Effects of microchannels on the mechanical performance of multifunctional composite laminates with unidirectional laminae

Abstract The development of multifunctional composite structures enabled by embedded microvascular networks offers the potential for significant increases in functionality. The addition of active thermal management capability, self-healing, or electromagnetic configurability to a structural composite is attractive. However, the tradeoffs between mechanical performance and extended functionalities remain relatively ill-quantified. Previous studies of the effects of embedded microchannels on structural capability have considered a small number of loading conditions and layups not typically used in aerospace structures. This computational work provides comprehensive structural design guidance by quantifying the negative mechanical effects of parallel and periodic microchannels in aerospace composites, where the results are synthesized from a comprehensive set of analyses performed via rigorous implementation of widely-accepted modeling methods. The impacts of channel orientation, spacing, and channel cross-sectional aspect ratio are all quantified for laminate sequences typical of those used in aerospace structures.

[1]  Robert L. Taylor,et al.  A constitutive model for anisotropic damage in fiber-composites , 1995 .

[2]  I. Bond,et al.  Bioinspired self-healing of advanced composite structures using hollow glass fibres , 2007, Journal of The Royal Society Interface.

[3]  Ian P Bond,et al.  The Role Of Embedded Bioinspired Vasculature On Damage Formation In Self-Healing Carbon Fibre Reinforced Composites , 2011 .

[4]  Ozden O. Ochoa,et al.  Finite Element Analysis of Composite Laminates , 1992 .

[5]  A. Mouritz,et al.  The effect of self-healing hollow fibres on the mechanical properties of polymer composites , 2010 .

[6]  A. Mouritz,et al.  Stitched mendable composites: Balancing healing performance against mechanical performance , 2015 .

[7]  Ian P Bond,et al.  Interactions between propagating cracks and bioinspired self-healing vascules embedded in glass fibre reinforced composites , 2011 .

[8]  D. Jensen,et al.  Performance of graphite/bismaleimide laminates with embedded optical fibers. I. Uniaxial tension , 1992 .

[9]  Adrian C. Orifici,et al.  Structural assessment of microvascular self-healing laminates using progressive damage finite element analysis , 2012 .

[10]  I. Bond,et al.  Repeated self-healing of microvascular carbon fibre reinforced polymer composites , 2014 .

[11]  Z. Hashin,et al.  A Fatigue Failure Criterion for Fiber Reinforced Materials , 1973 .

[12]  Richard Vaia,et al.  Adaptive Composites , 2008, Science.

[13]  Scott R White,et al.  Three‐Dimensional Microvascular Fiber‐Reinforced Composites , 2011, Advanced materials.

[14]  Jinyang Zheng,et al.  Recent developments on damage modeling and finite element analysis for composite laminates: A review , 2010 .

[15]  Brandon Arritt,et al.  Biologically Inspired Multifunctional Composite Panel with Integrated Thermal Control , 2010 .

[16]  L. M. Sim,et al.  Through-the-thickness mechanical properties of smart quasi-isotropic carbon/epoxy laminates , 2004 .

[17]  R S Trask,et al.  Characterization and analysis of carbon fibre-reinforced polymer composite laminates with embedded circular vasculature , 2010, Journal of The Royal Society Interface.

[18]  E. Barbero.  Finite element analysis of composite materials , 2007 .

[19]  Rodney S. Thomson,et al.  Review of methodologies for composite material modelling incorporating failure , 2008 .

[20]  E. Barbero.  Introduction to Composite Materials Design , 1998 .

[21]  F. C. Campbell,et al.  Porosity in carbon fiber composites an overview of causes , 1995 .

[22]  Lorenzo Iannucci,et al.  Fracture toughness of the tensile and compressive fibre failure modes in laminated composites , 2006 .

[23]  P. Camanho,et al.  Prediction of size effects in notched laminates using continuum damage mechanics , 2007 .

[24]  Ramesh Talreja,et al.  Damage and Failure of Composite Materials , 2012 .

[25]  Jeffery W. Baur,et al.  Mechanical and thermal analysis of microvascular networks in structural composite panels , 2011 .

[26]  M. A. McCarthy,et al.  Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis , 2014 .

[27]  Ravi Prakash,et al.  Significance of defects in the fatigue failure of carbon fibre reinforced plastics , 1981 .

[28]  Ramesh Talreja,et al.  Effects of void geometry on elastic properties of unidirectional fiber reinforced composites , 2005 .

[29]  Chun H. Wang,et al.  Mechanical properties of mendable composites containing self-healing thermoplastic agents , 2014 .

[30]  Adrian P. Mouritz,et al.  Tensile and compressive properties of polymer laminates containing internal sensor cavities , 2008 .

[31]  E. Barbero,et al.  Benchmark Solution for Degradation of Elastic Properties due to Transverse Matrix Cracking in Laminated Composites , 2013 .

[32]  I. Bond,et al.  Biomimetic self-healing of advanced composite structures using hollow glass fibres , 2006 .

[33]  N. Sottos,et al.  Restoration of Large Damage Volumes in Polymers , 2014, Science.

[34]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .

[35]  Nancy R. Sottos,et al.  Computational design of actively-cooled microvascular composite skin panels for hypersonic aircraft , 2013 .

[36]  Scott R. White,et al.  Characterization of Active Cooling and Flow Distribution in Microvascular Polymers , 2010 .

[37]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[38]  Jeffrey S. Moore,et al.  Self-Healing Polymers and Composites , 2010 .