A non-linear dynamic model for planetary gear sets

Abstract A discrete non-linear torsional vibration model of a single-stage planetary set is proposed in the current study. The model includes all possible power flow configurations, any number of planets in any spacing arrangement and any planet mesh phasing configurations. It also includes time variation of gear mesh stiffnesses as well as clearance (backlash) non-linearities. The non-linear equations of motion are solved semi-analytically using multi-term harmonic balance method (HBM) in conjunction with inverse discrete Fourier transform and Newton-Rapson method. The HBM solutions are compared with numerical simulation results to demonstrate the accuracy of the HBM formulation. Another comparison with predictions of a deformable-body dynamic model is also provided to assess the accuracy of the discrete model. Limited parametric studies are presented at the end, to show the influence of key gear design parameters on dynamic response.

[1]  Ahmet Kahraman,et al.  Planetary gear train dynamics , 1994 .

[2]  D. L. Seager.  Load Sharing Among Planet Gears , 1970 .

[3]  Ahmet Kahraman,et al.  INTERACTIONS BETWEEN COMMENSURATE PARAMETRIC AND FORCING EXCITATIONS IN A SYSTEM WITH CLEARANCE , 1996 .

[4]  Ahmet Kahraman,et al.  Load sharing characteristics of planetary transmissions , 1994 .

[5]  Ahmet Kahraman,et al.  Free torsional vibration characteristics of compound planetary gear sets , 2001 .

[6]  Ahmet Kahraman,et al.  Dynamic tooth loads of planetary gear sets having tooth profile wear , 2004 .

[7]  Tao Sun,et al.  Nonlinear dynamics of a planetary gear system with multiple clearances , 2003 .

[8]  J. D. Smith,et al.  Dynamic Tooth Loads in Epicyclic Gears , 1974 .

[9]  W. E. Palmer,et al.  Noise Control In Planetary Transmissions , 1977 .

[10]  A. Al-shyyaba,et al.  Non-linear dynamic analysis of a multi-mesh gear train using multi-term harmonic balance method : period-one motions , 2005 .

[11]  Ahmet Kahraman,et al.  Non-linear dynamic analysis of a multi-mesh gear train using multi-term harmonic balance method: sub-harmonic motions , 2005 .

[12]  D. L. Seager.  Conditions for the Neutralization of Excitation by the Teeth in Epicyclic Gearing , 1975 .

[13]  A. Kahraman,et al.  Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity , 1995 .

[14]  H. Rahnejat,et al.  Vibration response of wavy surfaced disc in elastohydrodynamic rolling contact , 1990 .

[15]  M. Botman,et al.  Epicyclic Gear Vibrations , 1975 .