The implementation of bee colony optimization control method for interleaved converter

In this study, bee colony optimization (BCO) algorithm is adapted to the current control strategy of power factor correction for interleaved converter. The control approach is developed to eliminate the input current harmonics in the converter. BCO algorithm is a population-based new search algorithm which is one of the meta-heuristic techniques based on swarm intelligence. This algorithm simulates the natural behavior of real honey bees. In this approach, duty ratios are generated by BCO algorithm for the interleaved converter switches to obtain unity power factor (UPF) and lower total harmonic distortion of input current. The duty ratios for half a line period are calculated and stored in a look-up table. By synchronizing the memory with the line, near UPFs can be achieved in an operating point. The feed forward is also used into the control algorithm by rms value of the input voltage. The implementation of feed forward improves the converter performance. The input current of converter is operated in continuous conduction mode. The simulation and experimental results show that the proposed control strategy works well and the UPF can be achieved with a wide input voltage and load variation. The results are compatible with IEC 61000-3-2 Current Harmonic Standard.

[1]  Yungtaek Jang,et al.  Interleaved Boost Converter With Intrinsic Voltage-Doubler Characteristic for Universal-Line PFC Front End , 2007, IEEE Transactions on Power Electronics.

[2]  Jun Zhang,et al.  Flyback-Based Single-Stage Power-Factor-Correction Scheme With Time-Multiplexing Control , 2010, IEEE Transactions on Industrial Electronics.

[3]  Yao-Ching Hsieh,et al.  An Interleaved Boost Converter With Zero-Voltage Transition , 2009, IEEE Transactions on Power Electronics.

[4]  Fernando Lessa Tofoli,et al.  Power Factor Correction Boost Converter Based on the Three-State Switching Cell , 2012, IEEE Transactions on Industrial Electronics.

[5]  Hosein Farzanehfard,et al.  Bridgeless SEPIC PFC Rectifier With Reduced Components and Conduction Losses , 2011, IEEE Transactions on Industrial Electronics.

[6]  Duc Truong Pham,et al.  Using the Bees Algorithm to tune a fuzzy logic controller for a robot gymnast , 2007 .

[7]  Ires Iskender,et al.  Analysis and comparison of current control methods on bridgeless converter to improve power quality , 2013 .

[8]  Ahmet Karaarslan,et al.  The Implementation of Bee Colony Optimization Algorithm to Sheppard–Taylor PFC Converter , 2013, IEEE Transactions on Industrial Electronics.

[9]  Bin Wu,et al.  A digital power factor correction (PFC) control strategy optimized for DSP , 2004 .

[10]  Marco A. Dalla Costa,et al.  Integrated Buck-Flyback Converter as a High-Power-Factor Off-Line Power Supply , 2008, IEEE Transactions on Industrial Electronics.

[11]  Craig A. Tovey,et al.  On Honey Bees and Dynamic Server Allocation in Internet Hosting Centers , 2004, Adapt. Behav..

[12]  Ahmet Karaarslan The analysis of average sliding control method applied on Sheppard–Taylor power factor correction converter , 2013 .

[13]  I. Iskender,et al.  Pure sinusoidal input voltage based bridgeless PFC converter using TMS320F2812 digital signal processor , 2009, 2009 International Conference on Electrical and Electronics Engineering - ELECO 2009.

[14]  Gang Yao,et al.  Soft Switching Circuit for Interleaved Boost Converters , 2007, IEEE Transactions on Power Electronics.

[15]  Ahmet Karaarslan,et al.  DSP Microprocessor Based-On Power Factor Correction to Improve Power Quality of Converters Using Predictive Control , 2011 .

[16]  Dervis Karaboga,et al.  AN IDEA BASED ON HONEY BEE SWARM FOR NUMERICAL OPTIMIZATION , 2005 .

[17]  Simone Buso,et al.  Simple digital control improving dynamic performance of power factor preregulators , 1997 .

[18]  Ires Iskender,et al.  A DSP based power factor correction converter to reduce total harmonic distortion of input current for improvement of power quality , 2011 .