The effects of processing conditions on the surface morphology and hydrophobicity of polyvinylidene fluoride membranes prepared via vapor-induced phase separation

Abstract The present investigation reveals how the surface morphology and the hydrophobicity of polyvinylidene fluoride (PVDF) membranes, which were prepared via a vapor-induced phase separation method, were affected by the initial PVDF content in the casting solution and the air temperature. The surface morphology was characterized with scanning electron microscopy. A ternary phase diagram of PVDF/N, N-dimethylacetamide/water was constructed to explain the formation mechanism of the different morphologies. The results show that different membrane morphologies and hydrophobicities can be obtained by changing the processing conditions. Low air temperature and high PVDF contents facilitate the crystallization process, resulting in the formation of a porous skin and particle morphology, which increases the hydrophobicity of the surface. High air temperature and low PVDF contents are favorable for the formation of a net-like surface morphology via spinodal decomposition and lead to a superhydrophobic surface. Theoretical calculations were performed to testify that the net-like surface was more favorable for superhydrophobicity than the particle-based surface.

[1]  Xuefeng Gao,et al.  Biophysics: Water-repellent legs of water striders , 2004, Nature.

[2]  Hideto Matsuyama,et al.  Membrane formation via phase separation induced by penetration of nonsolvent from vapor phase. I. Phase diagram and mass transfer process , 1999 .

[3]  M. Khayet.  Membranes and theoretical modeling of membrane distillation: a review. , 2011, Advances in colloid and interface science.

[4]  Mohamed Khayet,et al.  A framework for better understanding membrane distillation separation process , 2006 .

[5]  Juin-Yih Lai,et al.  Insight into the preparation of poly(vinylidene fluoride) membranes by vapor-induced phase separation , 2010 .

[6]  Yonglie Wu,et al.  An experimental study on membrane distillation-crystallization for treating waste water in taurine production☆ , 1991 .

[7]  Zhaolin Gu,et al.  Application of vacuum membrane distillation to lithium bromide absorption refrigeration system , 2009 .

[8]  Jin Zhai,et al.  Super-hydrophobic surfaces: From natural to artificial , 2002 .

[9]  L. Cheng,et al.  Prediction of EVAL membrane morphologies using the phase diagram of water-DMSO-EVAL at different temperatures , 1999 .

[10]  L. Feng,et al.  Facile Creation of a Super‐Amphiphobic Coating Surface with Bionic Microstructure , 2004 .

[11]  L. Cheng,et al.  Mechanisms of PVDF membrane formation by immersion-precipitation in soft (1-octanol) and harsh (water) nonsolvents , 1999 .

[12]  Kamalesh K. Sirkar,et al.  Novel membrane and device for vacuum membrane distillation-based desalination process , 2005 .

[13]  Mohamed Khayet,et al.  Porous hydrophobic/hydrophilic composite membranes: Application in desalination using direct contact membrane distillation , 2005 .

[14]  A. B. de Haan,et al.  Water recycling and desalination by air gap membrane distillation , 2005 .

[15]  L. Cheng.  Effect of Temperature on the Formation of Microporous PVDF Membranes by Precipitation from 1-Octanol/DMF/PVDF and Water/DMF/PVDF Systems , 1999 .

[16]  J. Lai,et al.  Interplay of mass transfer, phase separation, and membrane morphology in vapor-induced phase separation , 2009 .

[17]  Na Tang,et al.  Preparation and morphological characterization of narrow pore size distributed polypropylene hydrophobic membranes for vacuum membrane distillation via thermally induced phase separation , 2010 .

[18]  K. Sirkar,et al.  Novel membrane and device for direct contact membrane distillation-based desalination process , 2004 .

[19]  L. Cheng,et al.  Microporous PVDF membrane formation by immersion precipitation from water/TEP/PVDF system☆ , 2002 .

[20]  Hoosung Lee,et al.  Phase separation of polymer casting solution by nonsolvent vapor , 2004 .

[21]  P. Menut,et al.  Poly(ether imide) membrane formation by water vapour induced phase inversion , 2002 .

[22]  Qiang Zheng,et al.  Porous poly(vinylidene fluoride) membrane with highly hydrophobic surface , 2005 .

[23]  Da-Ming Wang,et al.  Retainment of pore connectivity in membranes prepared with vapor-induced phase separation , 2010 .

[24]  M. Khayet.  Membrane surface modification and characterization by X-ray photoelectron spectroscopy, atomic force microscopy and contact angle measurements , 2004 .

[25]  E. Drioli,et al.  Controlled pore size, thickness and surface free energy of super-hydrophobic PVDF® and Hyflon®AD membranes , 2006 .

[26]  Y. Kang,et al.  Membrane formation by water vapor induced phase inversion , 1999 .

[27]  Shichang Wang,et al.  Experimental study of membrane distillation with brine circulated in the cold side , 2001 .

[28]  Jun-de Li,et al.  Identification of material and physical features of membrane distillation membranes for high performance desalination , 2010 .

[29]  Experimental Study and Design of a Submerged Membrane Distillation Bioreactor , 2009 .

[30]  E. Drioli,et al.  Potential of membrane distillation in seawater desalination: Thermal efficiency, sensitivity study and cost estimation , 2008 .

[31]  Hongwei Fan,et al.  Effects of exposure time on variations in the structure and hydrophobicity of polyvinylidene fluoride membranes prepared via vapor-induced phase separation , 2012 .

[32]  V. M. Nikulin,et al.  Treatment of waste water for removing heavy metals by membrane distillation , 1994 .

[33]  Rong Wang,et al.  Factors affecting pore structure and performance of poly(vinylidene fluoride-co-hexafluoro propylene) asymmetric porous membrane , 2006 .

[34]  Sina Bonyadi,et al.  Flux enhancement in membrane distillation by fabrication of dual layer hydrophilic–hydrophobic hollow fiber membranes , 2007 .

[35]  Mohamed Khayet,et al.  Porous hydrophobic/hydrophilic composite membranes: Estimation of the hydrophobic-layer thickness , 2005 .

[36]  Jian Xu,et al.  One step preparation of superhydrophobic polymeric surface with polystyrene under ambient atmosphere. , 2008, Journal of colloid and interface science.

[37]  Jun-de Li,et al.  Performance of asymmetric hollow fibre membranes in membrane distillation under various configurations and vacuum enhancement , 2010 .