论文信息 - Design of oscillation-based test structures for active RC filters

Design of oscillation-based test structures for active RC filters

The oscillation test methodology is presented for active RC filters. The authors develop general guidelines for the design of the oscillation-based test structures and describe in more detail test transformations of filter configurations which are most frequently used in practice. Frequency measurements performed on some implemented test structures and fault detection experimental results are included. The oscillation-based test described in the paper is primarily intended for field testing. In some cases, it can also be used as a functional go no-go test in production. The presented test structures can also be employed for stimulus generation in a built-in self-test.

Franc Novak | Srecko Macek | Marina Santo Zarnik

[1] Diego Vázquez,et al. Practical DfT strategy for fault diagnosis in active analogue filters , 1995 .

[2] Karim Arabi,et al. Efficient and accurate testing of analog-to-digital converters using oscillation-test method , 1997, Proceedings European Design and Test Conference. ED & TC 97.

[3] Jacob A. Abraham,et al. A novel test generation approach for parametric faults in linear analog circuits , 1996, Proceedings of 14th VLSI Test Symposium.

[4] B. Kaminska,et al. Oscillation-test strategy for analog and mixed-signal integrated circuits , 1996, Proceedings of 14th VLSI Test Symposium.

[5] P. E. Allen,et al. Introduction to the theory and design of active filters , 1980 .

[6] Franc Novak,et al. Efficient go no‐go test of active RC filters , 1998 .