A hybrid continuum robot based on pneumatic muscles with embedded elastic rods

Continuum robots have attracted increasing attention in recent years due to their intrinsic compliance and safety. Nevertheless, the use of structure compliance may lead to reduction of stiffness and positioning precision. This paper presents a novel design of a hybrid continuum robot whose actuators are composed of pneumatic muscles and embedded elastic rods. Such robot can switch drive modes between large-scale movement and fine adjustment of position by employing a locking mechanism to change its stiffness. A three-dimensional static model of the robot is presented using an improved Kirchhoff rod theory, where elastic deformation of the robot is accounted for from an optimal control point of view via minimal total potential energy principle. Experiments were carried out to validate the static model and to test the stiffness and precision of the robot. This work provides a possible way to strengthen the control precision of a continuum robot with compliant structure.

[1]  Pinhas Ben-Tzvi,et al.  Mechanics Modeling of Multisegment Rod-Driven Continuum Robots , 2014 .

[2]  Yan-an Yao,et al.  Analysis and experiments on a novel smoothly moving low-DoF multilegged robot , 2020, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[3]  Dongming Gan,et al.  Integrating laser profile sensor to an industrial robotic arm for improving quality inspection in manufacturing processes , 2020 .

[4]  Emanuel Todorov,et al.  Optimal Control Theory , 2006 .

[5]  Jozef Novak-Marcincin,et al.  Model-based Evolution of a Fast Hybrid Fuzzy Adaptive Controller for a Pneumatic Muscle Actuator , 2012 .

[6]  Kai Xu,et al.  Analytic Formulation for Kinematics, Statics, and Shape Restoration of Multibackbone Continuum Robots Via Elliptic Integrals , 2010 .

[7]  D. Floreano,et al.  Versatile Soft Grippers with Intrinsic Electroadhesion Based on Multifunctional Polymer Actuators , 2016, Advanced materials.

[8]  Paolo Dario,et al.  A SMA actuated artificial earthworm , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[9]  Tianjiang Zheng,et al.  Design, modeling and control of a pneumatically actuated manipulator inspired by biological continuum structures , 2013, Bioinspiration & biomimetics.

[10]  Kai Xu,et al.  Actuation compensation for flexible surgical snake-like robots with redundant remote actuation , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[11]  Jian S. Dai,et al.  Design of a Pneumatic Muscle Based Continuum Robot With Embedded Tendons , 2017, IEEE/ASME Transactions on Mechatronics.

[12]  Yunqing Zhang,et al.  Kinematic analysis of a PPPR spatial serial mechanism with geometric errors , 2018, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[13]  David T. Branson,et al.  Assessing worker performance using dynamic cost functions in human robot collaborative tasks , 2020 .

[14]  Arianna Menciassi,et al.  A soft multi-module manipulator with variable stiffness for minimally invasive surgery , 2017, Bioinspiration & biomimetics.

[15]  Kaspar Althoefer,et al.  Tendon-Based Stiffening for a Pneumatically Actuated Soft Manipulator , 2016, IEEE Robotics and Automation Letters.

[16]  Christopher C. Pagano,et al.  Continuum robot arms inspired by cephalopods , 2005, SPIE Defense + Commercial Sensing.

[17]  Xuanhe Zhao,et al.  Hydraulic hydrogel actuators and robots optically and sonically camouflaged in water , 2017, Nature Communications.

[18]  Atef Fahim,et al.  Analytical Modeling and Experimental Validation of the Braided Pneumatic Muscle , 2009, IEEE Transactions on Robotics.

[19]  Liang Sun,et al.  Novel approach for planetary gear train dimensional synthesis through kinematic mapping , 2020 .

[20]  B Mazzolai,et al.  An octopus-bioinspired solution to movement and manipulation for soft robots , 2011, Bioinspiration & biomimetics.

[21]  Justin Leclair,et al.  Analytical Stiffness Modeling and Experimental Validation for a Pneumatic Artificial Muscle , 2014 .

[22]  Pinhas Ben-Tzvi,et al.  Continuum Robot Dynamics Utilizing the Principle of Virtual Power , 2014, IEEE Transactions on Robotics.

[23]  Jian S. Dai,et al.  A Sarrus-like overconstrained eight-bar linkage and its associated Fulleroid-like platonic deployable mechanisms , 2018, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[24]  Jian S. Dai,et al.  Workspace Analysis of Tendon-Driven Continuum Robots Based on Mechanical Interference Identification , 2017 .

[25]  D. Caleb Rucker,et al.  Elastic Stability of Cosserat Rods and Parallel Continuum Robots , 2017, IEEE Transactions on Robotics.

[26]  Matthew A. Robertson,et al.  New soft robots really suck: Vacuum-powered systems empower diverse capabilities , 2017, Science Robotics.

[27]  S. Antman.  Nonlinear problems of elasticity , 1994 .

[28]  Yang Yang,et al.  Passive Particle Jamming and Its Stiffening of Soft Robotic Grippers , 2017, IEEE Transactions on Robotics.

[29]  J. N. Reddy,et al.  Energy principles and variational methods in applied mechanics , 2002 .

[30]  Christopher D. Rahn,et al.  Design of an artificial muscle continuum robot , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[31]  Samia Nefti-Meziani,et al.  Novel Design of a Soft Lightweight Pneumatic Continuum Robot Arm with Decoupled Variable Stiffness and Positioning , 2017, Soft robotics.

[32]  Yangmin Li,et al.  Kinematic analysis of deployable parallel mechanisms , 2020, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[33]  Polymer Actuators: Versatile Soft Grippers with Intrinsic Electroadhesion Based on Multifunctional Polymer Actuators (Adv. Mater. 2/2016) , 2016 .

[34]  Timothy Bretl,et al.  Quasi-static manipulation of a Kirchhoff elastic rod based on a geometric analysis of equilibrium configurations , 2014, Int. J. Robotics Res..

[35]  Rong Wang,et al.  Design and analysis of a hydraulic drive downhole traction in-pipe robot based on flexible support structure: , 2020 .