

[33]  Vlatko Bosiljkov,et al.  Determination of the applicability and limits of void and delamination detection in concrete structures using infrared thermography , 2015 .

[34]  Quang Tran,et al.  Detectability of Delamination in Concrete Structure Using Active Infrared Thermography in Terms of Signal-to-Noise Ratio , 2018, Applied Sciences.

[35]  J. Skála,et al.  Quantitative evaluation of active thermography using contrast-to-noise ratio. , 2018, Applied optics.

[36]  I. N. Shardakov,et al.  Delamination of carbon-fiber strengthening layer from concrete beam during deformation (infrared thermography) , 2016 .

[37]  Ray Kai Leung Su,et al.  Concrete cover delamination model for non-uniform corrosion of reinforcements , 2019, Construction and Building Materials.

[38]  Clemente Ibarra-Castanedo,et al.  Automatic Interpolated Differentiated Absolute Contrast Algorithm for the Analysis of Pulsed Thermographic Sequences , 2004 .

[39]  Davide Palumbo,et al.  A Quantitative Comparison Among Different Algorithms for Defects Detection on Aluminum with the Pulsed Thermography Technique , 2018, Metals.

[40]  P Cikrle,et al.  Comparison of infrared thermography, ground-penetrating radar and ultrasonic pulse echo for detecting delaminations in concrete bridges , 2019, Construction and Building Materials.

[41]  V. P. Vavilov,et al.  Pulsed thermal NDT of materials: back to the basics , 2007 .

[42]  David G. Pollock,et al.  Detection of Voids in Prestressed Concrete Bridges using Thermal Imaging and Ground-Penetrating Radar , 2008 .

[43]  Moncef L. Nehdi,et al.  Infrared thermography model for automated detection of delamination in RC bridge decks , 2018 .

[44]  Riadh Al-Mahaidi,et al.  Defect size measurement and far distance infrared detection in CFRP-concrete and CFRP-steel systems , 2016 .

[45]  Christopher Brooke,et al.  Thermal Imaging for the Archaeological Investigation of Historic Buildings , 2018, Remote. Sens..

[46]  Shuhei Hiasa.  Investigation of infrared thermography for subsurface damage detection of concrete structures , 2016 .

[47]  F Wayne Klaiber,et al.  Methods of Strengthening Existing Highway Bridges , 1987 .

[48]  V. P. Vavilov,et al.  Review of pulsed thermal NDT: Physical principles, theory and data processing , 2015 .

[49]  Theodore E. Matikas,et al.  Current injection phase thermography for low-velocity impact damage identification in composite laminates , 2014 .

[50]  Riadh Al-Mahaidi,et al.  Detection of cracks in concrete strengthened with CFRP systems using infra-red thermography , 2014 .

[51]  Vladimir P. Vavilov,et al.  Thermal NDT research at Tomsk Polytechnic University , 2016 .

[52]  Ray Kai Leung Su,et al.  A double-cylinder model incorporating confinement effects for the analysis of corrosion-caused cover cracking in reinforced concrete structures , 2015 .

[53]  Jungwon Huh,et al.  Experimental Study on Detection of Deterioration in Concrete Using Infrared Thermography Technique , 2016 .

[54]  Shangtong Yang,et al.  Time to surface cracking and crack width of reinforced concrete structures under corrosion of multiple rebars , 2017 .

[55]  Michael Forde,et al.  International Practice Using NDE for the Inspection of Concrete and Masonry Arch Bridges , 2010 .