Cementitious composites integrated phase change materials for passive buildings: An overview

[1]  Xiangsheng Chen,et al.  Study on the thermal and mechanical properties of steel fibre reinforced PCM-HSB concrete for high performance in energy piles , 2022, Construction and Building Materials.

[2]  Zhiguo Wang,et al.  Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones , 2022, Energy and Buildings.

[3]  Velraj Ramalingam,et al.  Optimal positioning of phase change material and insulation through numerical investigations to reduce cooling loads in office buildings , 2022, Journal of Energy Storage.

[4]  A. Gounni,et al.  Impact of COVID-19 restrictions on building energy consumption using Phase Change Materials (PCM) and insulation: A case study in six climatic zones of Morocco , 2022, Journal of Energy Storage.

[5]  Saleh Mohammadi,et al.  Impacts of phase change materials on performance of operational peak load shifting strategies in a sample building in hot‐arid climate , 2022, Environmental Progress & Sustainable Energy.

[6]  G. Fang,et al.  Encapsulation of inorganic phase change thermal storage materials and its effect on thermophysical properties: A review , 2022, Solar Energy Materials and Solar Cells.

[7]  Haemin Song,et al.  Proposed specific heat capacity model for a concrete wall containing phase change material (PCM) under field experiment conditions , 2022, Construction and Building Materials.

[8]  J. Selvaraj,et al.  Thermal conductivity, reliability, and stability assessment of phase change material (PCM) doped with functionalized multi-wall carbon nanotubes (FMWCNTs) , 2022, Journal of Energy Storage.

[9]  F. Pennec,et al.  Supercooling of phase change materials: A review , 2022, Renewable and Sustainable Energy Reviews.

[10]  Jun Li,et al.  Preparation and thermal performance of phase change material (PCM) foamed cement used for the roof , 2022, Journal of Building Engineering.

[11]  V. Tyagi,et al.  Nano additive enhanced salt hydrate phase change materials for thermal energy storage , 2022, International Materials Reviews.

[12]  Daniel C W Tsang,et al.  Preparation and thermal conductivity enhancement of a paraffin wax-based composite phase change material doped with garlic stem biochar microparticles. , 2022, The Science of the total environment.

[13]  Shaokun Song,et al.  An eco-friendly and facile montmorillonite nanosheets aerogel based phase change materials for efficient solar-to-thermal energy conversion , 2022, Energy Conversion and Management.

[14]  Pushpendra Kumar Singh Rathore,et al.  Thermal performance of the building envelope integrated with phase change material for thermal energy storage: an updated review , 2022, Sustainable Cities and Society.

[15]  Beom Yeol Yun,et al.  Evaluation of thermal/morphological performance of SSPCM based nanoclay: Influence of the interlayer microstructure of hydrophilic and hydrophobic , 2022, Solar Energy Materials and Solar Cells.

[16]  Adnan I. Khdair,et al.  Developing building enhanced with PCM to reduce energy consumption , 2021, Journal of Building Engineering.

[17]  A. Sari,et al.  Porous biochar/heptadecane composite phase change material with leak-proof, high thermal energy storage capacity and enhanced thermal conductivity , 2021, Powder Technology.

[18]  Xuelai Zhang,et al.  Optimal selection of thickeners for the phase change material of Na2S2O3·5H2O–CH3COONa·3H2O , 2021, Journal of Thermal Analysis and Calorimetry.

[19]  Beom Yeol Yun,et al.  Evaluation of thermal properties of phase change material-integrated artificial stone according to biochar loading content , 2021, Construction and Building Materials.

[20]  Linhua Jiang,et al.  Preparation and characterization of capric-stearic acid/montmorillonite/graphene composite phase change material for thermal energy storage in buildings , 2021 .

[21]  A. Haddad,et al.  Methodology to reduce cooling energy consumption by incorporating PCM envelopes: A case study of a dwelling in Chile , 2021, Building and Environment.

[22]  Ying Chen,et al.  Flame-retardant and form-stable phase change composites based on MXene with high thermostability and thermal conductivity for thermal energy storage , 2021 .

[23]  Adewale Odukomaiya,et al.  Evaluation of Phase Change Plaster/Paste Composites for Building Envelopes , 2021, Energy and Buildings.

[24]  S. Cesari,et al.  Study on thermal performance of a PCM enhanced hydronic radiant floor heating system , 2021 .

[25]  S. Memon,et al.  Effect of Phase Change Materials on the Thermal Performance of Residential Building Located in Different Cities of a Tropical Rainforest Climate Zone , 2021 .

[26]  Waiching Tang,et al.  Parametric analysis and optimisation of energy efficiency of a lightweight building integrated with different configurations and types of PCM , 2021 .

[27]  A. Eidan,et al.  The influence of integrated Micro-ZnO and Nano-CuO particles/paraffin wax as a thermal booster on the performance of heat pipe evacuated solar tube collector , 2021 .

[28]  Ji Hun Park,et al.  Energy retrofit of PCM-applied apartment buildings considering building orientation and height , 2021 .

[29]  F. Xue,et al.  Multi-factor analysis on thermal comfort and energy saving potential for PCM-integrated buildings in summer , 2021, Energy and Buildings.

[30]  M. Mehrali,et al.  Simultaneous solar-thermal energy harvesting and storage via shape stabilized salt hydrate phase change material , 2021 .

[31]  Z. Quan,et al.  Experimental research on the performance of ice thermal energy storage device based on micro heat pipe arrays , 2020 .

[32]  Yanfeng Liu,et al.  Preparation and characterizations of a novel temperature-tuned phase change material based on sodium acetate trihydrate for improved performance of heat pump systems , 2020 .

[33]  Waiching Tang,et al.  Development of a stable inorganic phase change material for thermal energy storage in buildings , 2020 .

[34]  Xiaojian Gao,et al.  Incorporation of phase change material and carbon nanofibers into lightweight aggregate concrete for thermal energy regulation in buildings , 2020 .

[35]  Jia-ping Liu,et al.  Micro-/macro-level optimization of phase change material panel in building envelope , 2020 .

[36]  Hussain H. Alzoubi,et al.  Performance of cementitious composites with nano PCMs and cellulose nano fibers , 2020 .

[37]  S. Memon,et al.  Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate , 2020 .

[38]  Z. Tao,et al.  Inclusion of methyl stearate/diatomite composite in gypsum board ceiling for building energy conservation , 2020 .

[39]  Zhi-gang Peng,et al.  Preparation of low hydration heat cement slurry with micro-encapsulated thermal control material , 2019, Energy.

[40]  Shuangfeng Wang,et al.  Preparation and properties of phase change temperature-tuned composite phase change material based on sodium acetate trihydrate–urea/fumed silica for radiant floor heating system , 2019, Applied Thermal Engineering.

[41]  Fahad Saleem Ahmed Khan,et al.  Synthesis of organic phase change materials (PCM) for energy storage applications: A review , 2019, Nano-Structures & Nano-Objects.

[42]  J. Torrenti,et al.  Optimization of concrete mix design to account for strength and hydration heat in massive concrete structures , 2019, Cement and Concrete Composites.

[43]  J. Fang,et al.  Preparation and modification of novel phase change material Na2SO4·10H2O-Na2HPO4·12H2O binary eutectic hydrate salt , 2019, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[44]  Zhizhu He,et al.  Shape-remodeled macrocapsule of phase change materials for thermal energy storage and thermal management , 2019, Applied Energy.

[45]  Waiching Tang,et al.  Development of high performance PCM cement composites for passive solar buildings , 2019, Energy and Buildings.

[46]  A. Susilawati,et al.  Effect of cooling water temperature and space between cooling pipes of post-cooling system on temperature and thermal stress in mass concrete , 2019, Journal of Building Engineering.

[47]  Yingbin Wang,et al.  Development of spherical α-Al2O3-based composite phase change materials (PCMs) and its utilization in thermal storage building materials , 2019, Thermochimica Acta.

[48]  Seong Jin Chang,et al.  An experimental study on applying organic PCMs to gypsum-cement board for improving thermal performance of buildings in different climates , 2019, Energy and Buildings.

[49]  Gaochuang Cai,et al.  Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars , 2019, Cement and Concrete Research.

[50]  W. Zhan,et al.  A novel core-shell structural montmorillonite nanosheets/stearic acid composite PCM for great promotion of thermal energy storage properties , 2019, Solar Energy Materials and Solar Cells.

[51]  Waiching Tang,et al.  Investigation of the Role of Nano-Titanium on Corrosion and Thermal Performance of Structural Concrete with Macro-Encapsulated PCM , 2019, Molecules.

[52]  M. Lanzón,et al.  Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials , 2019, Construction and Building Materials.

[53]  Jae D. Chang,et al.  Optimization of phase change materials to improve energy performance within thermal comfort range in the South Korean climate , 2019, Energy and Buildings.

[54]  Hang Yu,et al.  Preparation and characterization of PMMA/TiO2 hybrid shell microencapsulated PCMs for thermal energy storage , 2019, Energy.

[55]  Guochen Sang,et al.  Development of a novel sulphoalumitate cement-based composite combing fine steel fibers and phase change materials for thermal energy storage , 2019, Energy and Buildings.

[56]  Zhengguo Zhang,et al.  Two types of composite phase change panels containing a ternary hydrated salt mixture for use in building envelope and ventilation system , 2018, Energy Conversion and Management.

[57]  Zhonghao Rao,et al.  Experimental study on thermal properties and thermal performance of eutectic hydrated salts/expanded perlite form-stable phase change materials for passive solar energy utilization , 2018, Solar Energy Materials and Solar Cells.

[58]  Hongwei Deng,et al.  Development of calcium silicate-coated expanded clay based form-stable phase change materials for enhancing thermal and mechanical properties of cement-based composite , 2018, Solar Energy.

[59]  Hongwei Deng,et al.  Use of calcium silicate-coated paraffin/expanded perlite materials to improve the thermal performance of cement mortar , 2018, Construction and Building Materials.

[60]  T. Y. Lo,et al.  Thermal and Mechanical Properties of Expanded Graphite/Paraffin Gypsum-Based Composite Material Reinforced by Carbon Fiber , 2018, Materials.

[61]  Tingting Yang,et al.  A review on macro-encapsulated phase change material for building envelope applications , 2018, Building and Environment.

[62]  Waiching Tang,et al.  Experimental Investigation on Graphene Oxide/SrCl2·6H2O Modified CaCl2·6H2O and the Resulting Thermal Performances , 2018, Materials.

[63]  Carlos Salas-Bringas,et al.  Thermal performance and numerical simulation of geopolymer concrete containing different types of thermoregulating materials for passive building applications , 2018, Energy and Buildings.

[64]  Rosolino Vaiana,et al.  Mechanical and Thermal Performance of Macro-Encapsulated Phase Change Materials for Pavement Application , 2018, Materials.

[65]  Zhi-gang Peng,et al.  Controlling the heat evaluation of cement slurry system used in natural gas hydrate layer by micro-encapsulated phase change materials , 2018, Solar Energy.

[66]  Bing Zhang,et al.  Storing solar energy within Ag-Paraffin@Halloysite microspheres as a novel self-heating catalyst , 2018, Applied Energy.

[67]  J. Sanjayan,et al.  Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets , 2018, Energy and Buildings.

[68]  Luca Valentini,et al.  Physical and mechanical properties of fly ash and slag geopolymer concrete containing different types of micro-encapsulated phase change materials , 2018, Construction and Building Materials.

[69]  L. Cabeza,et al.  Effect of PCM on the Hydration Process of Cement-Based Mixtures: A Novel Thermo-Mechanical Investigation , 2018, Materials.

[70]  A. Kjøniksen,et al.  Influence of microcapsule size and shell polarity on thermal and mechanical properties of thermoregulating geopolymer concrete for passive building applications , 2018 .

[71]  M. Fang,et al.  Preparation and thermal properties of fatty acid/diatomite form-stable composite phase change material for thermal energy storage , 2018 .

[72]  Yingni Yang,et al.  Preparation and thermal properties of polyethylene glycol/expanded graphite as novel form-stable phase change material for indoor energy saving , 2018 .

[73]  Rui Wang,et al.  Preparation and properties of fatty acids based thermal energy storage aggregate concrete , 2018 .

[74]  Zhengguo Zhang,et al.  A polymer-coated calcium chloride hexahydrate/expanded graphite composite phase change material with enhanced thermal reliability and good applicability , 2018 .

[75]  Luisa F. Cabeza,et al.  Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation , 2018 .

[76]  Waiching Tang,et al.  Experimental study of carbon fiber reinforced alkali-activated slag composites with micro-encapsulated PCM for energy storage , 2018 .

[77]  Zhaohui Huang,et al.  Preparation and characterization of capric-palmitic-stearic acid ternary eutectic mixture/expanded vermiculite composites as form-stabilized thermal energy storage materials , 2018 .

[78]  Yue Shen,et al.  Calcium Chloride Hexahydrate/Diatomite/Paraffin as Composite Shape-Stabilized Phase-Change Material for Thermal Energy Storage , 2017 .

[79]  Jay G. Sanjayan,et al.  Thermal performance assessment of phase change material integrated cementitious composites in buildings: Experimental and numerical approach , 2017 .

[80]  Jay G. Sanjayan,et al.  Development of thermal energy storage cementitious composites (TESC) containing a novel paraffin/hydrophobic expanded perlite composite phase change material , 2017 .

[81]  Waiching Tang,et al.  Development of novel composite PCM for thermal energy storage using CaCl2·6H2O with graphene oxide and SrCl2·6H2O , 2017 .

[82]  Paulina Faria,et al.  Production of eco-efficient earth-based plasters: Influence of composition on physical performance and bio-susceptibility , 2017 .

[83]  Luca Valentini,et al.  Mechanical properties and microscale changes of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials , 2017 .

[84]  Luisa F. Cabeza,et al.  Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings , 2017 .

[85]  Seunghwan Wi,et al.  Development of thermal enhanced n-octadecane/porous nano carbon-based materials using 3-step filtered vacuum impregnation method , 2017 .

[86]  Laurent Pilon,et al.  Early-age temperature evolutions in concrete pavements containing microencapsulated phase change materials , 2017 .

[87]  A. Arora,et al.  Numerical simulations to quantify the influence of phase change materials (PCMs) on the early- and later-age thermal response of concrete pavements , 2017 .

[88]  Erik Schlangen,et al.  Influence of Microencapsulated Phase Change Material (PCM) Addition on (Micro) Mechanical Properties of Cement Paste , 2017, Materials.

[89]  H. Cui,et al.  Thermal Properties of Cement-Based Composites for Geothermal Energy Applications , 2017, Materials.

[90]  Xuejuan Wan,et al.  Carbon nanotube-enhanced double-walled phase-change microcapsules for thermal energy storage , 2017 .

[91]  H. Cui,et al.  Design and Preparation of Carbon Based Composite Phase Change Material for Energy Piles , 2017, Materials.

[92]  Min Li,et al.  Carbon nanotube/paraffin/montmorillonite composite phase change material for thermal energy storage , 2017, Solar energy.

[93]  A. Sari,et al.  Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes , 2017 .

[94]  Yushi Liu,et al.  Preparation and thermal properties of Na2CO3·10H2O-Na2HPO4·12H2O eutectic hydrate salt as a novel phase change material for energy storage , 2017 .

[95]  Carlos Salas-Bringas,et al.  Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications , 2017 .

[96]  G. Fang,et al.  Synthesis and properties of microencapsulated octadecane with silica shell as shape–stabilized thermal energy storage materials , 2017 .

[97]  Yushi Liu,et al.  Use of nano-α-Al2O3 to improve binary eutectic hydrated salt as phase change material , 2017 .

[98]  G. Fang,et al.  Synthesis and thermal properties of the MA/HDPE composites with nano-additives as form-stable PCM with improved thermal conductivity , 2016 .

[99]  Shuangfeng Wang,et al.  Enhancement on thermal properties of paraffin/calcium carbonate phase change microcapsules with carbon network , 2016 .

[100]  M. Farid,et al.  A novel calcium chloride hexahydrate-based deep eutectic solvent as a phase change materials , 2016 .

[101]  Tuan Ngo,et al.  Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials , 2016 .

[102]  Ahmet Sarı,et al.  Thermal regulating performance of gypsum/(C18-C24) composite phase change material (CPCM) for building energy storage applications , 2016 .

[103]  Feng Xing,et al.  Energy and economic analysis of building integrated with PCM in different cities of China , 2016 .

[104]  Yali Li,et al.  Thermal conductivity enhancement of polyethylene glycol/expanded vermiculite shape-stabilized composite phase change materials with silver nanowire for thermal energy storage , 2016 .

[105]  T. Akiyama,et al.  Microencapsulation of phase change materials with binary cores and calcium carbonate shell for thermal energy storage , 2016 .

[106]  H. Cui,et al.  A novel phase-change cement composite for thermal energy storage: Fabrication, thermal and mechanical properties , 2016 .

[107]  M. S. Naghavi,et al.  From rice husk to high performance shape stabilized phase change materials for thermal energy storage , 2016 .

[108]  M. Fang,et al.  Synthesis and characterization of lauric acid/expanded vermiculite as form-stabilized thermal energy storage materials , 2016 .

[109]  Jiawei Lei,et al.  Energy performance of building envelopes integrated with phase change materials for cooling load reduction in tropical Singapore , 2016 .

[110]  Waiching Tang,et al.  Development of Hollow Steel Ball Macro-Encapsulated PCM for Thermal Energy Storage Concrete , 2016, Materials.

[111]  Dan Sun,et al.  Utilization of paraffin/expanded perlite materials to improve mechanical and thermal properties of cement mortar , 2015 .

[112]  Hongyan Ma,et al.  Paraffin/expanded vermiculite composite phase change material as aggregate for developing lightweight thermal energy storage cement-based composites , 2015 .

[113]  Seong Jin Chang,et al.  Thermal properties of shape-stabilized phase change materials using fatty acid ester and exfoliated graphite nanoplatelets for saving energy in buildings , 2015 .

[114]  Halime Paksoy,et al.  Thermal enhancement of concrete by adding bio-based fatty acids as phase change materials , 2015 .

[115]  Jay G. Sanjayan,et al.  A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites , 2015 .

[116]  Xuming Mi,et al.  Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials , 2015 .

[117]  Z. Zainal,et al.  Shape-stabilised n-octadecane/activated carbon nanocomposite phase change material for thermal energy storage , 2015 .

[118]  Jinhong Li,et al.  Preparation of paraffin/expanded vermiculite with enhanced thermal conductivity by implanting network carbon in vermiculite layers , 2015 .

[119]  Aaron R. Sakulich,et al.  Application of phase change materials to improve the thermal performance of cementitious material , 2015 .

[120]  Seong Jin Chang,et al.  Energy efficient thermal storage montmorillonite with phase change material containing exfoliated graphite nanoplatelets , 2015 .

[121]  Shazim Ali Memon,et al.  Development of structural–functional integrated concrete with macro-encapsulated PCM for thermal energy storage , 2015 .

[122]  Shazim Ali Memon,et al.  Development, mechanical properties and numerical simulation of macro encapsulated thermal energy storage concrete , 2015 .

[123]  Sumin Kim,et al.  Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings , 2015 .

[124]  David Nortershauser,et al.  Mechanical and thermo-physical behaviour of concretes and mortars containing phase change material , 2015 .

[125]  Jinhong Li,et al.  Enhanced thermal conductivity of PEG/diatomite shape-stabilized phase change materials with Ag nanoparticles for thermal energy storage , 2015 .

[126]  H. Cui,et al.  Development of Carbon Nanotube Modified Cement Paste with Microencapsulated Phase-Change Material for Structural–Functional Integrated Application , 2015, International journal of molecular sciences.

[127]  António Tadeu,et al.  Mortars based in different binders with incorporation of phase-change materials: Physical and mechanical properties , 2015 .

[128]  Shazim Ali Memon,et al.  Development of Composite PCMs by Incorporation of Paraffin into Various Building Materials , 2015, Materials.

[129]  Xiaodong Wang,et al.  Phase-change characteristics and thermal performance of form-stable n-alkanes/silica composite phase change materials fabricated by sodium silicate precursor , 2015 .

[130]  Feng Xing,et al.  Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete , 2015 .

[131]  Shazim Ali Memon,et al.  Thermophysical and Mechanical Properties of Hardened Cement Paste with Microencapsulated Phase Change Materials for Energy Storage , 2014, Materials.

[132]  Lijie Dong,et al.  Lauric acid/intercalated kaolinite as form-stable phase change material for thermal energy storage , 2014 .

[133]  Huaming Yang,et al.  Stearic acid hybridizing coal–series kaolin composite phase change material for thermal energy storage , 2014 .

[134]  Yu Zhao.  Effect of CNT/CNF on Thermal and Mechanical Properties of Cement Mortars , 2014 .

[135]  Yanping Yuan,et al.  Lauric–palmitic–stearic acid/expanded perlite composite as form-stable phase change material: Preparation and thermal properties , 2014 .

[136]  I. Krupa,et al.  Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials , 2014 .

[137]  G. Sant,et al.  On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials , 2014 .

[138]  Zongjin Li,et al.  Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites , 2014 .

[139]  Sabine Caré,et al.  Effect of phase change materials on the hydration reaction and kinetic of PCM-mortars , 2014, Journal of Thermal Analysis and Calorimetry.

[140]  Xiaodong Wang,et al.  New approach for sol–gel synthesis of microencapsulated n-octadecane phase change material with silica wall using sodium silicate precursor , 2014 .

[141]  Lei Cao,et al.  Synthesis and characterization of microencapsulated paraffin with titanium dioxide shell as shape-stabilized thermal energy storage materials in buildings , 2014 .

[142]  M. Hussein,et al.  Nano-encapsulated organic phase change material based on copolymer nanocomposites for thermal energy storage , 2014 .

[143]  Xiaodong Wang,et al.  Microencapsulation of n-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: Synthesis, microstructure, and performance evaluation , 2014 .

[144]  M. S. Naghavi,et al.  Preparation and characterization of palmitic acid/graphene nanoplatelets composite with remarkable thermal conductivity as a novel shape-stabilized phase change material , 2013 .

[145]  H. Cui,et al.  Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings , 2013 .

[146]  Haifeng Shi,et al.  Composite macrocapsule of phase change materials/expanded graphite for thermal energy storage , 2013 .

[147]  Cai Zhe,et al.  Experimental research on the use of phase change materials in perforated brick rooms for cooling storage , 2013 .

[148]  Zongjin Li,et al.  Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage , 2013 .

[149]  Zhishen Wu,et al.  Heat storage properties of the cement mortar incorporated with composite phase change material , 2013 .

[150]  R. Frost,et al.  Preparation and thermal energy storage properties of paraffin/calcined diatomite composites as form-stable phase change materials , 2013 .

[151]  Yi Wang,et al.  Effect of preparation methods on the structure and thermal properties of stearic acid/activated montmorillonite phase change materials , 2012 .

[152]  Huanzhi Zhang,et al.  Fabrication of microencapsulated phase change materials based on n-octadecane core and silica shell through interfacial polycondensation , 2011 .

[153]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[154]  Yulong Ding,et al.  A one-step method for producing microencapsulated phase change materials , 2010 .

[155]  Jun Wang,et al.  Heat conduction enhanced shape-stabilized paraffin/HDPE composite PCMs by graphite addition: Preparation and thermal properties , 2010 .

[156]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[157]  A. Sari,et al.  Preparation, characterization and thermal properties of lauric acid/expanded perlite as novel form-stable composite phase change material , 2009 .

[158]  H. Brouwers,et al.  The behavior of self-compacting concrete containing micro-encapsulated Phase Change Materials , 2009 .

[159]  A. Sari,et al.  Capric–myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage , 2008 .

[160]  Zhengguo Zhang,et al.  Study on preparation of montmorillonite-based composite phase change materials and their applications in thermal storage building materials , 2008 .

[161]  Kamil Kaygusuz,et al.  Capric acid and stearic acid mixture impregnated with gypsum wallboard for low‐temperature latent heat thermal energy storage , 2008 .

[162]  M. Ward,et al.  Effect of silica fume and fly ash on heat of hydration of Portland cement , 2002 .

[163]  Haydn H. Murray,et al.  Traditional and new applications for kaolin, smectite, and palygorskite: a general overview , 2000 .

[164]  A. Dasari,et al.  Salt hydrate phase change materials: Current state of art and the road ahead , 2022, Journal of Energy Storage.

[165]  N. Ahmad,et al.  Energy performance enhancement of residential buildings in Pakistan by integrating phase change materials in building envelopes , 2022, Energy Reports.

[166]  H. Cui,et al.  Thermo-mechanical properties of compaction molded cement-based composite containing a high mass fraction of phase change material for thermal energy storage , 2020 .

[167]  M. Yousefpour,et al.  The effect of ARB process on corrosion behavior of nanostructured aluminum alloys in Na2HPO4·12H2O and Zn(NO3)2·6H2O PCMs , 2020 .

[168]  Wei Lu,et al.  Parametric analysis of applying PCM wallboards for energy saving in high-rise lightweight buildings in Shanghai , 2019 .

[169]  Zhaowen Huang,et al.  Salt hydrate/expanded vermiculite composite as a form-stable phase change material for building energy storage , 2019, Solar Energy Materials and Solar Cells.

[170]  Jinhong Li,et al.  Octadecane/C-decorated diatomite composite phase change material with enhanced thermal conductivity as aggregate for developing structural–functional integrated cement for thermal energy storage , 2018 .

[171]  S. Marinhas,et al.  Development of Psychrometric diagram for the energy efficiency of Air Handling Units , 2018 .

[172]  Jinzhen Cao,et al.  Performance of a thermal energy storage composite by incorporating diatomite stabilized paraffin as phase change material , 2018 .

[173]  Yushi Liu,et al.  Form-stable phase change material based on Na2CO3·10H2O-Na2HPO4·12H2O eutectic hydrated salt/expanded graphite oxide composite: The influence of chemical structures of expanded graphite oxide , 2018 .

[174]  Jinhong Li,et al.  Polyethylene glycol-enwrapped silicon carbide nanowires network/expanded vermiculite composite phase change materials: Form stabilization, thermal energy storage behavior and thermal conductivity enhancement , 2018 .

[175]  Feng Xing,et al.  Development of structural-functional integrated energy storage concrete with innovative macro-encapsulated PCM by hollow steel ball , 2017 .

[176]  Mustapha Karkri,et al.  Thermal conductivity and latent heat thermal energy storage properties of LDPE/wax as a shape-stabilized composite phase change material , 2014 .