Enhanced electrochemical performance of the counterelectrode of dye sensitized solar cells by sandblasting

Abstract Counterelectrode plays an important role in dye sensitized solar cells. It helps the regeneration of the redox couples in electrolyte and makes the cell a complete circuit. In order to improve the electrochemical performance of counterelectrode, a strategy of sandblasting has been utilized to pre-treat the surface of glass substrate. Counterelectrodes were fabricated by sputtering Pt/Ti bilayers films onto the treated substrates. Morphological, electrical, electrochemical and optical properties of the counterelectrode were characterized by scanning electronic microscopy, four-probe measurement, electrochemical impedance spectroscopy, cyclic voltammetry and UV–vis reflection spectroscopy, respectively. Effect of the treatment on these properties was evaluated. It was found that counterelectrode made from sandblasted substrates showed increased roughness of surface and sheet resistance, along with the enhanced catalysis efficiency and improved light scattering. The enhanced catalysis efficiency toward reduction of tri-iodide was found to be due to smaller Pt crystallite grown on the sandblasted substrate, since the electrochemical active surface area changed little. And scattering was caused by increased roughness of the substrate. Typical solar cells were assembled with the counterelectrode made of the sandblasted substrates. Effect of the treatment on current–voltage curves and performance parameters of the solar cells was checked and discussed.

[1]  Yong-Young Noh,et al.  Electrodeposited Pt for cost-efficient and flexible dye-sensitized solar cells , 2006 .

[2]  Guiqiang Wang,et al.  A novel high-performance counter electrode for dye-sensitized solar cells , 2005 .

[3]  Eiichi Abe,et al.  Effect of the thickness of the Pt film coated on a counter electrode on the performance of a dye-sensitized solar cell , 2004 .

[4]  Qing Wang,et al.  Characteristics of high efficiency dye-sensitized solar cells. , 2006, The journal of physical chemistry. B.

[5]  Qing Wang,et al.  Highly Efficient Dye-Sensitized Solar Cells Based on Carbon Black Counter Electrodes , 2006 .

[6]  Eiichi Abe,et al.  Properties of several types of novel counter electrodes for dye-sensitized solar cells , 2004 .

[7]  M. De Francesco,et al.  Comparison of high surface Pt/C catalysts by cyclic voltammetry , 2002 .

[8]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[9]  Mohammad Khaja Nazeeruddin,et al.  Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes , 1993 .

[10]  Liyuan Han,et al.  Improvement of efficiency of dye-sensitized solar cells by reduction of internal resistance , 2005 .

[11]  Udo Bach,et al.  Increased nanopore filling: Effect on monolithic all-solid-state dye-sensitized solar cells , 2007 .

[12]  C. Wan,et al.  Platinum/titanium bilayer deposited on polymer film as efficient counter electrodes for plastic dye-sensitized solar cells , 2007 .

[13]  N. Papageorgiou,et al.  Counter-electrode function in nanocrystalline photoelectrochemical cell configurations , 2004 .

[14]  Carl A. Koval,et al.  Electron transfer at semiconductor electrode-liquid electrolyte interfaces , 1992 .

[15]  Liyuan Han,et al.  Improvement of efficiency of dye-sensitized solar cells based on analysis of equivalent circuit , 2006 .

[16]  Jun-Ho Yum,et al.  Pt-NiO nanophase electrodes for dye-sensitized solar cells , 2006 .

[17]  W. Maier,et al.  An Iodine/Triiodide Reduction Electrocatalyst for Aqueous and Organic Media , 1997 .

[18]  Arthur J. Nozik,et al.  Physical Chemistry of Semiconductor−Liquid Interfaces , 1996 .

[19]  N. Park,et al.  On the I–V measurement of dye-sensitized solar cell: Effect of cell geometry on photovoltaic parameters , 2007 .

[20]  M. Grätzel.  Photoelectrochemical cells : Materials for clean energy , 2001 .

[21]  E. Gonzalez,et al.  Preparation and characterization of supported Pt–Ru catalysts with a high Ru content , 2006 .

[22]  Andreas Georg,et al.  Diffusion in the electrolyte and charge-transfer reaction at the platinum electrode in dye-sensitized solar cells , 2001 .

[23]  Xingzhong Zhao,et al.  Effect of thickness on structural, electrical, and optical properties of ZnO: Al films deposited by pulsed laser deposition , 2007 .

[24]  Takehito Mitate,et al.  Modeling of an equivalent circuit for dye-sensitized solar cells , 2004 .

[25]  M. Grdeń,et al.  Electrosorption of carbon dioxide on PdPt alloys , 2001 .

[26]  K. Sasaki,et al.  Stabilization of Platinum Oxygen-Reduction Electrocatalysts Using Gold Clusters , 2007, Science.

[27]  T. Ma,et al.  Performances characteristics of dye-sensitized solar cells based on counter electrodes with Pt films of different thickness , 2004 .

[28]  M. Powalla,et al.  Influence of cathode sputter deposition on organic solar cells , 2007 .

[29]  Effect of thickness on structural, electrical, and electrochemical properties of platinum/titanium bilayer counterelectrode , 2008 .