Investigation on hardening behavior of metallic glass under cyclic indentation loading via molecular dynamics simulation

Abstract Mechanical behavior of a Cu-Zr metallic glass (MG) under cyclic indentation loading is investigated via molecular dynamics simulation. A large-depth indentation after cycling is conducted, and the indentation curves show that hardening behavior occurs with cyclic indentation amplitudes exceeding elastic range. The atomic Von Mises shear strain distributions during the large-depth indentation are investigated, and the pre-existing plastic deformation induced by cyclic indentation is found to be the main contributor to the hardening behavior. By monitoring the atom trajectories and Voronoi atom volume, structure densification and free volume reduction phenomenon are found in the area beneath indenter after cycles. The accumulations of irreversible shear strain during cycling induce the area beneath indenter experience atom structure transition and become densified, thus the sample becomes more resistant to further deformation. In addition, the effects of temperatures and loading rates on the hardening behavior are studied. With higher temperature, more homogenous deformation and plasticity are produced, and then inducing more severe hardening in the MG. While with lower loading rate, the hardening phenomenon is found to be less severe because of the localization of shear strain during cycling.

[1]  G. P. Zhang,et al.  Effect of annealing close to Tg on notch fracture toughness of Pd-based thin-film metallic glass for MEMS applications , 2006 .

[2]  T. Hufnagel,et al.  Mechanical behavior of amorphous alloys , 2007 .

[3]  C. Schuh,et al.  Atomistic mechanisms of cyclic hardening in metallic glass , 2012 .

[4]  Yun-Che Wang,et al.  Indentation Behavior of Zr-Based Metallic-Glass Films via Molecular-Dynamics Simulations , 2010 .

[5]  Fengzhou Fang,et al.  Study of nanoindentation behavior of amorphous alloy using molecular dynamics , 2014 .

[6]  J. Langer,et al.  Dynamics of viscoplastic deformation in amorphous solids , 1997, cond-mat/9712114.

[7]  Yun-Che Wang,et al.  Indentation properties of Cu-Zr-Al metallic-glass thin films at elevated temperatures via molecular dynamics simulation , 2015 .

[8]  X. D. Wang,et al.  Non-localized deformation in metallic alloys with amorphous structure , 2014 .

[9]  J. Eckert,et al.  Deformation behavior of metallic glass composites reinforced with shape memory nanowires studied via molecular dynamics simulations , 2015 .

[10]  C. Packard,et al.  Hardening of a metallic glass during cyclic loading in the elastic range , 2008 .

[11]  Feng Yan,et al.  Mesoscopic examination of cyclic hardening in metallic glass , 2015 .

[12]  S. Luo,et al.  Improved ductility of Cu64Zr36 metallic glass/Cu nanocomposites via phase and grain boundaries , 2016, Nanotechnology.

[13]  U. Ramamurty,et al.  Room-temperature anelasticity and viscoplasticity of Cu–Zr bulk metallic glasses evaluated using nanoindentation , 2013 .

[14]  Yunfeng Shi,et al.  Stress-induced structural transformation and shear banding during simulated nanoindentation of a metallic glass , 2007 .

[15]  K. Jacobsen,et al.  Computer simulations of nanoindentation in Mg–Cu and Cu–Zr metallic glasses , 2010 .

[16]  Jianchao Ye,et al.  Structural inhomogeneity and anelastic deformation in metallic glasses revealed by spherical nanoindentation , 2010 .

[17]  Hu Huang,et al.  Indenter Geometry Affecting Indentation Behaviors of the Zr-Based Bulk Metallic Glass , 2014 .

[18]  Mingwei Chen,et al.  Mechanical Behavior of Metallic Glasses: Microscopic Understanding of Strength and Ductility , 2008 .

[19]  Christopher A. Schuh,et al.  Initiation of shear bands near a stress concentration in metallic glass , 2007 .

[20]  F. Fang,et al.  Molecular dynamics simulations of nanoindentation of monocrystalline germanium , 2012, Applied Physics A.

[21]  C. Su,et al.  Plane strain indentation of a Zr-based metallic glass: Experiments and numerical simulation , 2006 .

[22]  Christopher A. Schuh,et al.  A nanoindentation study of serrated flow in bulk metallic glasses , 2003 .

[23]  J. Schroers,et al.  Thermoplastic forming of bulk metallic glass—Applications for MEMS and microstructure fabrication , 2007 .

[24]  Jörg Stadler,et al.  IMD: A Software Package for Molecular Dynamics Studies on Parallel Computers , 1997 .

[25]  E. Ma,et al.  Correlation between the elastic modulus and the intrinsic plastic behavior of metallic glasses: The roles of atomic configuration and alloy composition , 2009 .

[26]  Li-Min Wang,et al.  Atomic structure of shear bands in Cu64Zr36 metallic glasses studied by molecular dynamics simulations , 2015 .

[27]  M. Kramer,et al.  Development of suitable interatomic potentials for simulation of liquid and amorphous Cu–Zr alloys , 2009 .

[28]  J. C. Huang,et al.  Thin film metallic glasses: Unique properties and potential applications , 2012 .

[29]  N. Al-Aqeeli.  Strengthening behavior due to cyclic elastic loading in Pd-based metallic glass , 2011 .

[30]  C. Packard,et al.  Cyclic hardening of metallic glasses under Hertzian contacts: Experiments and STZ dynamics simulations , 2010 .

[31]  Christopher A. Schuh,et al.  Deformation of metallic glasses: Recent developments in theory, simulations, and experiments , 2016 .

[32]  Kwang-Ryeol Lee,et al.  Networked interpenetrating connections of icosahedra: Effects on shear transformations in metallic glass , 2011 .

[33]  Shin-Pon Ju,et al.  Assessing the interfacial strength of an amorphous–crystalline interface , 2013 .

[34]  H. Bei,et al.  Theoretical strength and the onset of plasticity in bulk metallic glasses investigated by nanoindentation with a spherical indenter. , 2004, Physical review letters.