A Computational Investigation of Stepped-Bowl Piston Geometry for a Light Duty Engine Operating at Low Load

[1]  Yu Shi,et al.  Optimization of a HSDI Diesel Engine for Passenger Cars Using a Multi-Objective Genetic Algorithm and Multi-Dimensional Modeling , 2009 .

[2]  Russell P. Durrett,et al.  Multiple-Event Fuel Injection Investigations in a Highly-Dilute Diesel Low Temperature Combustion Regime , 2009 .

[3]  R. Reitz,et al.  A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels , 2008 .

[4]  Rolf D. Reitz,et al.  A Computational Investigation of Two-Stage Combustion in a Light-Duty Engine , 2008 .

[5]  Rolf D. Reitz,et al.  An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations , 2008 .

[6]  Rolf D. Reitz,et al.  Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-Duty Diesel Engine Operated at High-Load , 2008 .

[7]  G. Neely,et al.  Investigation of Alternative Combustion Crossing Stoichiometric Air Fuel Ratio for Clean Diesels , 2007 .

[8]  R. M. Siewert,et al.  Spray Angle and Rail Pressure Study for Low NOx Diesel Combustion , 2007 .

[9]  Rolf D. Reitz,et al.  Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine , 2007 .

[10]  Rolf D. Reitz,et al.  A computational investigation into the effects of spray targeting, bowl geometry and swirl ratio f , 2007 .

[11]  Hao Helen Zhang,et al.  Component selection and smoothing in multivariate nonparametric regression , 2006, math/0702659.

[12]  Kazuhiro Saitou,et al.  Optimal Subassembly Partitioning of Space Frame Structures for In-Process Dimensional Adjustability and Stiffness , 2006 .

[13]  Rolf D. Reitz,et al.  The Use of Non-Parametric Regression to Investigate the Sensitivities of High-Speed Direct Injection Diesel Emissions and Fuel Consumption to Engine Parameters , 2006 .

[14]  R. Reitz,et al.  Optimizing HSDI Diesel Combustion and Emissions Using Multiple Injection Strategies , 2005 .

[15]  Tomoyuki Hiroyasu,et al.  Reduction of Heavy Duty Diesel Engine Emission and Fuel Economy with Multi-Objective Genetic Algorithm and Phenomenological Model , 2004 .

[16]  Arturo de Risi,et al.  Optimization of the Combustion Chamber of Direct Injection Diesel Engines , 2003 .

[17]  Rolf D. Reitz,et al.  Split-Spray Piston Geometry Optimized for HSDI Diesel Engine Combustion , 2003 .

[18]  Yiqiang Pei,et al.  A Compound Technology for HCCI Combustion in a DI Diesel Engine Based on the Multi-Pulse Injection and the BUMP Combustion Chamber , 2003 .

[19]  P. Senecal,et al.  Simultaneous reduction of engine emissions and fuel consumption using genetic algorithms and multi-dimensional spray and combustion modeling , 2000 .

[20]  Peter J. O'Rourke,et al.  A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model , 2000 .

[21]  R. Reitz,et al.  Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission , 1998 .

[22]  A. A. Amsden,et al.  A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines , 1996 .

[23]  Rolf D. Reitz,et al.  Assessment of Multi-Objective Genetic Algorithms With Different Niching Strategies and Regression Methods for Engine Optimization and Design , 2009 .

[24]  Rolf D. Reitz,et al.  Reduction of Numerical Parameter Dependencies in Diesel Spray Models , 2007 .

[25]  Song-Charng Kong,et al.  Modeling diesel spray flame lift-off, sooting tendency and NOx emissions using detailed chemistry , 2005 .

[26]  Kalyanmoy Deb,et al.  Multi-objective optimization using evolutionary algorithms , 2001, Wiley-Interscience series in systems and optimization.

[27]  R. Reitz,et al.  MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .

[28]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .