Enzymatic fuel cells: integrating flow-through anode and air-breathing cathode into a membrane-less biofuel cell design.

One of the key goals of enzymatic biofuel cells research has been the development of a fully enzymatic biofuel cell that operates under a continuous flow-through regime. Here, we present our work on achieving this task. Two NAD(+)-dependent dehydrogenase enzymes; malate dehydrogenase (MDH) and alcohol dehydrogenase (ADH) were independently coupled with poly-methylene green (poly-MG) catalyst for biofuel cell anode fabrication. A fungal laccase that catalyzes oxygen reduction via direct electron transfer (DET) was used as an air-breathing cathode. This completes a fully enzymatic biofuel cell that operates in a flow-through mode of fuel supply polarized against an air-breathing bio-cathode. The combined, enzymatic, MDH-laccase biofuel cell operated with an open circuit voltage (OCV) of 0.584 V, whereas the ADH-laccase biofuel cell sustained an OCV of 0.618 V. Maximum volumetric power densities approaching 20 μW cm(-3) are reported, and characterization criteria that will aid in future optimization are discussed.

[1]  S. Minteer,et al.  Characterization and evaluation of hydrophobically modified chitosan scaffolds: Towards design of enzyme immobilized flow-through electrodes , 2009 .

[2]  Wei Zheng,et al.  Carbon‐Nanotube‐Based Glucose/O2 Biofuel Cells , 2006 .

[3]  D. Ivnitski,et al.  Surface characterization and direct electrochemistry of redox copper centers of bilirubin oxidase from fungi Myrothecium verrucaria. , 2008, Bioelectrochemistry.

[4]  George M. Whitesides,et al.  A methanol/dioxygen biofuel cell that uses NAD+-dependent dehydrogenases as catalysts: application of an electro-enzymatic method to regenerate nicotinamide adenine dinucleotide at low overpotentials , 1998 .

[5]  L. Gorton,et al.  Membrane‐Less Biofuel Cell Based on Cellobiose Dehydrogenase (Anode)/Laccase (Cathode) Wired via Specific Os‐Redox Polymers , 2009 .

[6]  Sergey Shleev,et al.  Direct electron transfer between copper-containing proteins and electrodes. , 2005, Biosensors & bioelectronics.

[7]  A. Heller.  Miniature biofuel cells , 2004 .

[8]  Plamen Atanasov,et al.  Enzyme‐catalyzed direct electron transfer: Fundamentals and analytical applications , 1997 .

[9]  Bor Yann Liaw,et al.  Enzyme-based biofuel cells. , 2007, Current opinion in biotechnology.

[10]  Edward I. Solomon,et al.  ELECTRONIC STRUCTURES OF ACTIVE SITES IN COPPER PROTEINS : CONTRIBUTIONS TO REACTIVITY , 1992 .

[11]  E. Rideal,et al.  Fuel Cells , 1958, Nature.

[12]  D. Ivnitski,et al.  Direct bio-electrocatalysis by multi-copper oxidases: Gas-diffusion laccase-catalyzed cathodes for biofuel cells , 2011 .

[13]  Stephen H. Brown,et al.  A study of a series of recombinant fungal laccases and bilirubin oxidase that exhibit significant differences in redox potential, substrate specificity, and stability. , 1996, Biochimica et biophysica acta.

[14]  Plamen Atanassov,et al.  Surface characterization and direct bioelectrocatalysis of multicopper oxidases , 2010 .

[15]  E. Solomon,et al.  Multicopper Oxidases and Oxygenases. , 1996, Chemical reviews.

[16]  B. Reinhammar.  Oxidation-reduction potentials of the electron acceptors in laccases and stellacyanin. , 1972, Biochimica et biophysica acta.

[17]  Adam Heller,et al.  A laccase-wiring redox hydrogel for efficient catalysis of O2 electroreduction. , 2006, The journal of physical chemistry. B.

[18]  Plamen Atanassov,et al.  Flow-through 3D biofuel cell anode for NAD + -dependent enzymes , 2011 .

[19]  S. Sant.  Nanoparticles: From Theory to Applications , 2012 .

[20]  Plamen Atanassov,et al.  Direct electron transfer catalyzed by bilirubin oxidase for air breathing gas-diffusion electrodes , 2011 .

[21]  S. Minteer,et al.  Fluorescence analysis of chemical microenvironments and their impact upon performance of immobilized enzyme. , 2010, The Analyst.

[22]  Scott Calabrese Barton,et al.  Electroreduction of O(2) to water at 0.6 V (SHE) at pH 7 on the "wired" Pleurotus ostreatus laccase cathode. , 2002, Biosensors & bioelectronics.

[23]  B. Liaw,et al.  Design of chitosan gel pore structure: towards enzyme catalyzed flow-through electrodes , 2008 .

[24]  V. Svoboda,et al.  Standardized Characterization of Electrocatalytic Electrodes , 2008 .

[25]  A Heller,et al.  The "wired" laccase cathode: high current density electroreduction of O(2) to water at +0.7 V (NHE) at pH 5. , 2001, Journal of the American Chemical Society.

[26]  D. Ivnitski,et al.  Electrochemical Studies of Intramolecular Electron Transfer in Laccase from Trametes versicolor , 2007 .

[27]  K. Piontek,et al.  Crystal Structure of a Laccase from the FungusTrametes versicolor at 1.90-Å Resolution Containing a Full Complement of Coppers* , 2002, The Journal of Biological Chemistry.

[28]  Scott Calabrese Barton,et al.  Enzymatic biofuel cells for implantable and microscale devices. , 2004, Chemical reviews.

[29]  Frank Davis,et al.  Biofuel cells--recent advances and applications. , 2007, Biosensors & bioelectronics.

[30]  Scott Calabrese Barton,et al.  Electroreduction of O2 to water on the "wired" laccase cathode , 2001 .

[31]  P. Atanassov,et al.  Conductive macroporous composite chitosan-carbon nanotube scaffolds. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[32]  S. Minteer,et al.  Development of a Chitosan Scaffold Electrode for Fuel Cell Applications , 2010 .

[33]  A Heller,et al.  A miniature biofuel cell. , 2001, Journal of the American Chemical Society.