Vanadium Oxide Thin Films Alloyed with Ti, Zr, Nb, and Mo for Uncooled Infrared Imaging Applications

Microbolometer-grade vanadium oxide (VOx) thin films with 1.3 < x < 2.0 were prepared by pulsed direct-current (DC) sputtering using substrate bias in a controlled oxygen and argon environment. These films were systematically alloyed with Ti, Nb, Mo, and Zr using a second gun and radiofrequency (RF) reactive co-sputtering to probe the effects of the transition metals on the film charge transport characteristics. The results reveal that the temperature coefficient of resistance (TCR) and resistivity are unexpectedly similar for alloyed and unalloyed films up to alloy compositions in the ∼20 at.% range. Analysis of the film structures for the case of the 17% Nb-alloyed film by glancing-angle x-ray diffraction and transmission electron microscopy shows that the microstructure remains even with the addition of high concentrations of alloy metal, demonstrating the robust character of the VOx films to maintain favorable electrical transport properties for bolometer applications. Postdeposition thermal annealing of the alloyed VOx films further reveals improvement of electrical properties compared with unalloyed films, indicating a direction for further improvements in the materials.

[1]  Hyun-Joon Shin,et al.  Characterization of uncooled bolometer with vanadium tungsten oxide infrared active layer , 2005 .

[2]  Paul W. Kruse,et al.  Uncooled Thermal Imaging Arrays, Systems, and Applications , 2001 .

[3]  Mark W. Horn,et al.  Vanadium oxide thin films for bolometric applications deposited by reactive pulsed dc sputtering , 2009 .

[4]  Mark W. Horn,et al.  Ion implantation studies on VOx films prepared by pulsed dc reactive sputtering , 2009 .

[5]  Elizabeth C. Dickey,et al.  Microtwinning in highly nonstoichiometric VOx thin films , 2010 .

[6]  Jing Li,et al.  Comparison of ion beam and magnetron sputtered vanadium oxide thin films for uncooled IR imaging , 2011, Defense + Commercial Sensing.

[7]  Mark W. Horn,et al.  Process-structure-property correlations in pulsed dc reactive magnetron sputtered vanadium oxide thin films , 2011 .

[8]  Mark W. Horn,et al.  Electrical properties of vanadium oxide thin films for bolometer applications: processed by pulse dc sputtering , 2009 .

[9]  Elizabeth C. Dickey,et al.  Enhanced electrical and noise properties of nanocomposite vanadium oxide thin films by reactive pulsed-dc magnetron sputtering , 2012 .

[10]  Hyun-Joon Shin,et al.  Fabrication and characterization of bolometric oxide thin film based on vanadium-tungsten alloy , 2005 .

[12]  Mark W. Horn,et al.  Correlation of temperature response and structure of annealed VOx thin films for IR detector applications , 2009 .

[13]  Jing Li,et al.  Microstructure of vanadium oxide used in microbolometers , 2011, Defense + Commercial Sensing.

[14]  Sergei Baranovski,et al.  Charge transport in disordered solids with applications in electronics , 2006 .

[15]  Thomas N. Jackson,et al.  Low temperature charge carrier hopping transport mechanism in vanadium oxide thin films grown using pulsed dc sputtering , 2009 .

[16]  A. Rogalski.  Infrared detectors: status and trends , 2003 .

[17]  Elizabeth C. Dickey,et al.  Stoichiometry and microstructural effects on electrical conduction in pulsed dc sputtered vanadium oxide thin films , 2009 .