A 1.2-V CMOS front-end for LTE direct conversion SAW-less receiver

A CMOS RF front-end for the Long-Term Evolution (LTE) direct conversion receiver is presented in this paper. With low noise transconductance amplifier (TCA), current commutating passive mixer and transimpedance operational amplifier (TIA), the RF front-end structure enables high-integration, high linearity and simple frequency planning for LTE multi-band applications. Large variable gain is achieved using current-steering transconductance stages. A current commutating passive mixer with 25% duty-cycle LO improves gain, noise and linearity. Direct coupled current-input filter (DCF) is employed to suppress the out-of-band interferer. Fabricated in a 0.13-μm CMOS process, the RF front-end achieves 45dB conversion voltage gain, 2.7dB N F, −7dBm IIP3, and +60dBm IIP2 with calibration from 2.3GHz to 2.7GHz. The total RF front end with divider draws 40mA from a single 1.2-V supply.

[1]  Ali M. Niknejad,et al.  A 1.5-V 0.7-2.5-GHz CMOS Quadrature Demodulator for Multiband Direct-Conversion Receivers , 2007, IEEE J. Solid State Circuits.

[2]  P. Sivonen,et al.  A 1.2-V RF front-end with on-chip VCO for PCS 1900 direct conversion receiver in 0.13-/spl mu/m CMOS , 2006, IEEE Journal of Solid-State Circuits.

[3]  S.S. Taylor,et al.  A Broadband Low-Cost Direct-Conversion Receiver Front-End in 90 nm CMOS , 2008, IEEE Journal of Solid-State Circuits.

[4]  Namsoo Kim,et al.  A Highly Linear SAW-Less CMOS Receiver Using a Mixer With Embedded Tx Filtering for CDMA , 2009, IEEE J. Solid State Circuits.

[5]  Lu Han,et al.  A Single–Chip 10-Band WCDMA/HSDPA 4-Band GSM/EDGE SAW-less CMOS Receiver With DigRF 3G Interface and ${+}$90 dBm IIP2 , 2009, IEEE Journal of Solid-State Circuits.

[6]  Tser-Yu Lin,et al.  A 0.13 $\mu$ m CMOS Quad-Band GSM/GPRS/EDGE RF Transceiver Using a Low-Noise Fractional-N Frequency Synthesizer and Direct-Conversion Architecture , 2009, IEEE Journal of Solid-State Circuits.

[7]  M.-C.F. Chang,et al.  A CMOS passive mixer with low flicker noise for low-power direct-conversion receiver , 2005, IEEE Journal of Solid-State Circuits.

[8]  Mohammed Ismail,et al.  WiMAX/LTE receiver front-end in 90nm CMOS , 2009, 2009 IEEE International Symposium on Circuits and Systems.

[9]  Byeong-Ha Park,et al.  A 0.13-µm CMOS multi-band WCDMA/HSDPA receiver adopting silicon area reducing techniques , 2009, 2009 IEEE Radio Frequency Integrated Circuits Symposium.

[10]  Thomas H. Lee,et al.  The Design of CMOS Radio-Frequency Integrated Circuits: RF CIRCUITS THROUGH THE AGES , 2003 .