Component reduced all-pass filter with a grounded capacitor and high-impedance input

In the literature, opportunities of the current conveyors with reduced current gains are not adequately emphasised for filter designs. In this study, we show a new all-pass filter (APF) possibility using a current conveyor with half current gain. Although many first-order voltage mode APFs were proposed, most of them either cannot provide high input impedance and grounded capacitor features together or they provide these features with components more than necessary. The presented circuit provides both of these features using reduced number of elements. Spice simulation and experimental results are given to verify the theoretical results.

[1]  Neeta Pandey,et al.  All-pass filters based on CCII− and CCCII− , 2004 .

[2]  Sudhanshu Maheshwari.  High input impedance VM-APSs with grounded passive elements , 2007, IET Circuits Devices Syst..

[3]  Ali Toker,et al.  Realization of Voltage and Current Mode KHN Biquads Using CCCIIs , 2002 .

[4]  Hakan Kuntman,et al.  All-Pass Filters Using A Single Current Conveyor , 1998, Proceedings of the 6th International Conference on Optimization of Electrical and Electronic Equipments.

[5]  I. A. Khan,et al.  Simple first order all-pass section using a single CCII , 2000 .

[6]  Yannis Papananos,et al.  Continuous-time filters using buffers with gain lower than unity , 1994 .

[7]  Sudhanshu Maheshwari,et al.  Novel first order all-pass sections using a single CCIII , 2001 .

[8]  Yutaka Fukui,et al.  Research note Realization of all-pass networks using a current conveyor , 1988 .

[9]  Oguzhan Cicekoglu,et al.  A New All-pass Section for High-Performance Signal Processing with a Single CCII– , 2003 .

[10]  Hakan Kuntman,et al.  All-pass filters using a single current conveyor , 1999 .

[11]  Sudhanshu Maheshwari,et al.  High input impedance voltage‐mode first‐order all‐pass sections , 2008, Int. J. Circuit Theory Appl..

[12]  Ali Ümit Keskin,et al.  Wide-band resistorless all-pass sections with single element tuning , 2007 .

[13]  A. Toker,et al.  Supplementary all-pass sections with reduced number of passive elements using a single current conveyor , 2001 .

[14]  R.I. Salawu.  Realization of an all-pass transfer function using the second generation current conveyor , 1980, Proceedings of the IEEE.

[15]  Jiun-Wei Horng.  Current conveyors based allpass filters and quadrature oscillators employing grounded capacitors and resistors , 2005, Comput. Electr. Eng..