Current Sensor with low inductance

This paper deals with design of current sensor introducing low inductance. The sensor is designed for a current up to 500 A and 120 kHz. Since the market offers several types of sensors suitable for the targeted application, they usually have problems with measured signal postprocessing. This paper describes the principle of operation and includes simulation results and measurement made on the laboratory prototype of the proposed sensor.

[1]  M.G. Wath,et al.  Error compensation method for current transformer , 2016, 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES).

[2]  J. Kaňuch,et al.  The Device to Measuring of the Load Angle for Salient-Pole Synchronous Machine in Education Laboratory , 2018 .

[3]  Eddy So,et al.  Compact Wideband High-Current ($\geq$ 1000 A) Multistage Current Transformers for Precise Measurements of Current Harmonics , 2007, IEEE Transactions on Instrumentation and Measurement.

[4]  Michal Kaczmarek.  Operation of inductive protective current transformer in condition of distorted current transformation , 2015, 2015 Modern Electric Power Systems (MEPS).

[5]  J. Smajic,et al.  Numerical Computation of Ohmic and Eddy-Current Winding Losses of Converter Transformers Including Higher Harmonics of Load Current , 2012, IEEE Transactions on Magnetics.

[6]  A. V. Bessolitsyn,et al.  Experimental study of current error of up to 50 hz current-measuring transformer , 2017, 2017 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM).

[7]  C. A. Platero,et al.  Testing of non-toroidal shape primary pass-through current transformer for electrical machine monitoring and protection , 2018, 2018 IEEE International Conference on Industrial Technology (ICIT).

[8]  M. Frivaldsky,et al.  Design and simulation of multi-element resonant LCTLC converter with HF transformer , 2014, 2014 ELEKTRO.

[9]  Marian K. Kazimierczuk,et al.  Bandwidth of Current Transformers , 2009, IEEE Transactions on Instrumentation and Measurement.

[10]  Pavol Spanik,et al.  Measurement of swtitching losses in power transistor structure , 2008 .

[11]  Michal Kaczmarek,et al.  The influence of the method of winding construction on metrological properties of current transformers designed for systems of monitoring of power quality , 2009, 2009 10th International Conference on Electrical Power Quality and Utilisation.

[12]  Petr Bernat,et al.  Adjustment of pull characteristics of lever magnet with variable reluctance , 2017, 2017 18th International Scientific Conference on Electric Power Engineering (EPE).

[13]  V. Rada,et al.  Calibration of an instrument current transformer at a ratio of 20 kA/5 A , 2012, 2012 Conference on Precision electromagnetic Measurements.

[14]  Yi Wang,et al.  Study of current transformer calibrating system based on equivalent model , 2012, IEEE 10th International Conference on Industrial Informatics.