Mercury-free gold mining technologies: possibilities for adoption in the Guianas

Abstract The rudimentary nature of small-scale gold mining activities often generates a legacy of extensive degradation and deplorable social conditions, both during and after activities have ceased. Small-scale mining usually involves the extraction of secondary gold from placer deposits (alluvial, colluvial or elluvial), which can be liberated and treated using gravity methods. In the Guianas, the most popular form of small-scale gold mining is referred to as “land dredging”, a combination of hydraulicking and suction dredging. This method requires application of large volumes of water for both mining and mineral processing; in most cases, there are no containment structures for the waste tailings generated. Mercury, a dangerous pollutant, is the preferred method employed by small-scale miners for gold recovery. Gold extraction using mercury is comprised of the following four stages: (1) amalgamation, (2) separation of amalgamation, (3) removal of excess mercury, and (4) burning of the remaining amalgam to produce a gold sponge. Mercury can be released into the environment at each stage, which makes the promotion of mercury-free alternatives imperative. Technical alternatives for small-scale gold mining, however, must be thoroughly evaluated, pre-tested, modified accordingly and successfully transferred. Moreover, technology must be inexpensive, relatively simple and easy to adapt, while allowing a rapid rate of return. WWF-Guianas is working with the regulatory agencies and other relevant stakeholders of the Guianas to reduce the environmental footprints caused by small-scale mining. The major aspects of this program are to develop the capacity and regulatory mechanisms within the local government, to promote mercury-free technology, and monitor mercury in the environment. This paper reviews the alternative technologies being investigated by the WWF-Guianas for use in the small-scale gold mining industry.