Improved manipulation efficiency using a serial-type dual actuator unit

Service robots are often required to be able to perform both the position control and force control for various tasks. In addition, service robots should cope with collision safety to prevent possible damage to humans and environments during unintended collision. To this end, several redundant actuation systems have been proposed. In this research, the dual actuator unit (DAU) was developed to improve the manipulation efficiency by maximizing the velocity or payload depending on various situations. The DAU is composed of two actuators connected in series through a planetary gear train and a cam-based clutch system. In this paper, the characteristics of the DAU having three operating modes - dual actuation mode, high speed mode and high torque mode - are discussed. Various experiments show that the DAU can carry out the given task flexibly and it can improve the manipulation efficiency.

[1]  John Kenneth Salisbury,et al.  A New Actuation Approach for Human Friendly Robot Design , 2004, Int. J. Robotics Res..

[2]  Antonio Bicchi,et al.  Design and Control of a Variable Stiffness Actuator for Safe and Fast Physical Human/Robot Interaction , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[3]  Shinsuk Park,et al.  Equilibrium Point Control of a Robot Arm with a Double Actuator Joint , 2004 .

[4]  Jae-Bok Song,et al.  Double Actuator Unit based on the Planetary Gear Train Capable of Position/Force Control , 2006 .

[5]  Jerry E. Pratt,et al.  Virtual model control of a bipedal walking robot , 1997, Proceedings of International Conference on Robotics and Automation.

[6]  Bram Vanderborght,et al.  MACCEPA: the Actuator with Adaptable Compliance for Dynamic Walking Bipeds , 2005, CLAWAR.

[7]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.