Removal of a model protein foulant from metal surfaces

Using precoated whey protein concentrate gel films as a model milk protein fouling material, the removal kinetics from the inner surface of a stainless steel tube were determined continuously and noninvasively by a rapid UV spectrophotometric method. The influences of temperature, flow velocity, and the amount of fouling on the cleaning behavior were evaluated. For the first time, a cleaning model combining polymer dissolution and boundary layer mass transfer has been used to describe the cleaning process. It is suggested that the disengagement of protein molecules from the swollen gel–solution interface and the transfer of these disengaged protein molecules into the bulk cleaning solution are the rate-limiting steps in the range of conditions examined. The experimental results agree with the predictions of the cleaning model. The application of the current cleaning model to milk protein and whey protein fouling systems reported by various researchers is also discussed. 2004 American Institute of Chemical Engineers AIChE J, 50:1961–1973, 2004

[1]  Necati Özkan,et al.  Whey protein-based gel as a model material for studying initial cleaning mechanisms of milk fouling , 2002 .

[2]  W. Jennings.  Theory and practice of hard-surface cleaning. , 1965, Advances in food research.

[3]  William W. Graessley.  The Entanglement Concept in Polymer Rheology , 1974 .

[4]  A. Parker,et al.  Dissolution Kinetics of Polymer Powders , 2000 .

[5]  F. René,et al.  Fouling by Milk and Dairy Product and Cleaning of Heat Exchange Surfaces , 1988 .

[6]  Ferdinand Rodriguez,et al.  Dissolution rates of poly(methyl methacrylate) films in mixed solvents , 1986 .

[7]  J. Tissier,et al.  Fouling of Heat Transfer Surfaces Related to β‐Lactoglobulin Denaturation During Heat Processing of Milk , 1985, Biotechnology progress.

[8]  G. Corrieu,et al.  AN OPTICAL METHOD TO STUDY THE KINETICS OF CLEANING MILK DEPOSITS BY SODIUM HYDROXIDE , 1982 .

[9]  R. A. Mashelkar,et al.  The life time of a dissolving polymeric particle , 1994 .

[10]  Nikolaos A. Peppas,et al.  Mathematical modeling and experimental characterization of polymer dissolution , 1994 .

[11]  A. C. Ouano,et al.  Model for the kinematics of polymer dissolution , 1977 .

[12]  B. Narasimhan,et al.  Mathematical models describing polymer dissolution: consequences for drug delivery. , 2001, Advanced drug delivery reviews.

[13]  K. Nakanishi,et al.  Comparative Study on Caustic and Enzymatic Cleanings of Stainless Steel Surface Fouled with β-Lactoglobulin , 1995 .

[14]  D. W. Brinkman,et al.  The cleaning of heat exchangers and evaporators after processing milk or whey , 1994 .

[15]  D. Hess,et al.  Transport models for swelling and dissolution of thin polymer films , 1989 .

[16]  V. Ranade,et al.  Convective diffusion from a dissolving polymeric particle , 1995 .

[17]  T. Tuladhar,et al.  Development of a novel sensor for cleaning studies , 2001 .

[18]  P. R. Rajamohanan,et al.  Unusual retardation and enhancement in polymer dissolution: Role of disengagement dynamics☆ , 1995 .

[19]  P. Harriott,et al.  Solid-liquid mass transfer in turbulent pipe flow , 1965 .

[20]  D. Wilson,et al.  Cleaning-in-Place of Whey Protein Fouling Deposits: Mechanisms Controlling Cleaning , 1999 .

[21]  R. Carbonell,et al.  Removal of organic films from solid surfaces using aqueous solutions of nonionic surfactants. 1. Experiments , 1995 .