Wireless tactile sensing element using stress-sensitive resonator

Robots that work with humans require a soft sensor skin to cover the entire body. In this paper, we propose a new method to realize such a skin. By implanting wireless sensing elements in an elastic body, we obtain an elastic and tough sensor skin which is able to be shaped freely. The element is a passive resonator chip whose resonant frequency reflects the stress around the chip. The resonant frequency is read out by a ground coil located at the bottom of the skin. The chip is simply composed of three functional parts: a coil for receiving and transmitting electrical power with wireless coupling, capacitance sensitive to stress, and ceramic resonator to provide high-Q resonance. The high quality factor brought by the ceramic resonator enables one to distinguish a large number of chips, and to sense the stress with high accuracy. The structure, the method of wireless signal detection, and basic experiments of tactile sensing are presented.

[1]  M. Shimojo,et al.  A system for simultaneously measuring grasping posture and pressure distribution , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[2]  Donald C. Malocha,et al.  Remote sensor system using passive SAW sensors , 1994, 1994 Proceedings of IEEE Ultrasonics Symposium.

[3]  Katsuhiko Nakamura,et al.  Telemetric Artificial Skin for Soft Robot , 1999 .

[4]  Yoji Yamada,et al.  A tactile sensor system for universal joint sections of manipulators , 1993, IEEE Trans. Robotics Autom..

[5]  Alfred Pohl,et al.  New passive sensors , 1999, IMTC/99. Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (Cat. No.99CH36309).

[6]  Takashi Maeno,et al.  Analysis and design of a tactile sensor detecting strain distribution inside an elastic finger , 1998, Proceedings. 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications (Cat. No.98CH36190).

[7]  Masayuki Inaba,et al.  A full-body tactile sensor suit using electrically conductive fabric and strings , 1996, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS '96.

[8]  Hiroyuki Shinoda,et al.  Telemetric robot skin , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[9]  R. Normann,et al.  A study of printed spiral coils for neuroprosthetic transcranial telemetry applications , 1998, IEEE Transactions on Biomedical Engineering.

[10]  Atta-ur-Rahman,et al.  Nuclear Magnetic Resonance , 1986 .

[11]  A. Pohl,et al.  Wireless sensing using oscillator circuits locked to remote high-Q SAW resonators , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[12]  A. Pohl.  A low-cost high-definition wireless sensor system utilizing intersymbol interference , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  Hiroyuki Shinoda,et al.  Tactile sensing using tensor cell , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[14]  Katsuhiko Nakamura,et al.  Instantaneous evaluation of friction based on ARTC tactile sensor , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[15]  Mark Lee,et al.  Review Article Tactile sensing for mechatronics—a state of the art survey , 1999 .

[16]  Ian W. Hunter,et al.  Fabrication by electrodeposition: building 3D structures and polymer actuators , 1995, MHS'95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science.