Polyurethane foam (PUF) passive samplers for monitoring phenanthrene in stormwater.

Pollution from highway stormwater runoff has been an increasing area of concern. Many structural Best Management Practices (BMPs) have been implemented for stormwater treatment and management. One challenge for these BMPs is to sample stormwater and monitor BMP performance. The main objective of this study was to evaluate the feasibility of using polyurethane foam (PUF) passive samplers (PSs) for sampling phenanthrene (PHE) in highway stormwater runoff and BMPs. Tests were conducted using batch reactors, glass-tube columns, and laboratory-scale BMPs (bioretention cells). Results indicate that sorption for PHE by PUF is mainly linearly relative to time, and the high sorption capacity allows the PUF passive sampler to monitor stormwater events for months or years. The PUF passive samplers could be embedded in BMPs for monitoring influent and effluent PHE concentrations. Models developed to link the results of batch and column tests proved to be useful for determining removal or sorption parameters and performance of the PUF-PSs. The predicted removal efficiencies of BMPs were close to the real values obtained from the control columns with errors ranging between -8.46 and 1.52%. This research showed that it is possible to use PUF passive samplers for sampling stormwater and monitoring the performance of stormwater BMPs, which warrants the field-scale feasibility studies in the future.

[1]  M. Kayhanian,et al.  Review of highway runoff characteristics: comparative analysis and universal implications. , 2012, Water research.

[2]  A. Davis,et al.  Pollutant Mass Flushing Characterization of Highway Stormwater Runoff from an Ultra-Urban Area , 2007 .

[3]  Upal Ghosh,et al.  Removal and fate of polycyclic aromatic hydrocarbon pollutants in an urban stormwater bioretention facility. , 2009, Environmental science & technology.

[4]  Andres Martinez,et al.  Simulating and explaining passive air sampling rates for semivolatile compounds on polyurethane foam passive samplers. , 2013, Environmental science & technology.

[5]  D. H. Freeman,et al.  Determination of the solubility behavior of some polycyclic aromatic hydrocarbons in water , 1978 .

[6]  Michael H Ramsey,et al.  Methodology for profiling anti-androgen mixtures in river water using multiple passive samplers and bioassay-directed analyses. , 2014, Water research.

[7]  J. Klánová,et al.  Evaluation and guidelines for using polyurethane foam (PUF) passive air samplers in double-dome chambers to assess semi-volatile organic compounds (SVOCs) in non-industrial indoor environments. , 2014, Environmental science. Processes & impacts.

[8]  Tom Harner,et al.  Polyurethane foam (PUF) disks passive air samplers: wind effect on sampling rates. , 2006, Environmental pollution.

[9]  Branislav Vrana,et al.  Chapter 7 Theory, modelling and calibration of passive samplers used in water monitoring , 2007 .

[10]  Tom Harner,et al.  Characterization and comparison of three passive air samplers for persistent organic pollutants. , 2002, Environmental science & technology.

[11]  T. Huttula,et al.  Effect of the orientation and fluid flow on the accumulation of organotin compounds to Chemcatcher passive samplers. , 2015, Environmental science. Processes & impacts.

[12]  Wilson & Wilson's comprehensive analytical chemistry , 1983 .

[13]  T. Harner,et al.  Characterization of two passive air samplers for per- and polyfluoroalkyl substances. , 2013, Environmental science & technology.

[14]  O. Gans,et al.  Passive sampling: an effective method for monitoring seasonal and spatial variability of dissolved hydrophobic organic contaminants and metals in the Danube river. , 2014, Environmental pollution.