Recycling of dual hazardous wastes in a catalytic fluidizing process

Abstract A mixture of post-consumer polyethylene/polypropylene/polystyrene (PE/PP/PS) with polyvinyl-chloride (PVC) waste was pyrolyzed over cracking catalysts using a fluidizing reaction system in an FCC process operating isothermally at ambient pressure. The influences of catalyst types and reaction conditions including reaction temperatures, ratios of catalyst to plastic feed, flow rates of fluidizing gas and catalyst particle sizes were examined. A model based on kinetic and mechanistic considerations associated with chemical reactions and catalyst deactivation in the acid-catalyzed degradation of plastics has been developed. The results of this study are useful for determining the effects of catalyst types and reaction conditions on both the product distribution and selectivity from commingled plastic waste, and especially for the utilization of post-use commercial FCC recycled catalysts for producing valuable hydrocarbons in a fluidizing cracking process. Moreover, the use of this recycled/modified FCC spent catalyst (RCat-s1) together with an optimal reaction system can be an adequate option since it may lead to a cheaper process with valuable products and can also be further used as a dual recycling of chlorine-containing hazardous waste plastics and a post-use commercial catalyst waste from FCC refinery.

[1]  S. Ali,et al.  Polymer waste recycling over used catalysts , 2002 .

[2]  G. Manos,et al.  Thermogravimetric study of polymer catalytic degradation over microporous materials , 2004 .

[3]  Y. Lin,et al.  Chemical catalysed recycling of polypropylene over a spent FCC catalyst and various commercial cracking catalysts using TGA , 2008 .

[4]  A. Garforth,et al.  Conversion of Polyethylene into Gasoline-Range Fuels by Two-Stage Catalytic Degradation Using Silica−Alumina and HZSM-5 Zeolite , 1999 .

[5]  M. Yang,et al.  Catalytic pyrolysis of polyolefin waste into valuable hydrocarbons over reused catalyst from refinery FCC units , 2007 .

[6]  Paul N. Sharratt,et al.  Investigation of the Catalytic Pyrolysis of High-Density Polyethylene over a HZSM-5 Catalyst in a Laboratory Fluidized-Bed Reactor , 1997 .

[7]  Zhiming Gao,et al.  A kinetic study of thermal degradation of polypropylene , 2003 .

[8]  K. Miura,et al.  Catalytic pyrolysis of γ-irradiated polypropylene (PP) over HY-zeolite for enhancing the reactivity and the product selectivity , 2002 .

[9]  Y.-H. Lin,et al.  Catalytic reactions of post-consumer polymer waste over fluidised cracking catalysts for producing hydrocarbons , 2005 .

[10]  Dae-Hyun Shin,et al.  Liquid-phase catalytic degradation of mixtures of waste high-density polyethylene and polystyrene over spent FCC catalyst. Effect of mixing proportions of reactants , 2004 .

[11]  Ulises Sedran,et al.  Conversion of waste plastics into fuels: Recycling polyethylene in FCC , 2002 .

[12]  A. Corma,et al.  Tertiary recycling of polypropylene by catalytic cracking in a semibatch stirred reactor , 2000 .

[13]  A. Marcilla,et al.  Catalytic pyrolysis of LDPE over H-beta and HZSM-5 zeolites in dynamic conditions: Study of the evolution of the process , 2007 .

[14]  D. Serrano,et al.  Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review , 2008 .

[15]  M. Yang,et al.  Tertiary recycling of polyethylene waste by fluidised-bed reactions in the presence of various cracking catalysts , 2008 .

[16]  J. Brandrup,et al.  Recycling and Recovery of Plastics , 1996 .

[17]  W. Hall,et al.  FeZSM-5: A Durable SCR Catalyst for NOxRemoval from Combustion Streams , 1997 .