Ultra thin layers as new concepts for corrosion inhibition and adhesion promotion

Abstract The adsorption and self-organization process as well as the surface reactions of several bifunctional adhesion promoters on different oxide surfaces have been investigated. The aim was to improve the adhesion between metal oxides and different organic coatings. We developed a large number of bifunctional compounds, which are able to adsorb spontaneously on different pre-treated metal (oxide) surfaces. The second group can be designed for grafting different otherwise incompatible layers. Therefore, a special two-step procedure has been developed: (1) adsorption of the designed bifunctional molecules on the substrate and (2) surface reaction of the terminal reactive group with a polymeric top coating or with further monomers resulting in a strongly bond composite. For this purpose substances were chosen having a surface reactive group, an aliphatic spacer and a reactive group for a suitable top layer. Phosphonic acids forming strong bonds with several metal surfaces were chosen as surface-active groups on metal oxide substrates. The termination of these compounds with further reactive groups opened a wide range of possible applications. Functionalities like amino or carboxylic groups allowed reactions with commercial lacquers (e.g., polyurethane) for improving adhesion promotion and corrosion inhibition of the metal substrates. By using polymerizable groups like thiophene and pyrrole an in situ surface polymerization with further monomers is possible directly on the substrate. The adsorbed films of bifunctional phosphonic acids on metal (oxide) substrates were characterized by contact angle measurements, X-ray photoelectron spectroscopy (XPS), the surface polymerized films were investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), cyclovoltammetry (CV), and electrochemical impedance spectroscopy (EIS). The results showed that monolayers were formed, which were correctly oriented on the surfaces: the phosphonic acid group was attached to the substrate whereas the terminal group was free standing for further reactions. Surface polymerization with additional monomer was possible either chemically or electrochemically resulting in smooth polymer layers of adjustable thickness. The conducting polymers were found to be p-conductive with a doping level of about 30%. Conductivity measurements revealed a conductivity of about 0.13 S/cm for the best films. Based on this principle two possible applications are given: firstly, a corrosion protecting system for steel, and secondly, a model release system for protecting steel after damage of the coating.

[1]  A. Pich,et al.  Synthesis and characterization of polypyrrole dispersions prepared with different dopants , 2004 .

[2]  Ralph G. Nuzzo,et al.  Spontaneously organized molecular assemblies. 1. Formation, dynamics, and physical properties of n-alkanoic acids adsorbed from solution on an oxidized aluminum surface , 1985 .

[3]  L. Reven,et al.  A dynamic view of self-assembled monolayers. , 2000, Accounts of chemical research.

[4]  A. Pich,et al.  Synthesis and characterization of nanometer-sized polypyrrole composites , 2003 .

[5]  Christian Jung,et al.  Self-assembling adhesion promoters for corrosion resistant metal polymer interfaces , 1998 .

[6]  A. Ulman,et al.  Formation and Structure of Self-Assembled Monolayers. , 1996, Chemical reviews.

[7]  J. V. Alsten.  Self-Assembled Monolayers on Engineering Metals: Structure, Derivatization, and Utility , 1999 .

[8]  Michael Rohwerder,et al.  On the development of polypyrrole coatings with self-healing properties for iron corrosion protection , 2005 .

[9]  S. Oberoi,et al.  Bifunctional adhesion promoter for grafting polypyrrole films on metal/metal oxide surfaces , 2004 .

[10]  P. T. Nguyen,et al.  Protection of mild steel by modification with thin films of polymethylthiophene , 2001 .

[11]  M. Wolter,et al.  Adhesion promoters for polythiophene , 2001 .

[12]  Y. Tao.  Structural comparison of self-assembled monolayers of n-alkanoic acids on the surfaces of silver, copper, and aluminum , 1993 .

[13]  S. Oberoi,et al.  Ultrathin layers for adhesion promotion , 2003 .

[14]  K. Wynne,et al.  Poly(pyrrol-2-ylium tosylate), electrochemical synthesis and physical and mechanical properties , 1985 .

[15]  Olof Forsén,et al.  An XPS and AFM study of polypyrrole coating on mild steel , 1997 .

[16]  Gernot Busch,et al.  Synthesis of adhesion promoters for grafting polythiophene onto metal oxides , 2002 .

[17]  N. Koch,et al.  Self-Assembly and Bonding of Alkanephosphonic Acids on the Native Oxide Surface of Titanium , 2001 .

[18]  D. K. Schwartz,et al.  Self-assembled monolayers in the context of epitaxial film growth , 2001 .

[19]  Pierre-Camille Lacaze,et al.  Electropolymerization of pyrrole in propylene carbonate on zinc electrodes modified by heteropolyanions , 1994 .

[20]  N. E. Schlotter,et al.  Formation and structure of a spontaneously adsorbed monolayer of arachidic on silver , 1986 .

[21]  G. Whitesides,et al.  Self-Assembled Monolayers of Long-Chain Hydroxamic Acids on the Native Oxides of Metals , 1995 .

[22]  J. Bennett,et al.  Introduction to Surface Roughness and Scattering , 1999 .

[23]  G. Whitesides,et al.  Unconventional Methods for Fabricating and Patterning Nanostructures. , 1999, Chemical reviews.

[24]  D. Briggs,et al.  High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database , 1992 .

[25]  Thomas E. Mallouk,et al.  LAYERED METAL PHOSPHATES AND PHOSPHONATES : FROM CRYSTALS TO MONOLAYERS , 1992 .