A Preliminary Study of the Effect of Surface Texture on Algae Cell Attachment for a Mechanical-Biological Energy Manufacturing System

A grand vision of an algal biofuel energy manufacturing system is presented here. The proposed system, from manufacturing engineering and system points of view, aims to provide technical solutions to two major challenges that the algal biofuel industry faces, i.e., low productivity and energy intensive harvesting and drying, which result in prohibitively high costs. The proposed idea is to have an integrated "conveyor belt" system floating on the water surface powered by windmills or a hybrid energy source. The conveyor belt is made of corrosion-resistant steel sheets that have microdimple surface features to significantly enhance the attachment of algae cells to the "belt" compared with a surface without microdimple features. The grown algae on the belt will then be mechanically scraped off, collected, dried, and squeezed for oil extraction. This paper addresses one of many fundamental problems in this vision, i.e., whether algae can grow effectively on textured stainless steel surfaces. Through both static and dynamic tests, it was found that the growth of algae on textured surfaces was several times more active than that on a flat sample.

[1]  Johannes Lyklema,et al.  Hydrophobic and electrostatic parameters in bacterial adhesion , 1990, Aquatic Sciences.

[2]  Carlos Jiménez,et al.  The Feasibility of industrial production of Spirulina (Arthrospira) in Southern Spain , 2003 .

[3]  Hyoung‐Chin Kim,et al.  Harvesting of Chlorella vulgaris using a bioflocculant from Paenibacillus sp. AM49 , 2001, Biotechnology Letters.

[4]  W. Oswald,et al.  Biological transformation of solar energy. , 1960, Advances in applied microbiology.

[5]  Laboratory studies on adhesion of microalgae to hard substrates , 2004 .

[6]  J. Xia,et al.  Modeling the growth curve for Spirulina (Arthrospira) maxima, a versatile microalga for producing uniformly labelled compounds with stable isotopes , 2001, Journal of Applied Phycology.

[7]  Pascal Jaouen,et al.  Comparison of two membrane – photobioreactors, with free or immobilized cells, for the production of pigments by a marine diatom , 2000 .

[8]  M. Li,et al.  Experimental and numerical investigation of forming limits in incremental forming of a conical cup , 2008 .

[9]  H. B. Gotaas,et al.  Anaerobic digestion of Algae. , 1957, Applied microbiology.

[10]  E. Molina Grima,et al.  Challenges in microalgae biofuels , 2009 .

[11]  W. Yuan,et al.  Culture of Microalga Botryococcus in Livestock Wastewater , 2008 .

[12]  W. Oswald,et al.  Biological conversion of light energy to the chemical energy of methane. , 1959, Applied microbiology.

[13]  James Finlay,et al.  Roughness-dependent Removal of Settled Spores of the Green Alga Ulva (syn. Enteromorpha) Exposed to Hydrodynamic Forces from a Water Jet , 2004, Biofouling.

[14]  G. López,et al.  The Influence of Surface Wettability on the Adhesion Strength of Settled Spores of the Green Alga Enteromorpha and the Diatom Amphora1 , 2002, Integrative and comparative biology.

[15]  Maureen E. Callow,et al.  Microtopographic Cues for Settlement of Zoospores of the Green Fouling Alga Enteromorpha , 2002 .

[16]  L. Johnson.  Enhanced settlement on microtopographical high points by the intertidal red alga Halosaccion glandiforme , 1994 .

[17]  R. Divakaran,et al.  Flocculation of algae using chitosan , 2002, Journal of Applied Phycology.

[18]  Y. Chisti.  Biodiesel from microalgae. , 2007, Biotechnology advances.