Cone-beam CT with a flat-panel detector on a mobile C-arm: preclinical investigation in image-guided surgery of the head and neck

A promising imaging platform for combined low-dose fluoroscopy and cone-beam CT (CBCT) guidance of interventional procedures has been developed in our laboratory. Based on a mobile isocentric C-arm (Siemens PowerMobil) incorporating a high-performance flat-panel detector (Varian PaxScan 4030CB), the system demonstrates sub-mm 3D spatial resolution and soft-tissue visibility with field of view sufficient for head and body sites. For pre-clinical studies in head neck tumor surgery, we hypothesize that the 3D intraoperative information provided by CBCT permits precise, aggressive techniques with improved avoidance of critical structures. The objectives include: 1) quantify improvement in surgical performance achieved with CBCT guidance compared to open and endoscopic techniques; and 2) investigate specific, challenging surgical tasks under CBCT guidance. Investigations proceed from an idealized phantom model to cadaveric specimens. A novel surgical performance evaluation method based on statistical decision theory is applied to excision and avoidance tasks. Analogous to receiver operating characteristic (ROC) analysis in medical imaging, the method quantifies surgical performance in terms of Lesion-Excised (True-Positve), Lesion-Remaining (False-Negative), Normal-Excised (False-Positive), and Normal-Remaining (True-Negative) fractions. Conservative and aggressive excision and avoidance tasks are executed in 12 cadaveric specimens with and without CBCT guidance, including: dissection through dura, preservation of posterior lamina, ethmoid air cells removal, exposure of peri-orbita, and excision of infiltrated bone in the skull base (clivus). Intraoperative CBCT data was found to dramatically improve surgical performance and confidence in the execution of such tasks. Pre-clinical investigation of this platform in head and neck surgery, as well as spinal, trauma, biopsy, and other nonvascular procedures, is discussed.

[1]  D. M. Green,et al.  Signal detection theory and psychophysics , 1966 .

[2]  B. Wilson,et al.  Volume CT with a flat-panel detector on a mobile, isocentric C-arm: pre-clinical investigation in guidance of minimally invasive surgery. , 2005, Medical physics.

[3]  A. Forastiere,et al.  Multidisciplinary approaches in the management of advanced head and neck tumors: state of the art , 2004, Current opinion in oncology.

[4]  W. Thumfart,et al.  Image-guided endoscopic ENT surgery , 2007, European Archives of Oto-Rhino-Laryngology.

[5]  Jeffrey H. Siewerdsen,et al.  Incorporation of task in 3D imaging performance evaluation: the impact of asymmetric NPS on detectability , 2004, SPIE Medical Imaging.

[6]  J A Swets,et al.  Signal detection and identification at successive stages of observation , 1978, Perception & psychophysics.

[7]  John Wong,et al.  Flat-panel cone-beam CT on a mobile isocentric C-arm for image-guided brachytherapy , 2002, SPIE Medical Imaging.

[8]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[9]  M. Vogele,et al.  Three‐Dimensional Image‐Guided Endonasal Surgery With a Microdebrider , 1997, The Laryngoscope.

[10]  J H Siewerdsen,et al.  Cone-beam computed tomography with a flat-panel imager: initial performance characterization. , 2000, Medical physics.

[11]  Jeffrey H. Siewerdsen,et al.  Flat-panel cone-beam CT: a novel imaging technology for image-guided procedures , 2001, SPIE Medical Imaging.

[12]  W. Montgomery,et al.  The role of image-guidance systems for head and neck surgery. , 1999, Archives of otolaryngology--head & neck surgery.

[13]  C. Metz.  ROC Methodology in Radiologic Imaging , 1986, Investigative radiology.