Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide.

The performance of carbon fiber-reinforced composites is dependent to a great extent on the properties of fiber-matrix interface. To improve the interfacial properties in carbon fiber/epoxy composites, we directly introduced graphene oxide (GO) sheets dispersed in the fiber sizing onto the surface of individual carbon fibers. The applied graphite oxide, which could be exfoliated to single-layer GO sheets, was verified by atomic force microscope (AFM). The surface topography of modified carbon fibers and the distribution of GO sheets in the interfacial region of carbon fibers were detected by scanning electron microscopy (SEM). The interfacial properties between carbon fiber and matrix were investigated by microbond test and three-point short beam shear test. The tensile properties of unidirectional (UD) composites were investigated in accordance with ASTM standards. The results of the tests reveal an improved interfacial and tensile properties in GO-modified carbon fiber composites. Furthermore, significant enhancement of interfacial shear strength (IFSS), interlaminar shear strength (ILSS), and tensile properties was achieved in the composites when only 5 wt % of GO sheets introduced in the fiber sizing. This means that an alternative method for improving the interfacial and tensile properties of carbon fiber composites by controlling the fiber-matrix interface was developed. Such multiscale reinforced composites show great potential with their improved mechanical performance to be likely applied in the aerospace and automotive industries.

[1]  Stepan Vladimirovitch Lomov,et al.  The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix , 2010 .

[2]  N. Koratkar,et al.  Enhanced mechanical properties of nanocomposites at low graphene content. , 2009, ACS nano.

[3]  N. A. Siddiqui,et al.  Tensile strength of glass fibres with carbon nanotube–epoxy nanocomposite coating , 2009 .

[4]  E. Mäder,et al.  Nanostructured coatings of glass fibers: Improvement of alkali resistance and mechanical properties , 2007 .

[5]  N. A. Siddiqui,et al.  Tensile strength of glass fibres with carbon nanotube–epoxy nanocomposite coating: Effects of CNT morphology and dispersion state , 2010 .

[6]  Chunxiang Lu,et al.  Preparation of vertically aligned carbon nanotube arrays grown onto carbon fiber fabric and evaluating its wettability on effect of composite , 2011 .

[7]  Dongmin Chen,et al.  Synthesis and Solid-State NMR Structural Characterization of 13C-Labeled Graphite Oxide , 2008, Science.

[8]  Hui Qian,et al.  Hierarchical Composites Reinforced with Carbon Nanotube Grafted Fibers: The Potential Assessed at the Single Fiber Level , 2008 .

[9]  L. Gorbatikh,et al.  Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes , 2010 .

[10]  Huafeng Yang,et al.  Convenient preparation of tunably loaded chemically converted graphene oxide/epoxy resin nanocomposites from graphene oxide sheets through two-phase extraction , 2009 .

[11]  K. Lozano,et al.  Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength , 2007 .

[12]  Chunxiang Lu,et al.  Effect of nano-SiO2 modified emulsion sizing on the interfacial adhesion of carbon fibers reinforced composites , 2007 .

[13]  V. Tsukruk,et al.  Graphene oxide--polyelectrolyte nanomembranes. , 2010, ACS nano.

[14]  Ignace Verpoest,et al.  Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites , 2009 .

[15]  N. Koratkar,et al.  Fracture and fatigue in graphene nanocomposites. , 2010, Small.

[16]  H. Schwartz,et al.  Effect of Fiber Coatings on Interlaminar Fracture Toughness of Composites , 1987 .

[17]  A. Argon,et al.  Toughenability of polymers , 2003 .

[18]  Bernard Miller,et al.  A microbond method for determination of the shear strength of a fiber/resin interface , 1987 .

[19]  Yudong Huang,et al.  Formation of a carbon fiber/polyhedral oligomeric silsesquioxane/carbon nanotube hybrid reinforcement and its effect on the interfacial properties of carbon fiber/epoxy composites , 2011 .

[20]  Chunxiang Lu,et al.  Effect of electrophoretically deposited carbon nanotubes on the interface of carbon fiber reinforced epoxy composite , 2012, Journal of Materials Science.

[21]  E. Mäder,et al.  Nanocomposite coatings for healing surface defects of glass fibers and improving interfacial adhesion , 2008 .

[22]  S. Stankovich,et al.  Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate) , 2006 .

[23]  Roland G. S. Goh,et al.  Band‐like Transport in Surface‐Functionalized Highly Solution‐Processable Graphene Nanosheets , 2008 .

[24]  Huafeng Yang,et al.  Covalent functionalization of chemically converted graphene sheets via silane and its reinforcement , 2009 .

[25]  Chunxiang Lu,et al.  Effects of emulsion sizing with nano-SiO2 on interfacial properties of carbon fibers/epoxy composites , 2007 .

[26]  S. Stankovich,et al.  Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide , 2007 .

[27]  Clifford Goodman,et al.  American Society for Testing and Materials , 1988 .

[28]  L. Drzal,et al.  Glass fiber 'sizings' and their role in fiber-matrix adhesion , 1991 .

[29]  T. Chou,et al.  Processing and characterization of multi-scale hybrid composites reinforced with nanoscale carbon reinforcements and carbon fibers , 2011 .

[30]  S. Stankovich,et al.  Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets , 2006 .

[31]  Jie Jin,et al.  Increasing the toughness of nylon 12 by the incorporation of functionalized graphene , 2010 .

[32]  Y. Mai,et al.  Failure mechanisms in toughened epoxy resins—A review , 1988 .

[33]  S. Stankovich,et al.  Graphene-based composite materials , 2006, Nature.

[34]  R. Gaertner,et al.  Physico-chemical and micromechanical analysis of the interface in a poly(phenylene sulfide)/glass fiber composite : A microbond study , 1996 .

[35]  Alejandro J. Rodriguez,et al.  Effects of electrophoretically deposited carbon nanofibers on the interface of single carbon fibers embedded in epoxy matrix , 2011 .

[36]  Klaus Kern,et al.  Elastic properties of chemically derived single graphene sheets. , 2008, Nano letters.

[37]  Long-Gui Tang,et al.  A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix , 1997 .

[38]  G. Shi,et al.  Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure , 2009 .

[39]  Alejandro J. Rodriguez,et al.  Mechanical properties of carbon nanofiber/fiber-reinforced hierarchical polymer composites manufactured with multiscale-reinforcement fabrics , 2011 .

[40]  N. Koratkar,et al.  Dramatic increase in fatigue life in hierarchical graphene composites. , 2010, ACS applied materials & interfaces.