Comprehensive Investigation of Non-Equilibrium Properties of Foamy Oil Induced by Different Types of Gases

[1]  F. Zeng,et al.  Experimental and numerical studies on non-equilibrium gaseous solvent dissolution in heavy oil: A continuum-scale approach based on bubble-scale dissolution behaviors , 2022, Fuel.

[2]  Xiaofei Sun,et al.  A novel model for determination of apparent diffusion coefficient of gaseous solvent mixture-heavy oil system with consideration of swelling effect and density variation , 2021, Fluid Phase Equilibria.

[3]  J. Leung,et al.  Numerical Simulation of Nonequilibrium Foamy Oil for Cyclic Solvent Injection in Reservoirs after Cold Heavy Oil Production with Sand , 2021 .

[4]  F. Zeng,et al.  Experimental and numerical studies of non-equilibrium solvent exsolution behavior and foamy oil stability under quiescent and convective conditions in a visualized porous media , 2021 .

[5]  Shijun Huang,et al.  A semi-analytical model for predicting inflow profile of long horizontal wells in super-heavy foamy oil reservoir , 2020 .

[6]  Zhiheng Hu,et al.  New insight into CO2 huff-n-puff process for extraheavy oil recovery via viscosity reducer agents: An experimental study , 2020 .

[7]  J. Leung,et al.  Analysis of non-equilibrium foamy oil flow in cyclic solvent injection processes , 2020 .

[8]  Xiaofei Sun,et al.  Phase behavior of heavy oil–solvent mixture systems under reservoir conditions , 2020, Petroleum Science.

[9]  Jinjie Wang,et al.  Experimental and mathematical modeling studies on foamy oil stability using a heavy oil–CO2 system under reservoir conditions , 2020 .

[10]  Jianwei Feng,et al.  Determining CO2 diffusion coefficient in heavy oil in bulk phase and in porous media using experimental and mathematical modeling methods , 2020 .

[11]  Zhangxin Chen,et al.  Field-Scale Modeling of Hybrid Steam and In-Situ-Combustion Recovery Process in Oil-Sands Reservoirs Using Dynamic Gridding , 2020, SPE Reservoir Evaluation and Engineering.

[12]  T. Babadagli,et al.  Use of Air with Methane in Cyclic Solvent Injection Applications for Improved Foam Stability and Cost Effective Heavy Oil Recovery , 2020 .

[13]  R. G. Moore,et al.  A novel method (CCE&C) to study transient phase behaviour in heavy oil and ethane , 2019 .

[14]  Yongan Gu,et al.  An Analytical Production Model for Primary Production and Cyclic Solvent Injection in a Heavy-Oil Reservoir , 2019, SPE Journal.

[15]  Zhangxin Chen,et al.  Numerical investigation of the mechanisms in co-injection of steam and enriched air process using combustion tube tests , 2019, Fuel.

[16]  F. Torabi,et al.  Effects of Wormhole Configurations on Performance of Cyclic Solvent Injection in Heavy Oil Systems , 2018, Natural Resources Research.

[17]  T. Babadagli,et al.  Optimization of methane use in cyclic solvent injection for heavy-oil recovery after primary production through experimental and numerical studies , 2018 .

[18]  Zhihua Cui,et al.  Bat algorithm with triangle-flipping strategy for numerical optimization , 2017, International Journal of Machine Learning and Cybernetics.

[19]  Meysam Naderi,et al.  Application of DOE and metaheuristic bat algorithm for well placement and individual well controls optimization , 2017 .

[20]  X. Li,et al.  A new mathematical model and experimental validation on foamy-oil flow in developing heavy oil reservoirs , 2017, Scientific Reports.

[21]  Xiaofei Sun,et al.  Study on equilibrium and non-equilibrium PVT behavior of foamy oil using experiments and PVT correlations , 2017 .

[22]  T. Babadagli,et al.  Relative Permeability of Foamy Oil for Different Types of Dissolved Gases , 2016 .

[23]  Fanhua Zeng,et al.  Foamy oil flow in heavy oil–solvent systems tested by pressure depletion in a sandpack , 2016 .

[24]  Meysam Naderi,et al.  Drilling rate of penetration prediction and optimization using response surface methodology and bat algorithm , 2016 .

[25]  Xiaoli Li,et al.  Nonequilibrium Phase Behavior of Alkane Solvent(s)–CO2–Heavy Oil Systems under Reservoir Conditions , 2016 .

[26]  Mingzhe Dong,et al.  Enhanced heavy oil recovery in thin reservoirs using foamy oil-assisted methane huff-n-puff method , 2015 .

[27]  Zhangxin Chen,et al.  A pseudo-bubble point model and its simulation for foamy oil in porous media , 2015 .

[28]  Shangqi Liu,et al.  Performances of Different Recovery Methods for Orinoco Belt Heavy Oil after Solution Gas Drive , 2013 .

[29]  Sixu Zheng,et al.  Enhanced Swelling Effect and Viscosity Reduction of Solvent(s)/CO2/Heavy-Oil Systems , 2013 .

[30]  Apostolos Kantzas,et al.  Novel Techniques for Measuring Heavy-Oil Fluid Properties , 2007 .

[31]  R. Wong,et al.  Gas bubble growth in heavy oil-filled sand packs under undrained unloading , 2007 .

[32]  R. Wong,et al.  Estimation of Bubble Size in Heavy Oil Solution Drive Based on Kinetics of Gas Exsolution , 2005 .

[33]  A. Kovscek,et al.  A Mechanistic Modeling and Experimental Study of Solution Gas Drive , 2003 .

[34]  D. B. Bennion,et al.  A Case Study of Foamy Oil Recovery in the Patos-Marinza Reservoir, Driza Sand, Albania , 2003 .

[35]  D. Joseph,et al.  A New Modeling Approach for Heavy Oil Flow in Porous Media , 2001 .

[36]  R. E. Hayes,et al.  Critical Review of Foamy Oil Flow , 1999 .

[37]  A. Firoozabadi,et al.  Pressure and Volume Evolution During Gas Phase Formation in Solution Gas Drive Process (includes associated papers 38340 and 38565 ) , 1996 .

[38]  D. Peng,et al.  A New Two-Constant Equation of State , 1976 .

[39]  Daoyong Yang,et al.  Quantification of gas exsolution and preferential diffusion for alkane solvent(s)–CO2–heavy oil systems under nonequilibrium conditions , 2022 .