The morphodynamic modelling of tidal sand waves on the shoreface

An artificial sand wave on the Dutch shoreface of the North Sea has been studied in conditions with relatively strong tidal currents in the range of 0.5 to 1 m/s and sediments in the medium sand size range of 0.2 to 0.5 mm. The sand wave is perpendicular to the tidal current and has a maximum height and length of the order of 5 m and 1 km, respectively. The sand wave is dynamically active and shows migration rates of the order of a few metres per year. A numerical morphodynamic model (DELFT3D model) has been used to simulate the morphological behaviour of the sand wave in the North Sea. This model approach is based on the numerical solution of the three-dimensional shallow water equations in combination with a surface wave propagation model (wind waves) and the advection–diffusion equation for the sediment particles with online bed updating after each time step. The model results show that the sand wave grows in the case of dominant bed-load transport (weak tidal currents; relatively coarse sediment; small roughness height; low waves) and that the sand wave decays in the case of dominant suspended transport (strong currents, relatively fine sediment, large roughness height; storm waves).

[1]  Suzanne J.M.H. Hulscher,et al.  Tidal‐induced large‐scale regular bed form patterns in a three‐dimensional shallow water model , 1996 .

[2]  R. Bagnold,et al.  The flow of cohesionless grains in fluids , 1956, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[3]  S. Hulscher,et al.  Modelling sand wave migration in shallow shelf seas , 2002 .

[4]  L. Rijn.  Sediment Transport, Part II: Suspended Load Transport , 1984 .

[5]  T. Hoitink.  Morphological impact of large scale marine sand extraction , 1997 .

[6]  G. Besio,et al.  A note on tidally generated sand waves , 2003, Journal of Fluid Mechanics.

[7]  G. Stelling,et al.  Development and validation of a three-dimensional morphological model , 2004 .

[8]  Leo C. van Rijn,et al.  Unified View of Sediment Transport by Currents and Waves. II: Suspended Transport , 2007 .

[9]  Syunsuke Ikeda,et al.  Lateral Bed Load Transport on Side Slopes , 1982 .

[10]  Maarten G. Kleinhans,et al.  Processes controlling the dynamics of compound sand waves in the North Sea, Netherlands , 2005 .

[11]  John M. Huthnance,et al.  On one mechanism forming linear sand banks , 1982 .

[12]  Pieter C. Roos,et al.  Seabed pattern dynamics and offshore sand extraction , 2004 .

[13]  L. Rijn.  Principles of sediment transport in rivers, estuaries and coastal seas , 1993 .

[14]  P. Roos,et al.  The cross-sectional shape of tidal sandbanks: modeling and observations , 2004 .

[15]  D.J.R. Walstra,et al.  Description of TRANSPOR2004 and implementation in Delft3D-ONLINE: Interim report , 2004 .

[16]  Van Rijn,et al.  Sediment transport; Part I, Bed load transport , 1984 .

[17]  Keri C. Hornbuckle,et al.  Magnitude and origin of polychlorinated biphenyl (PCB) and dichlorodiphenyltrichloroethane (DDT) compounds resuspended in southern Lake Michigan , 2004 .

[18]  Graeme M. Smart,et al.  Sediment Transport Formula for Steep Channels , 1984 .

[19]  R. Galappatti,et al.  A depth integrated model for suspended transport , 1983 .

[20]  Huib J. de Vriend,et al.  The generation of offshore tidal sand banks and sand waves , 1993 .

[21]  L. Rijn.  Sediment transport and budget of the central coastal zone of Holland , 1997 .

[22]  J. W. H. van de Meene,et al.  The shoreface-connected ridges along the central Dutch coast , 2000 .

[23]  M. Brocchini,et al.  On the modeling of sand wave migration , 2004 .