Statistical regression modeling and machinability study of hardened AISI 52100 steel using cemented carbide insert

© 2017 Growing Science Ltd. All rights reserved

[1]  Debabrata Dhupal,et al.  Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool , 2015 .

[2]  Biswanath Doloi,et al.  Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method and Regression analysis , 2011 .

[3]  J. Paulo Davim,et al.  Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques , 2007 .

[4]  J. S. Dureja.  Optimisation of tool wear during hard turning of AISI-H11 steel using TiN coated CBN-L tool , 2012 .

[5]  Ashok Kumar Sahoo,et al.  Performance assessment in hard turning of AISI 1015 steel under spray impingement cooling and dry environment , 2015 .

[6]  Ashok Kumar Sahoo,et al.  A response surface methodology and desirability approach for predictive modeling and optimization of cutting temperature in machining hardened steel , 2014 .

[7]  Tarek Mabrouki,et al.  Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel , 2012 .

[8]  J. Paulo Davim,et al.  Analysis of Machinability During Hard Turning of Cold Work Tool Steel (Type: AISI D2) , 2009 .

[9]  R. Suresh,et al.  Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool , 2012 .

[10]  Ashok Kumar Sahoo,et al.  Application of response surface methodology on investigating flank wear in machining hardened steel using PVD TiN coated mixed ceramic insert , 2013 .

[11]  Ty G. Dawson,et al.  Tool crater wear depth modeling in CBN hard turning , 2005 .

[12]  A. Sahoo,et al.  Experimental investigation on flank wear and tool life, cost analysis and mathematical model in turning hardened steel using coated carbide inserts , 2013 .

[13]  Ashok Kumar Sahoo,et al.  Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, grey relational and techno economical approach) , 2013 .

[14]  J. Guddat,et al.  Hard turning of AISI 52100 using PCBN wiper geometry inserts and the resulting surface integrity , 2011 .

[15]  E. Bayraktar,et al.  Experimental study of the chip morphology in turning hardened AISI D2 steel , 2013 .

[16]  M. Yallese,et al.  Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool , 2010 .

[17]  C. Richard Liu,et al.  Experimental study and evaluation methodology on hard surface integrity , 2007 .

[18]  Ali Riza Motorcu,et al.  Surface roughness model in machining hardened steel with cubic boron nitride cutting tool , 2008 .

[19]  Dilbag Singh,et al.  Flank wear prediction of ceramic tools in hard turning , 2010 .

[20]  P. V. Rao,et al.  A surface roughness prediction model for hard turning process , 2007 .

[21]  Satish Chinchanikar,et al.  Comparative Evaluations of Surface Roughness During Hard Turning under Dry and with Water-based and Vegetable Oil-based Cutting Fluids☆ , 2014 .

[22]  Ranjit K. Roy,et al.  Design of Experiments Using The Taguchi Approach: 16 Steps to Product and Process Improvement , 2001 .

[23]  Wuyi Chen,et al.  Cutting forces and surface finish when machining medium hardness steel using CBN tools , 2000 .

[24]  Hessainia Zahia,et al.  On the application of response surface methodology for predicting and optimizing surface roughness and cutting forces in hard turning by PVD coated insert , 2015 .

[25]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[26]  Wang Cheng-guo,et al.  The Application of Response Surface Methodology , 2005 .

[27]  J. Paulo Davim,et al.  Comparative evaluation of conventional and wiper ceramic tools on cutting forces, surface roughness, and tool wear in hard turning AISI D2 steel , 2007 .

[28]  J. Ferreira,et al.  A multivariate hybrid approach applied to AISI 52100 hardened steel turning optimization , 2007 .

[29]  Ashok Kumar Sahoo,et al.  Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts , 2012 .