Effect of micron size Ni particle addition in Sn–8Zn–3Bi lead-free solder alloy on the microstructure, thermal and mechanical properties

Abstract Micron-sized Ni particle-reinforced Sn–8Zn–3Bi composite solders were prepared by mechanically dispersing Ni particles into Sn–8Zn–3Bi alloy and the bulk properties of the composite solder alloy were characterized metallographically, thermally and mechanically. Different percentage of Ni particle viz. 0.25, 0.5 and 1 wt.% were added in the liquid Sn–8Zn–3Bi alloy and then cast into the metal molds. Melting behavior was studied by differential thermal analyzer (DTA). Microstructural investigation was carried out by both optical and scanning electron microscope. Tensile properties were determined using an Instron Universal Testing Machine at a strain rate 3.00 mm/min. The results indicated that the Ni addition increased the melting temperature of Sn–8Zn–3Bi alloy. The addition of Ni was also found to increase the solidification range. In the Sn–8Zn–3Bi alloy, needle-shaped α-Zn phase was found to be uniformly distributed in the β-Sn matrix. However, it was found that the small amount of Ni addition in Sn–8Zn–3Bi alloy refined the Zn needles throughout the matrix. Also an enhanced precipitation of Zn in the structure was observed with the addition of Ni. All these structural changes improved the mechanical properties like tensile strength and hardness of the newly developed quaternary alloy.

[1]  Masahiro Yamaguchi,et al.  Interfacial reaction of gas-atomized Sn–Zn solder containing Ni and Cu additives , 2009 .

[2]  Pei Yao,et al.  Effects of multiple reflows on intermetallic morphology and shear strength of SnAgCu–xNi composite solder joints on electrolytic Ni/Au metallized substrate , 2008 .

[3]  H. Baker,et al.  Alloy phase diagrams , 1992 .

[4]  Katsuaki Suganuma,et al.  Effect of composition and cooling rate on microstructure and tensile properties of Sn–Zn–Bi alloys , 2003 .

[5]  Y. C. Chan,et al.  Influence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy , 2010, Microelectron. Reliab..

[6]  K. N. Subramanian,et al.  Effects of intermetallic morphology at the metallic particle/solder interface on mechanical properties of Sn-Ag-based solder joints , 2003 .

[7]  Zbigniew Moser,et al.  The Sn−Zn (Tin-Zinc) system , 1985 .

[8]  C.E. Ho,et al.  Effects of Pd concentration on the interfacial reaction and mechanical reliability of the Sn–Pd/Ni system , 2011 .

[9]  Fu Guo,et al.  Processing and aging characteristics of eutectic Sn-3.5Ag solder reinforced with mechanically incorporated Ni particles , 2001 .

[10]  Y. Chan,et al.  Effect of nano Ni additions on the structure and properties of Sn-9Zn and Sn-8Sn-3Bi solder in ball grid array packages , 2008, 2008 2nd Electronics System-Integration Technology Conference.

[11]  Cai-Fu Li,et al.  The effects of temperature and humidity on the growth of tin whisker and hillock from Sn5Nd alloy , 2013 .

[12]  F. Guo.  Composite lead-free electronic solders , 2006 .

[13]  Y. Lei,et al.  Retarding the electromigration effects to the eutectic SnBi solder joints by micro-sized Ni-particles reinforcement approach , 2011 .

[14]  T. Chin,et al.  Pb-free solder-alloy based on Sn–Zn–Bi with the addition of germanium , 2010 .

[15]  K. N. Subramanian,et al.  Creep behaviour of composite lead‐free electronic solder joints , 2003 .

[16]  John Hald,et al.  Development of gold based solder candidates for flip chip assembly , 2009, Microelectron. Reliab..

[17]  T. Chuang,et al.  Effect of La addition on the interfacial intermetallics and bonding strengths of Sn–58Bi solder joints with Au/Ni/Cu pads , 2010 .

[18]  Kwang-Lung Lin,et al.  Wetting interaction of Pb-free Sn-Zn-Al solders on metal plated substrate , 1998 .

[19]  J. Duh,et al.  Lead-free Sn-Ag and Sn-Ag-Bi solder powders prepared by mechanical alloying , 2003 .

[20]  M. Hansen,et al.  Constitution of Binary Alloys , 1958 .

[21]  Meng Zhang,et al.  On the advantages of using a hypoeutectic Sn–Zn as lead-free solder material , 2007 .

[22]  Haitao Ma,et al.  Effect of a Trace of Bi and Ni on the Microstructure and Wetting Properties of Sn-Zn-Cu Lead-Free Solder , 2009 .

[23]  Wislei R. Osório,et al.  Microstructure and mechanical properties of Sn–Bi, Sn–Ag and Sn–Zn lead-free solder alloys , 2013 .

[24]  Fu Guo,et al.  Evaluation of creep behavior of near-eutectic Sn–Ag solders containing small amount of alloy additions , 2003 .

[25]  A. M. Abdraboh,et al.  Thermal and mechanical properties of Sn―Zn―Bi lead-free solder alloys , 2009 .

[26]  C. Liao,et al.  Effect of antimony on vigorous interfacial reaction of Sn–Sb/Te couples , 2011 .

[27]  Min-Hsiung Hon,et al.  Phase transformation and morphology of the intermetallic compounds formed at the Sn–9Zn–3.5Ag/Cu interface in aging , 2008 .

[28]  H. C. Lin,et al.  Reliability of Sn-Ag-Sb lead-free solder joints , 2005 .

[29]  U. Kattner.  Phase diagrams for lead-free solder alloys , 2002 .

[30]  Y. C. Chan,et al.  Investigation of small Sn–3.5Ag–0.5Cu additions on the microstructure and properties of Sn–8Zn–3Bi solder on Au/Ni/Cu pads , 2010 .

[31]  Sungho Jin,et al.  New, lead-free solders , 1994 .

[32]  Kwang-Lung Lin,et al.  Interfacial bonding behavior with introduction of Sn–Zn–Bi paste to Sn–Ag–Cu ball grid array package during multiple reflows , 2005 .

[33]  Bo-In Noh,et al.  Effects of cerium content on wettability, microstructure and mechanical properties of Sn–Ag–Ce solder alloys , 2010 .

[34]  Weiqun Peng,et al.  An investigation of Sn pest in pure Sn and Sn-based solders , 2009, Microelectron. Reliab..

[35]  W. J. Plumbridge,et al.  Creep properties of Sn-8Mass%Zn-3Mass%Bi lead-free alloy , 2004 .

[36]  Tadashi Ariga,et al.  Wettability and strength of In–Bi–Sn lead-free solder alloy on copper substrate , 2010 .