Underwater shear-stress sensor

This paper reports the development of a micromachined, vacuum-cavity insulated, thermal shear-stress sensor for underwater applications. We focus on two major challenges for underwater shear-stress sensors: the waterproof coating and pressure sensitivity. It is found that thin-film CVD Parylene is a good waterproof material and sensors coated with 2 /spl mu/m Parylene N can survive in water for at least one month at 55/spl deg/C. It is also found that reducing the size and increasing the thickness of the sensor diaphragm are effective in minimizing the pressure sensitivity.

[1]  Yu-Chong Tai,et al.  Mass flowmeter using a multi-sensor chip , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[2]  Y. Tai,et al.  Surface micromachined thermal shear stress sensor , 1994 .

[3]  Chih-Ming Ho,et al.  Flexible shear stress sensor skin for aerodynamics applications , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[4]  Chang-yu Liu.  MEMS based active drag reduction in turbulent boundary layer , 1999 .

[5]  R. Howe,et al.  Design and calibration of a microfabricated floating-element shear-stress sensor , 1988 .

[6]  Chih-Ming Ho,et al.  A surface-micromachined shear stress imager , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[7]  Y. Tai,et al.  A Surface-Micromachined Nitride-Diaphragm High-Pressure Sensor for Oil Well Application , 2000, Micro-Electro-Mechanical Systems (MEMS).