Structural Response of Polyethylene Foam-Based Sandwich Panels Subjected to Edgewise Compression

This study analyzes the mechanical behavior of low density polyethylene foam core sandwich panels subjected to edgewise compression. In order to monitor panel response to buckling, strains generated in the facesheets and overall out-of-plane deformations are measured with strain gages and projection moiré, respectively. A finite element (FE) model simulating the experimental test is developed. Numerical results are compared with moiré measurements. After having been validated against experimental evidence, the FE model is parameterized, and a trade study is carried out to investigate to what extent the structural response of the panel depends on the sandwich wall construction and facesheet/core interface defects. The projection moiré set-up utilized in this research is able to capture the sudden and very localized buckling phenomena occurring under edgewise compression of foam-based sandwich panels. Results of parametric FE analyses indicate that, if the total thickness of the sandwich wall is fixed, including thicker facesheets in the laminate yields a larger deflection of the panel that becomes more sensitive to buckling. Furthermore, the mechanical response of the foam sandwich panel is found to be rather insensitive to the level of waviness of core-facesheet interfaces.

[1]  J. Vinson.  The Behavior of Sandwich Structures of Isotropic and Composite Materials , 1999 .

[2]  V. Rizov,et al.  Non-linear indentation behavior of foam core sandwich composite materials—A 2D approach , 2006 .

[3]  M. H. Aliabadi,et al.  Buckling and Postbuckling Structures: Experimental, Analytical and Numerical Studies , 2008 .

[4]  Federico M. Sciammarella,et al.  High Precision Contouring with Moiré and Related Methods: A Review , 2010 .

[5]  A Fleming Gary,et al.  Advances in Projection Moire Interferometry Development for Large Wind Tunnel Applications , 1999 .

[6]  Caterina Casavola,et al.  Experimental and Numerical Characterization of the Impact Response of Polyethylene Sandwich Panel: A Preliminary Study , 2011 .

[7]  Claudia Barile,et al.  Mechanical Characterization of SLM Specimens with Speckle Interferometry and Numerical Optimization , 2011 .

[8]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[9]  A. W. Burner,et al.  Comparison of Three Optical Methods for Measuring Model Deformation , 2000 .

[10]  Charles Meunier.  [High precision]. , 2008, Perspective infirmiere : revue officielle de l'Ordre des infirmieres et infirmiers du Quebec.

[11]  Andrey Shipsha,et al.  Indentation study of foam core sandwich composite panels , 2005 .

[12]  Carol Ann Featherston,et al.  The use of automated projection interferometry in monitoring aerofoil buckling , 2002 .

[13]  Cesar A. Sciammarella,et al.  General model for moiré contouring, part 2: applications , 2008 .

[14]  A. Shipsha,et al.  Effect of Physical Nonlinearity on Local Buckling in Sandwich Beams , 2010 .

[15]  Cesar A. Sciammarella,et al.  General model for moiré contouring, part 1: theory , 2008 .

[16]  E. Ghavanloo,et al.  Transient response of a submerged cylindrical foam core sandwich panel subjected to shock loading , 2011 .

[17]  D. Zenkert,et al.  Shear Cracks in Foam Core Sandwich Panels: Nondestructive Testing and Damage Assessment , 1992 .

[18]  N. Fleck,et al.  The effect of pin reinforcement upon the through-thickness compressive strength of foam-cored sandwich panels , 2003 .

[20]  V. Rizov.  Low velocity localized impact study of cellular foams , 2007 .

[21]  Ying Yan,et al.  Compression strength of stitched foam-core sandwich composites with impact induced damage , 2012 .

[22]  Cesar A. Sciammarella,et al.  Experimental Mechanics of Solids , 2012 .

[23]  Shipsha,et al.  Interfacial fatigue crack growth in foam core sandwich structures , 1999 .

[24]  R. Ogden.  Non-Linear Elastic Deformations , 1984 .

[25]  A. Shipsha,et al.  Compression strength of sandwich panels with sub-interface damage in the foam core , 2009 .

[26]  Wesley J. Cantwell,et al.  The low velocity impact response of foam-based sandwich panels , 2012 .

[27]  Jane H. Davidson,et al.  Shear buckling in foam-filled web core sandwich panels using a Pasternak foundation model , 2010 .

[28]  W. S. David,et al.  Buckling Analysis of Debonded Sandwich Panel Under Compression , 1995 .

[29]  L. Lamberti,et al.  A Comprehensive Numerical Stress—Strain Analysis of Laser Beam Butt-Welded Titanium Compared with Austenitic Steel Joints , 2010 .

[30]  S. Sanchez-Saez,et al.  Numerical modelling of foam-cored sandwich plates under high-velocity impact , 2011 .

[31]  Cesar A. Sciammarella.  Overview of optical techniques that measure displacements: Murray lecture , 2003 .

[32]  Hassan Mahfuz,et al.  Fatigue crack growth and life prediction of foam core sandwich composites under flexural loading , 2003 .

[33]  Debes Bhattacharyya,et al.  Rotational molding cycle time reduction using a combination of physical techniques , 2009 .

[34]  A. May-Pat,et al.  Mechanical properties of sandwich panels with perforated foam cores , 2011 .

[35]  R Pietrabissa,et al.  Finite element analysis of cancellous bone failure in the vertebral body of healthy and osteoporotic subjects , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[36]  Genevieve Langdon,et al.  The response of sandwich structures with composite face sheets and polymer foam cores to air-blast loading: Preliminary experiments , 2012 .

[37]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[38]  Rik Huiskes,et al.  Comparison of micro-level and continuum-level voxel models for strength predictions of the proximal femur , 2005 .

[39]  Gary A. Fleming,et al.  Measurement of rotorcraft blade deformation using projection moire interferometry , 1998, Other Conferences.

[40]  Tom Johnston,et al.  Part 1. Theory , 2014 .