Determination of critical operating and geometrical parameters in diesel injectors through one dimensional modelling, design of experiments and an analysis of variance
暂无分享,去创建一个
F. J. Salvador | Francisco J Salvador | Marcos Carreres | Marco Crialesi-Esposito | Alejandro H Plazas | M. Crialesi-Esposito | M. Carreres | A. H. Plazas
[1] Arthur H. Lefebvre,et al. GEOMETRICAL EFFECTS ON DISCHARGE COEFFICIENTS FOR PLAIN-ORIFICE ATOMIZERS , 1991 .
[2] B. Pourdeyhimi,et al. Simulating Cavitation and Hydraulic Flip Inside Hydroentangling Nozzles , 2004 .
[3] F. J. Salvador,et al. Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles , 2015 .
[4] F. J. Salvador,et al. Comparative analysis of a DI diesel engine fuelled with biodiesel blends during the European MVEG-A cycle: Preliminary study (I) , 2009 .
[5] Gian Marco Bianchi,et al. Advanced Modeling of Common Rail Injector Dynamics and Comparison with Experiments , 2003 .
[6] T A Fox,et al. Discharge Coefficients for Miniature Fuel Injectors , 1989 .
[7] F. J. Salvador,et al. Numerical simulation and extended validation of two-phase compressible flow in diesel injector nozzles , 2011 .
[8] C. Arcoumanis,et al. Cavitation Modelling in Single-Hole Diesel Injector Based on Eulerian-Lagrangian Approach , 2004 .
[9] Raul Payri,et al. Using one-dimensional modeling to analyse the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Detailed injection system model , 2012 .
[10] F. J. Salvador,et al. Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part I: Experimental mass flow rate measurements and discussion , 2016 .
[11] Olivier Simonin,et al. MULTIDIMENSIONAL SIMULATION OF CAVITATING FLOWS IN DIESEL INJECTORS BY A HOMOGENEOUS MIXTURE MODELING APPROACH , 2008 .
[12] L. N. Harris,et al. Taguchi techniques for quality engineering, Philip J. Ross, Mcgraw-hill book company, 1988 , 1989 .
[13] F. J. Salvador,et al. A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles , 2014 .
[14] Raul Payri,et al. Influence of injector technology on injection and combustion development – Part 2: Combustion analysis , 2011 .
[15] E. Markland,et al. Discharge Coefficients for Incompressible Non-Cavitating Flow through Long Orifices , 1965 .
[16] Raul Payri,et al. Diesel Injection System Modelling. Methodology and Application for a First-generation Common Rail System , 2004 .
[17] Federico Brusiani,et al. Advanced Modelling of a New Diesel Fast Solenoid Injector and Comparison with Experiments , 2004 .
[18] J. C. Kent,et al. Nozzle Exit Flow Characteristics for Square-edged and Rounded Inlet Geometries , 1983 .
[19] Raul Payri,et al. Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis , 2016 .
[20] F. J. Salvador,et al. Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics , 2015 .
[21] J. Arregle,et al. Computational Model for Simulation of Diesel Injection Systems , 1999 .
[22] F. J. Salvador,et al. Computational study of the cavitation phenomenon and its interaction with the turbulence developed in diesel injector nozzles by Large Eddy Simulation (LES) , 2013, Math. Comput. Model..
[23] Bernardo Tormos,et al. Using one-dimensional modelling codes to analyse the influence of diesel nozzle geometry on injection rate characteristics , 2005 .
[24] W. H. Nurick,et al. Orifice Cavitation and Its Effect on Spray Mixing , 1976 .
[25] F. J. Salvador,et al. Validation of a code for modeling cavitation phenomena in Diesel injector nozzles , 2010, Math. Comput. Model..
[26] Federico Brusiani,et al. Numerical Investigation of Critical Issues in Multiple-Injection Strategy Operated by a New C.R. Fast-Actuation Solenoid Injector , 2005 .
[27] F. Obermeier,et al. EXPERIMENTAL STUDY OF CAVITATION IN THE NOZZLE HOLE OF DIESEL INJECTORS USING TRANSPARENT NOZZLES , 1995 .
[28] Jose J. Lopez,et al. Study of mass and momentum transfer in diesel sprays based on X-ray mass distribution measurements and on a theoretical derivation , 2011 .
[29] F. J. Salvador,et al. Complete modelling of a piezo actuator last-generation injector for diesel injection systems , 2014 .
[30] F. J. Salvador,et al. A comprehensive study on the effect of cavitation on injection velocity in diesel nozzles , 2012 .
[31] F. J. Salvador,et al. STUDY OF THE INFLUENCE OF THE NEEDLE LIFT ON THE INTERNAL FLOW AND CAVITATION PHENOMENON IN DIESEL INJECTOR NOZZLES BY CFD USING RANS METHODS , 2013 .
[32] Raul Payri,et al. A contribution to the understanding of cavitation effects in Diesel injector nozzles through a combined experimental and computational investigation , 2012 .
[33] F. J. Salvador,et al. Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Results of the simulations and discussion , 2012 .
[34] Celia Soteriou,et al. Further studies of cavitation and atomization in diesel injection , 1999 .
[35] A. F ICARELLA,et al. INJECTION CHARACTERISTICS SIMULATION AND ANALYSIS IN DIESEL ENGINES* , 2022 .