Wake of a cylinder: a paradigm for energy harvesting with piezoelectric materials

Short-length piezoelectric beams were placed in the wake of a circular cylinder at high Reynolds numbers to evaluate their performance as energy generators. The coherent vortical structures present in this flow generate a periodic forcing on the beam which when tuned to its resonant frequency produces maximum output voltage. There are two mechanisms that contribute to the driving forcing of the beam. The first mechanism is the impingement of induced flow by the passing vortices on one side of the beam, and the second is the low pressure core region of the vortices which is present at the opposite side of the beam. The sequence of these two mechanisms combined with the resonating conditions of the beam generated maximum energy output which was also found to vary with the location in the wake. The maximum power output was measured when the tip of the beam is about two diameters downstream of the cylinder. This power drops off the center line of the wake and decays with downstream distance as (x/D)−3/2.

[1]  G. Karniadakis,et al.  A combined direct numerical simulation–particle image velocimetry study of the turbulent near wake , 2006, Journal of Fluid Mechanics.

[2]  Jeff D. Eldredge,et al.  Passive locomotion of a simple articulated fish-like system in the wake of an obstacle , 2008, Journal of Fluid Mechanics.

[3]  Jaywant H. Arakeri,et al.  Flow over a cylinder with a hinged-splitter plate , 2009 .

[4]  Lan N. Nguyen,et al.  Absolute instability in the near-wake of two-dimensional bluff bodies , 1987 .

[5]  Charles H. K. Williamson,et al.  The instability of the separated shear layer from a bluff body , 1996 .

[6]  M. Bloor,et al.  The transition to turbulence in the wake of a circular cylinder , 1964, Journal of Fluid Mechanics.

[7]  Donald Rockwell,et al.  Instantaneous Structure of the Near-Wake of a Circular Cylinder: on the Effect of Reynolds Number , 1995 .

[8]  Kyung-Soo Yang,et al.  Drag reduction on a circular cylinder using dual detached splitter plates , 2007 .

[9]  R. A. Antonia,et al.  Flow around a circular cylinder—structure of the near wake shear layer , 2005 .

[10]  N. Elvin,et al.  Energy Harvesting from Highly Unsteady Fluid Flows using Piezoelectric Materials , 2010 .

[11]  Charles H. K. Williamson,et al.  Three-dimensional effects in turbulent bluff-body wakes , 1997, Journal of Fluid Mechanics.

[12]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[13]  William P. Robbins,et al.  Wind-Generated Electrical Energy Using Flexible Piezoelectric Mateials , 2006 .

[14]  D. Inman,et al.  A Review of Power Harvesting from Vibration using Piezoelectric Materials , 2004 .

[15]  Alex Elvin,et al.  Feasibility of structural monitoring with vibration powered sensors , 2006 .

[16]  Joseph A. Paradiso,et al.  Energy scavenging for mobile and wireless electronics , 2005, IEEE Pervasive Computing.

[17]  Norbert Schwesinger,et al.  A Novel Hydropower Harvesting Device , 2004 .

[18]  Y. Andreopoulos,et al.  An experimental study of the dissipative and vortical motion in turbulent boundary layers , 2001, Journal of Fluid Mechanics.

[19]  D. Rockwell,et al.  On vortex formation from a cylinder. Part 2. Control by splitter-plate interference , 1988, Journal of Fluid Mechanics.

[20]  Daniel J. Inman,et al.  A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters , 2008 .

[21]  Alex Elvin,et al.  A Coupled Finite Element—Circuit Simulation Model for Analyzing Piezoelectric Energy Generators , 2009 .

[22]  S. Mittal,et al.  International Journal for Numerical Methods in Fluids Control of Vortex Shedding behind Circular Cylinder for Flows at Low Reynolds Numbers , 2022 .

[23]  Daniel J. Inman,et al.  Generation and Storage of Electricity from Power Harvesting Devices , 2005 .

[24]  N. Elvin,et al.  A General Equivalent Circuit Model for Piezoelectric Generators , 2009 .

[25]  J. Andreopoulos,et al.  Wall-vorticity flux dynamics in a two-dimensional turbulent boundary layer , 1996, Journal of Fluid Mechanics.

[26]  Timothy C. Green,et al.  Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices , 2008, Proceedings of the IEEE.

[27]  G. Lauder,et al.  Passive propulsion in vortex wakes , 2006, Journal of Fluid Mechanics.

[28]  H. Saunders.  Literature Review : RANDOM DATA: ANALYSIS AND MEASUREMENT PROCEDURES J. S. Bendat and A.G. Piersol Wiley-Interscience, New York, N. Y. (1971) , 1974 .

[29]  V. Schmidt.  Piezoelectric energy conversion in windmills , 1992, IEEE 1992 Ultrasonics Symposium Proceedings.

[30]  A. Prasad,et al.  The instability of the shear layer separating from a bluff body , 1997, Journal of Fluid Mechanics.

[31]  Martin Brede.  Measurement of turbulence production in the cylinder separated shear-layer using event-triggered Laser-Doppler anemometry , 2004 .

[32]  C. Williamson.  Vortex Dynamics in the Cylinder Wake , 1996 .

[33]  R. So,et al.  Flow-induced vibration of elastic slender structures in a cylinder wake , 2004 .

[34]  A. Roshko.  On the development of turbulent wakes from vortex streets , 1953 .

[35]  Joseph R. Burns,et al.  The Energy Harvesting Eel: a small subsurface ocean/river power generator , 2001 .