An electrostatic induction micromotor supported on gas-lubricated bearings

This paper reports the first successful fabrication and demonstration of an electrostatic induction micromotor supported on gas-lubricated bearings for electrical-to-mechanical energy conversion. The device consists of a stack of five (5) deep reactive ion etched (DRIE) fusion bonded silicon wafers, with an enclosed 4.2 mm diameter rotor driven by a high-voltage, high-frequency thin-film stator. Testing has demonstrated a torque of 0.3 /spl mu/Nm at a rotation rate of 15,000 revolutions per minute, corresponding to a shaft power of 0.5 mW. This development effort serves to support the creation of a wide array of power MEMS devices such as micro-scale pumps, compressors, generators, and coolers.

[1]  Stephen F. Bart,et al.  An analysis of electroquasistatic induction micromotors , 1989 .

[2]  J. H. Lang,et al.  Operation of microfabricated harmonic and ordinary side-drive motors , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[3]  T. Christenson,et al.  A first functional current excited planar rotational magnetic micromotor , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[4]  Jeffrey H. Lang,et al.  MICRO-HEAT ENGINES, GAS TURBINES, AND ROCKET ENGINES -THE MIT MICROENGINE PROJECT- , 1997 .

[5]  K. Breuer,et al.  Fabrication and characterization of a micro turbine/bearing rig , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[6]  R. Ghodssi,et al.  THICK BURIED OXIDE IN SILICON ( TBOS ) : AN INTEGRATED FABRICATION TECHNOLOGY FOR MULTI-STACK WAFER-BONDED MEMS PROCESSES , 1999 .

[7]  M. Schmidt,et al.  Microfabrication of high-temperature silicon devices using wafer bonding and deep reactive ion etching , 1999 .

[8]  Luc G. Fréchette,et al.  Development of a microfabricated silicon motor-driven compression system , 2000 .

[9]  Steven F. Nagle.  Analysis, design, and fabrication of an electric induction micromotor for a micro gas-turbine generator , 2000 .

[10]  Xin Zhang,et al.  Demonstration of a Microfabricated High-Speed Turbine Supported on Gas Bearings , 2000 .