L-mode filament characteristics on MAST as a function of plasma current measured using visible imaging

Clear filamentary structures are observed at the edge of tokamak plasmas. These filaments are ejected out radially and carry plasma in the far scrape off layer (SOL) region, where they are responsible for producing most of the transport. A study has been performed of the characteristics of the filaments observed in L-mode plasma on MAST, using visible imaging. A comparison has then been made with the observed particle and power profiles obtained at the divertor as a function of the plasma current. The radial velocity and to a lesser extent the radial size of the filaments are found to decrease as the plasma current is increased at constant density and input power. The results obtained in this paper on the dependence of the average filament dynamics on plasma current are consistent with the idea that the filaments are responsible for determining the particle profiles at the divertor.

[1]  V. Rohde,et al.  Radial transport in the far scrape-off layer of ASDEX Upgrade during L-mode and ELMy H-mode , 2013 .

[2]  J. Contributors,et al.  Scaling of the tokamak near the scrape-off layer H-mode power width and implications for ITER , 2013 .

[3]  U. Stroth,et al.  Influence of temperature fluctuations on plasma turbulence investigations with Langmuir probes , 2011, 1111.4091.

[4]  H. Wilson,et al.  Experiments and simulation of edge turbulence and filaments in MAST , 2008 .

[5]  J. Contributors,et al.  Outer target heat fluxes and power decay length scaling in L-mode plasmas at JET and AUG , 2013 .

[6]  J. Contributors,et al.  Implications of high density operation on SOL transport: a multimachine investigation , 2015 .

[7]  F. Wagner.  A study of the perpendicular particle transport properties in the scrape-off layer of ASDEX , 1985 .

[8]  B. Lipschultz,et al.  Investigation of the origin of neutrals in the main chamber of Alcator C-Mod , 2002 .

[9]  A. Kirk,et al.  The effect of L mode filaments on divertor heat flux profiles as measured by infrared thermography on MAST , 2015 .

[10]  V. Naulin,et al.  Three dimensional simulations of plasma filaments in the scrape off layer: A comparison with models of reduced dimensionality , 2014, 1410.2137.

[11]  Grantham K. H. Pang,et al.  Camera calibration from road lane markings , 2003 .

[12]  A. Kirk,et al.  Scaling of the scrape-off layer width during inter-ELM H modes on MAST as measured by infrared thermography , 2014, 1406.2898.

[13]  R. E. Bell,et al.  Edge and SOL turbulence and blob variations over a large database in NSTX , 2015 .

[14]  W. Fundamenski,et al.  Radial interchange motions of plasma filaments , 2006 .

[15]  M. Porkolab,et al.  Transport phenomena in the edge of Alcator C-Mod plasmas , 2005 .

[16]  L. Lao,et al.  Reconstruction of current profile parameters and plasma shapes in tokamaks , 1985 .

[17]  Y. Feng,et al.  EMC3-Eirene simulations of particle- and energy fluxes to main chamber- and divertor plasma facing components in ASDEX Upgrade compared to experiments , 2015 .

[18]  B. Leblanc,et al.  Structure and motion of edge turbulence in the National Spherical Torus Experiment and Alcator C-Moda) , 2006 .

[19]  W. Fundamenski,et al.  Fluctuations and transport in the TCV scrape-off layer , 2007 .

[20]  T. Evans,et al.  TRANSPORT BY INTERMITTENCY IN THE BOUNDARY OF THE DIII-D TOKAMAK , 2002 .

[21]  M. Greenwald,et al.  Particle transport in the scrape-off layer and its relationship to discharge density limit in Alcator C-Mod , 2001 .

[22]  Y. Liu,et al.  Statistical characterization of blob turbulence across the separatrix in HL-2A tokamak , 2010 .

[23]  S. Zweben,et al.  Edge turbulence measurements in toroidal fusion devices , 2007 .

[24]  A. Fasoli,et al.  Cross-field motion of plasma blobs in an open magnetic field line configuration. , 2009, Physical review letters.

[25]  Brian Labombard,et al.  Analysis of a multi-machine database on divertor heat fluxesa) , 2011 .

[26]  John R. Terry,et al.  Plasma–surface interaction, scrape-off layer and divertor physics: implications for ITER , 2007 .

[27]  T. Eich,et al.  Inter-ELM power decay length for JET and ASDEX upgrade: measurement and comparison with heuristic drift-based model. , 2011, Physical review letters.

[28]  James Myra,et al.  Collisionality and magnetic geometry effects on tokamak edge turbulent transport. I. A two-region model with application to blobs , 2006 .

[29]  W. Fundamenski,et al.  Simulations of edge and scrape off layer turbulence in mega ampere spherical tokamak plasmas , 2012 .

[30]  S. Saarelma,et al.  Evolution of the pedestal on MAST and the implications for ELM power loadings , 2007 .

[31]  V. Lynch,et al.  Structure and properties of the electrostatic fluctuations in the far scrape-off layer region of Alcator C-Mod , 2001 .

[32]  James Myra,et al.  Convective transport by intermittent blob-filaments: Comparison of theory and experiment , 2011 .

[33]  O. E. Garcia.  Blob Transport in the Plasma Edge: a Review , 2009 .

[34]  A. Kirk,et al.  Thermographic study of heat load asymmetries during MAST L-mode discharges , 2010 .

[35]  Ben Dudson,et al.  Inter-ELM filaments and turbulent transport in the Mega-Amp Spherical Tokamak , 2009 .

[36]  T. Eich,et al.  Change of the scrape-off layer power width with the toroidal B-field direction in ASDEX upgrade , 2015 .

[37]  U. Stroth,et al.  Filament velocity scaling laws for warm ions , 2013 .

[38]  G. Fishpool,et al.  Numerical investigation of isolated filament motion in a realistic tokamak geometry , 2015, 1508.03976.

[39]  T. Eich,et al.  Filament structures at the plasma edge on MAST , 2006 .

[40]  Sergei Krasheninnikov,et al.  On scrape off layer plasma transport , 2001 .

[41]  V. Soukhanovskii,et al.  Dependence of SOL widths on plasma current and density in NSTX H-mode plasmas , 2009 .

[42]  J. Contributors,et al.  Experimental Validation of a Filament Transport Model in Turbulent Magnetized Plasmas. , 2015, Physical review letters.

[43]  G. Birkenmeier,et al.  The influence of plasma edge dynamics on blob properties in the stellarator TJ-K , 2013 .