High Field Electroluminescence Characteristics of Pr$^{3+}$ -Doped ZnS/TiO$_{2}$

This paper reports the fabrication, operation, and applications of rare-earth (RE) ion praseodymium (Pr3+)-doped ZnS/TiO2 core-shell nanoparticle-based thin-film electroluminescent (ACTFEL) devices. Pr3+:ZnS/TiO2 ACTFEL devices showed white light emission due to impact excitation of the Pr3+ ions by hot carriers followed by radiative RE relaxation under the high field of alternating current. The preparation of Pr3+:ZnS/TiO2 core-shell nanoparticles was done by the colloidal synthesis method. To observe the effect of the TiO2 shell layer on electroluminescence (EL) brightness and properties of Pr3+:ZnS, three types of molar ratios 1:7:7, 9:5:5, and 1:14:14 of Ti:Zn:S were taken in the synthesis process, and to be employed for these three different thin-film EL devices for high-field EL measurements. Each EL device consists of glass substrate/ITO (indium-tin oxide)/TiO2 coated Pr3+-doped ZnS nanocrystalline emission layer/Al (aluminum). The brightness characteristics of Pr3+:ZnS/TiO2 TFELDs were evaluated as a function of bias and frequency. Brightness-voltage ( B-V) measurements at 600 Hz showed the maximum efficiency of the Pr3+:ZnS/TiO2 EL device at molar ratios 1:14:14 of Ti:Zn:S. To observe the frequency-dependent characteristics, the EL device was tested at various frequencies. The measurements showed the decrease in the threshold voltage of the EL device with increased frequencies. High-field voltage-current (V-I) characteristics also showed the frequency-dependent onset voltage and current density. It showed the minimum turn-on voltage and maximum current density at a higher frequency of 1000 Hz.

[1]  S. Carter,et al.  Local degradation of electroluminescent emission centers in ZnS:Cu,Cl phosphors , 2013 .

[2]  S. Yu,et al.  High electroluminescence of the ZnS:Mn nanoparticle/cyanoethyl-resin polymer/single-walled carbon nanotube composite using the tandem structure , 2012 .

[3]  M. Bredol,et al.  Materials for Powder-Based AC-Electroluminescence , 2010, Materials.

[4]  S. Kulinich,et al.  Preparation of semiconductor nanospheres by laser-induced phase separation , 2009 .

[5]  S. Tanimizu.  Principal phosphor materials and their optical properties , 2006, Fundamentals of Phosphors.

[6]  M. K. Naskar,et al.  Understanding the role of surfactants on the preparation of ZnS nanocrystals. , 2006, Journal of colloid and interface science.

[7]  A. Murugan,et al.  Photoluminescence properties of nanocrystalline ZnS on nanoporous silicon , 2006 .

[8]  S. Han,et al.  Crystal growth of electroluminescent ZnS:Cu,Cl phosphor and its TiO2 coating by sol–gel method for thick-film EL device , 2005 .

[9]  S. R. Vadera,et al.  Enhanced electroluminescence properties of doped ZnS nanorods formed by the self-assembly of colloidal nanocrystals , 2005 .

[10]  A. Steckl,et al.  Rare-earth-doped GaN: growth, properties, and fabrication of electroluminescent devices , 2002 .

[11]  P. Holloway,et al.  Microstructure and electroluminescence of ZnS:Mn doped with KCl , 2002 .

[12]  I. Brown,et al.  Crystal-field splitting of Pr3+ (4f 2) energy levels in GaN , 2001 .

[13]  Christopher J. Summers,et al.  Thin SiO_2 coating on ZnS phosphors for improved low-voltage cathodoluminescence properties , 2000 .

[14]  P. G. Piva,et al.  Enhanced degradation resistance of quantum dot lasers to radiation damage , 2000 .

[15]  Kang L. Wang,et al.  Changes in luminescence emission induced by proton irradiation: InGaAs/GaAs quantum wells and quantum dots , 2000 .

[16]  D. Keszler,et al.  Lanthanide doping in ZnS and SrS thin-film electroluminescent devices , 1999 .

[17]  Stephen M. Goodnick,et al.  High-field transport and electroluminescence in ZnS phosphor layers , 1998 .

[18]  C. Park,et al.  Luminescence characteristics of ZnS:Cu thin film electroluminescent devices fabricated by sputtering , 1998, Journal of Materials Science: Materials in Electronics.

[19]  B. Ju,et al.  Effect of an interlayer on the emission characteristics of a white‐light‐emitting electroluminescent device with a Pr and Ce doubly doped ZnS phosphor layer , 1996 .

[20]  E. Bringuier.  TENTATIVE ANATOMY OF ZNS-TYPE ELECTROLUMINESCENCE , 1994 .

[21]  K. Neyts,et al.  Analytical model for thin‐film electroluminescent devices , 1990 .

[22]  Y. Hamakawa,et al.  Voltage Dependence of Brightness in Rare-Earth Doped Electroluminescent ZnS Thin Film Devices , 1974 .

[23]  A Vecht,et al.  Direct current electroluminescence in ZnS , 1970 .

[24]  B. P. Chandra,et al.  ELECTRO- AND PHOTO-LUMINESCENCE STUDIES OF CdS NANOCRYSTALS PREPARED BY ORGENOMETALLIC PRECURSOR , 2008 .

[25]  Paul H. Holloway,et al.  The structure, device physics, and material properties of thin film electroluminescent displays , 1998 .

[26]  R. Tuenge.  Thin Film Electroluminescent Phosphors for Patterned Full-Color Displays , 1989 .