Partial modification of flow-through porous electrodes in microfluidic fuel cell

The use of flow-through porous electrodes is identified as a promising approach to enhance the performance of microfluidic fuel cell (MFC). In this study, a dimensionless computational model is developed to analyze the distribution characteristics of the electrochemical reactions in flow-through porous electrodes of MFC. One important finding is that the electrochemical reactions mainly occur in the vicinity of the anode and cathode outlets. Based on this observation, the new design of partial modification at reactive sites is proposed to reduce the MFC cost. It is found that MFC with partial modification can achieve comparable performance with that of conventional full electrode modification, demonstrating the feasibility of partial modification method. The partial modification also offers a promising alternative to avoid unwanted secondary reaction, such as hydrogen evolution.

[1]  R. Menéndez,et al.  Enhanced performance of a Bi-modified graphite felt as the positive electrode of a vanadium redox flow battery , 2011 .

[2]  Jin Wook Lee,et al.  Chip-embedded thin film current collector for microfluidic fuel cells , 2012 .

[3]  Dongjiang You,et al.  A simple model for the vanadium redox battery , 2009 .

[4]  C. P. Léon,et al.  Determination of the effective thickness of a porous electrode in a flow-through reactor: effect of the specific surface area of stainless steel fibres, used as a porous cathode, during the deposition of Ag(I) ions , 2008 .

[5]  Gao Yan,et al.  A coupled three dimensional model of vanadium redox flow battery for flow field designs , 2014 .

[6]  Erik Kjeang,et al.  Computational modeling of microfluidic fuel cells with flow-through porous electrodes , 2011 .

[7]  Taeeun Yim,et al.  A new strategy for integrating abundant oxygen functional groups into carbon felt electrode for vanadium redox flow batteries , 2014, Scientific Reports.

[8]  Xiaoxin Wu,et al.  PbO2-modified graphite felt as the positive electrode for an all-vanadium redox flow battery , 2014 .

[9]  K. Hsueh,et al.  A Kinetic Study of the Platinum/Carbon Anode Catalyst for Vanadium Redox Flow Battery , 2013 .

[10]  Keith Scott,et al.  A current distribution model of a porous fuel cell electrode , 2004 .

[11]  Jun Shen,et al.  Architecture for portable direct liquid fuel cells , 2006 .

[12]  Iftekhar A. Karimi,et al.  Modeling and Experimental Validation of Electrochemical Reduction of CO2 to CO in a Microfluidic Cell , 2015 .

[13]  Maria Skyllas-Kazacos,et al.  Chemical modification of graphite electrode materials for vanadium redox flow battery application—part II. Acid treatments , 1992 .

[14]  F. Coeuret,et al.  Potential distribution in flow-through porous electrodes under limiting current conditions , 1977 .

[15]  Erik Kjeang,et al.  Microfluidic fuel cell systems , 2011 .

[16]  J. Raoof,et al.  Comparison between graphene supported Pt hollow nanospheres and graphene supported Pt solid nanoparticles for hydrogen evolution reaction , 2014 .

[17]  K. Kakaei,et al.  Palladium nanoparticle catalysts synthesis on graphene in sodium dodecyl sulfate for oxygen reduction reaction , 2014 .

[18]  Ali Almansoori,et al.  Optimization of catalyst preparation conditions for direct sodium borohydride fuel cell using response surface methodology , 2014 .

[19]  R. Sioda.  Distribution of potential in a porous electrode under conditions of flow electrolysis , 1971 .

[20]  M. Skyllas-Kazacos,et al.  Review of material research and development for vanadium redox flow battery applications , 2013 .

[21]  Maria Skyllas-Kazacos,et al.  Modification of graphite electrode materials for vanadium redox flow battery application—I. Thermal treatment , 1992 .

[22]  C. Flox,et al.  Strategies for enhancing electrochemical activity of carbon-based electrodes for all-vanadium redox flow batteries , 2013 .

[23]  David Sinton,et al.  Microfluidic fuel cells: A review , 2009 .

[24]  B. Sabacky,et al.  Electrodeposition of Metals in Fluidized Bed Electrodes Part I . Mathematical Model , 1979 .

[25]  Huamin Zhang,et al.  Carbon paper coated with supported tungsten trioxide as novel electrode for all-vanadium flow battery , 2012 .

[26]  Jae Hyuk Jang,et al.  Micro-fuel cells—Current development and applications , 2007 .

[27]  P. Sui,et al.  Modification of Carbon Paper Electrode via Hydrothermal Oxidation Applied in the Vanadium Redox Battery , 2012 .

[28]  Jeffrey D. Morse,et al.  Micro‐fuel cell power sources , 2007 .

[29]  N. Syarif.  Performance of Biocarbon based Electrodes for Electrochemical Capacitor , 2014 .

[30]  Suqin Liu,et al.  Influence of Fenton's reagent treatment on electrochemical properties of graphite felt for all vanadium redox flow battery , 2013 .

[31]  Tiezhu Zhang,et al.  Nitrogen-doped graphene for supercapacitor with long-term electrochemical stability , 2014 .

[32]  Soo-Jin Park,et al.  Influence of H2O2 treatment on electrochemical activity of mesoporous carbon-supported Pt–Ru catalysts , 2014 .

[33]  Xindong Wang,et al.  Investigation of Ir-modified carbon felt as the positive electrode of an all-vanadium redox flow battery , 2007 .

[34]  Zeng-min Shen,et al.  Carbon fiber paper for fuel cell electrode , 2002 .

[35]  Jae‐Hun Kim,et al.  The effects of surface modification on carbon felt electrodes for use in vanadium redox flow batteries , 2011 .

[36]  Jun Ki Hong,et al.  Electrochemical characteristics of vanadium redox reactions on porous carbon electrodes for microfluidic fuel cell applications , 2012 .

[37]  J. Newman,et al.  Electrochemical removal of copper ions from very dilute solutions , 1972 .

[38]  Xin-dong Wang,et al.  Study of the electrochemical properties of a transition metallic ions modified electrode in acidic VOSO4 solution , 2007 .

[39]  Hyungsun Kim.  Electrochemical Properties of Graphite-based Electrodes for Redox Flow Batteries , 2011 .

[40]  Iftekhar A. Karimi,et al.  Erratum: Modeling and Experimental Validation of Electrochemical Reduction of CO2 to CO in a Microfluidic Cell [J. Electrochem. Soc., 162, F23 (2015)] , 2014 .

[41]  E. Roberts,et al.  An improved model of potential and current distribution within a flow-through porous electrode , 1996 .

[42]  David Sinton,et al.  A microfluidic fuel cell with flow-through porous electrodes. , 2008, Journal of the American Chemical Society.

[43]  J. Shyu,et al.  Characterization of bubble formation in microfluidic fuel cells employing hydrogen peroxide , 2011 .

[44]  J. Bisang,et al.  Potential and current distribution in porous electrodes under charge-transfer kinetic control , 1994 .

[45]  Nigel P. Brandon,et al.  Application of carbon materials in redox flow batteries , 2014 .

[46]  C. Flox,et al.  Thermo–chemical treatments based on NH3/O2 for improved graphite-based fiber electrodes in vanadium redox flow batteries , 2013 .