Zeolite synthesised on copper foam for adsorption chillers: A mathematical model

Abstract In this work, a new adsorbent bed for adsorption chillers is proposed. Highly porous copper foams were directly sintered on the external surface of copper pipes. Afterwards, the foam surface was coated by several layers of zeolite 4A by in situ hydrothermal synthesis. The performance of an adsorbent bed based on the proposed configuration was then evaluated by a dynamic model. The results of simulations provided a cooling COP = 0.10–0.28, a specific cooling power ranging between 0.6 and 3.8 kW per kg of adsorbent material (77–123 W per kg of adsorber) and a volumetric cooling power of 103–214 kW per cubic meter of adsorber, depending on the copper foam thickness assumed (1–10 mm). A comparison with other “traditional” configurations based on loose pellets or consolidated layers of zeolite, demonstrated attractive performance – in terms of specific and volumetric powers – for the proposed adsorbent bed.

[1]  J. J. Guilleminot,et al.  Heat transfer intensification in fixed bed adsorbers , 1993 .

[2]  E. N. Sieder,et al.  Heat Transfer and Pressure Drop of Liquids in Tubes , 1936 .

[3]  Francis Meunier,et al.  Solid sorption heat powered cycles for cooling and heat pumping applications , 1998 .

[4]  Donald W Breck,et al.  Zeolite Molecular Sieves: Structure, Chemistry, and Use , 1974 .

[5]  R. Mahajan,et al.  Thermophysical properties of high porosity metal foams , 2002 .

[6]  E. Proverbio,et al.  Zeolite coated copper foams for heat pumping applications , 2006 .

[7]  Savvas A. Tassou,et al.  Thermal analysis on metal-foam filled heat exchangers. Part II: Tube heat exchangers , 2006 .

[8]  Giovanni Restuccia,et al.  A zeolite-coated bed for air conditioning adsorption systems: parametric study of heat and mass transfer by dynamic simulation , 2002 .

[9]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[10]  K. Vafai,et al.  A synthesis of fluid and thermal transport models for metal foam heat exchangers , 2008 .

[11]  Kai Choong Leong,et al.  Pressure drop and friction factor of steady and oscillating flows in open-cell porous media , 2008 .

[12]  A. Erdem-Senatalar,et al.  Optimization of the cycle durations of adsorption heat pumps employing zeolite coatings synthesized on metal supports , 2000 .

[13]  Jörg Kärger,et al.  Diffusion in Zeolites and Other Microporous Solids , 1992 .

[14]  E. Proverbio,et al.  Synthesis of thick zeolite 4A coatings on stainless steel , 2004 .

[15]  Hilda M. Davies,et al.  Statistics and experimental design: in engineering and the physical science , 1965 .

[16]  T. Missana,et al.  Diffusion experiments with compacted powder/pellets clay mixtures , 2004 .

[17]  Melkon Tatlier,et al.  A novel approach to enhance heat and mass transfer in adsorption heat pumps using the zeolite–water pair , 1999 .

[18]  J. Klett,et al.  The role of structure on the thermal properties of graphitic foams , 2004 .

[19]  A. Freni,et al.  An advanced solid sorption chiller using SWS-1L , 2007 .

[20]  J. Ferziger.  Numerical methods for engineering application , 1981 .