A Synchronizing Control For Hexapod Walking Robot

This paper describes a synchroniz- ing control for a hexapod walking robot named "Hexax-I", which is developed for purpose of trans- portation in unstructured environnient. Hexapod robots are practical machine for such purpose, but they include several unsolved technical problems. While problems of power and mechanisms are ma- jor to be solved, control problems are also serious problenis. One of big control problem is the strat- egy how to syncliroiiise the six legs. 'Open loop control' is a simple approach, but it is not robust against disturbances by ground, thus it disables the good property,'flexible walking'. This paper proposes a simple control strategy to realize syn- chronized motion of six legs.

[1]  Katsuhiko Inagaki,et al.  Development of a hexapod walking robot: 'Hexax-I' , 1991, Proceedings IROS '91:IEEE/RSJ International Workshop on Intelligent Robots and Systems '91.

[2]  Hisato Kobayashi,et al.  A Servo System with Engine Actuator , 1991 .

[3]  K. Inagaki,et al.  Basic design of a hexapod walking robot , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[4]  Kenneth J. Waldron,et al.  Configuration Design of the Adaptive Suspension Vehicle , 1984 .

[5]  Shigeo Hirose,et al.  A Study of Design and Control of a Quadruped Walking Vehicle , 1984 .

[6]  Robert B. McGhee,et al.  Some finite state aspects of legged locomotion , 1968 .

[7]  Yoji Umetani,et al.  The Synthesis of Basic Motion Regulator System for Quadrupedal Walking Vehicle and Its Experiments , 1980 .

[8]  Minoru Abe,et al.  A hexapod walking machine with decoupled freedoms , 1985, IEEE J. Robotics Autom..