Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devices

Technologically advanced human societies require specialized tools and equipment to enable their diverse and mobile activities. Portable electronic devices like laptop, PDA, handphone, etc. are now an essential tool for many people in their daily lives. The rechargeable batteries used to power the portable electronic devices could be improved upon with regards to power density, and there is a crucial need for efficient, renewable and more environmentally friendly power sources. Many researchers have shown that the direct methanol fuel cell (DMFC) is an appropriate alternative to rechargeable battery technology, although many factors must be resolved before it can be commercialized. This paper gives an overview on the possibilities for using the DMFC as portable electronic devices power source along with some views on current and future trends in DMFC development, economic analysis and presents the current problems and solutions by DMFC researchers.

[1]  Ho-Young Jung,et al.  Long-term performance of DMFC based on the blend membrane of sulfonated poly(ether ether ketone) and poly(vinylidene fluoride) , 2009 .

[2]  Tianshou Zhao,et al.  Effect of anode flow field design on the performance of liquid feed direct methanol fuel cells , 2005 .

[3]  Zhen Guo,et al.  Miniature DMFCs with passive thermal-fluids management system , 2006 .

[4]  Tianshou Zhao,et al.  Modeling of water transport through the membrane electrode assembly for direct methanol fuel cells , 2008 .

[5]  Jiujun Zhang,et al.  A review of polymer electrolyte membranes for direct methanol fuel cells , 2007 .

[6]  Jian Zhang,et al.  Effects of hot pressing conditions on the performances of MEAs for direct methanol fuel cells , 2007 .

[7]  Ning-Yih Hsu,et al.  Application of low-voltage electrophoretic deposition to fabrication of direct methanol fuel cell electrode composite catalyst layer , 2009 .

[8]  Chieh-Hao Wan,et al.  A composite anode with reactive methanol filter for direct methanol fuel cell , 2009 .

[9]  Juin-Yih Lai,et al.  Increases in the proton conductivity and selectivity of proton exchange membranes for direct methanol fuel cells by formation of nanocomposites having proton conducting channels , 2009 .

[10]  Ali Durmus,et al.  Self-assembled polyelectrolyte multilayered films on Nafion with lowered methanol cross-over for DMFC applications , 2009 .

[11]  Christian Hentschel,et al.  Characterisation of a portable DMFC stack and a methanol-feeding concept , 2006 .

[12]  J. Divisek,et al.  Process engineering of the direct methanol fuel cell , 2000 .

[13]  Shimshon Gottesfeld,et al.  Optimization of Direct Methanol Fuel Cell Systems and Their Mode of Operation , 2008 .

[14]  A. A. Kulikovsky,et al.  Heat transport in the membrane–electrode assembly of a direct methanol fuel cell: Exact solutions , 2007 .

[15]  Nobuyoshi Nakagawa,et al.  Reaction analysis of a direct methanol fuel cell employing a porous carbon plate operated at high methanol concentrations , 2009 .

[16]  Rong Chen,et al.  The effect of methanol concentration on the performance of a passive DMFC , 2005 .

[17]  K. Shinozuka.  Kyoto , 2020, Encyclopedia of Animal Cognition and Behavior.

[18]  Jiujun Zhang,et al.  Design and testing of a passive planar three-cell DMFC , 2007 .

[19]  Rong Chen,et al.  Porous current collectors for passive direct methanol fuel cells , 2007 .

[20]  Amir Faghri,et al.  Development of a 1 W passive DMFC , 2008 .

[21]  Chien-Kung Lin,et al.  Preparation of nitrated sulfonated poly(ether ether ketone) membranes for reducing methanol permeability in direct methanol fuel cell applications , 2009 .

[22]  Sergey Shishatskiy,et al.  Preparation and characterization of bilayer carbon/polymer membranes , 2009 .

[23]  Xin Wang,et al.  Fabrication of the porous polyimide film as a matrix of the composite membrane of the direct methanol fuel cell , 2009 .

[24]  M. Aulice Scibioh,et al.  Impact of cathode channel depth on performance of direct methanol fuel cells , 2008 .

[25]  Litian Liu,et al.  A micro-direct methanol fuel cell stack with optimized design and microfabrication , 2008 .

[26]  W. Preidel,et al.  Status of the development of a direct methanol fuel cell , 1999 .

[27]  Xuan Cheng,et al.  Characterization of catalysts and membrane in DMFC lifetime testing , 2006 .

[28]  Yung-Eun Sung,et al.  The improved methanol tolerance using Pt/C in cathode of direct methanol fuel cell , 2008 .

[29]  Chao-Yang Wang,et al.  Electrochemical and flow characterization of a direct methanol fuel cell , 2004 .

[30]  Mohammad Ali Abdelkareem,et al.  Effect of oxygen and methanol supply modes on the performance of a DMFC employing a porous plate , 2007 .

[31]  M. Wakihara.  Recent developments in lithium ion batteries , 2001 .

[32]  L. K. Verma,et al.  Studies on methanol fuel cell , 2000 .

[33]  C. Rayment,et al.  Introduction to Fuel Cell Technology , 2003 .

[34]  C. L. Huang,et al.  Portable DMFC system with methanol sensor-less control , 2007 .

[35]  Tao Zhang,et al.  Performance of miniaturized direct methanol fuel cell (DMFC) devices using micropump for fuel delivery , 2006 .

[36]  Qin Xin,et al.  Zirconium phosphate/Nafion115 composite membrane for high-concentration DMFC , 2008 .

[37]  Zhiqing Shi,et al.  Non-fluorinated proton-exchange membranes based on melt extruded SEBS/HDPE blends , 2008 .

[38]  V. Shahi,et al.  Surface redox polymerized SPEEK–MO2–PANI (M = Si, Zr and Ti) composite polyelectrolyte membranes impervious to methanol , 2009 .

[39]  Kee Suk Nahm,et al.  Fabrication and electro chemical properties of poly vinyl alcohol/para toluene sulfonic acid membranes for the applications of DMFC , 2009 .

[40]  Matthias Wessling,et al.  Nafion®/H-ZSM-5 composite membranes with superior performance for direct methanol fuel cells , 2009 .

[41]  N. Chandrakumar,et al.  Mordenite-incorporated PVA-PSSA membranes as electrolytes for DMFCs , 2009 .

[42]  Antonino S. Aricò,et al.  Influence of flow field design on the performance of a direct methanol fuel cell , 2000 .

[43]  Amir Faghri,et al.  Water and air management systems for a passive direct methanol fuel cell , 2007 .

[44]  Chaoyang Wang,et al.  Development of micro direct methanol fuel cells for high power applications , 2005 .

[45]  Qiang Ye,et al.  Experimental investigations of the anode flow field of a micro direct methanol fuel cell , 2006 .

[46]  Chun-Chen Yang,et al.  Preparation of the PVA/HAP composite polymer membrane for alkaline DMFC application , 2008 .

[47]  Yohtaro Yamazaki,et al.  Ultrasonic synthesis and evaluation of non-platinum catalysts for alkaline direct methanol fuel cells , 2009 .

[48]  Emanuel Peled,et al.  Effect of methanol, ethylene glycol and their oxidation by-products on the activity of Pt-based oxygen-reduction catalysts , 2009 .

[49]  Hui Na,et al.  Modification of sulfonated poly(ether ether ketone) proton exchange membrane for reducing methanol crossover , 2008 .

[50]  Arunachala Mada Kannan,et al.  Proton-conducting membranes with high selectivity from cross-linked poly(vinyl alcohol) and poly(vinyl pyrrolidone) for direct methanol fuel cell applications , 2009 .

[51]  Yean-Der Kuan,et al.  Characterization of a liquid feed direct methanol fuel cell with Sierpinski carpets fractal current collectors , 2008 .

[52]  Robert F. Savinell,et al.  High temperature proton exchange membranes based on polybenzimidazoles for fuel cells , 2009 .

[53]  Ay Su,et al.  Effects of cathode flow fields on direct methanol fuel cell-simulation study , 2007 .

[54]  Zhongyi Jiang,et al.  A facile surface modification of Nafion membrane by the formation of self-polymerized dopamine nano-layer to enhance the methanol barrier property , 2009 .

[55]  Hongtan Liu,et al.  Real time measurements of methanol crossover in a DMFC , 2007 .

[56]  Frank Kreith,et al.  Handbook of energy efficiency and renewable energy , 2007 .

[57]  Chenggang Xie,et al.  Development of a 2 W direct methanol fuel cell power source , 2004 .

[58]  Kai Sundmacher,et al.  Dynamics of the direct methanol fuel cell (DMFC): experiments and model-based analysis , 2001 .

[59]  Jaroslav Stejskal,et al.  Low methanol-permeable polyaniline/Nafion composite membrane for direct methanol fuel cells , 2009 .

[60]  Christophe Coutanceau,et al.  Development of materials for mini DMFC working at room temperature for portable applications , 2006 .

[61]  Didier Bloch.  Miniature Fuel Cells for Portable Applications , 2004 .

[62]  Suk Won Cha,et al.  Performance evaluation of passive direct methanol fuel cell with methanol vapour supplied through a flow channel , 2008 .

[63]  M. Aulice Scibioh,et al.  On the consequences of methanol crossover in passive air-breathing direct methanol fuel cells , 2005 .

[64]  Paul A. Kohl,et al.  Sol–gel based sulfonic acid-functionalized silica proton conductive membrane , 2009 .

[65]  Yung-Eun Sung,et al.  Improved methanol tolerance using Pt/C in cathode of direct methanol fuel cell , 2008 .

[66]  Jung-Ho Wee,et al.  Which type of fuel cell is more competitive for portable application: Direct methanol fuel cells or direct borohydride fuel cells? , 2006 .

[67]  Detlef Stolten,et al.  Development of a compact 500 W class direct methanol fuel cell stack , 2002 .

[68]  Ji Young Kim,et al.  Poly(1-vinylimidazole)/Pd-impregnated Nafion for direct methanol fuel cell applications , 2008 .

[69]  Tatyana V. Reshetenko,et al.  Performance of a direct methanol fuel cell (DMFC) at low temperature: Cathode optimization , 2006 .

[70]  Jianyu Cao,et al.  Methanol oxidation on carbon-supported Pt–Ru–Ni ternary nanoparticle electrocatalysts , 2008 .

[71]  Chuan Dong,et al.  Study on the supramolecular systems of two basic violets with cyclodextrins by MWNTs/Nafion modified glassy carbon electrode , 2009 .

[72]  Christopher K. Dyer.  Fuel cells for portable applications , 2002 .

[73]  Hongtan Liu,et al.  Experimental studies of a direct methanol fuel cell , 2005 .

[74]  Geping Yin,et al.  Investigation of the performance decay of anodic PtRu catalyst with working time of direct methanol fuel cells , 2008 .

[75]  Amir Faghri,et al.  Development of a 1W passive DMFC , 2008 .

[76]  Siti Kartom Kamarudin,et al.  Overview on the challenges and developments of micro-direct methanol fuel cells (DMFC) , 2007 .

[77]  Angelo Basile,et al.  Thermo and electrochemical characterization of sulfonated PEEK–WC membranes and Krytox-Si-Nafion® composite membranes , 2009 .

[78]  F. R. Foulkes,et al.  Fuel Cell Handbook , 1989 .

[79]  Jen-Ming Yang,et al.  Direct methanol fuel cell (DMFC) based on PVA/MMT composite polymer membranes , 2009 .

[80]  Jung-Ho Wee,et al.  A feasibility study on direct methanol fuel cells for laptop computers based on a cost comparison with lithium-ion batteries , 2007 .

[81]  S. Srinivasan,et al.  International activities in DMFC R&D: status of technologies and potential applications , 2004 .

[82]  Christian Piguet,et al.  Low-Power Electronics Design , 2004 .

[83]  San Ping Jiang,et al.  Performance of direct methanol fuel cells prepared by hot-pressed MEA and catalyst-coated membrane (CCM) , 2007 .

[84]  Mohammad Mahdi Hasani-Sadrabadi,et al.  Nafion ® /bio-functionalized montmorillonite nanohybrids as novel polyelectrolyte membranes for direct methanol fuel cells , 2009 .

[85]  Michael D. Guiver,et al.  Acid-base blend membranes based on 2-amino-benzimidazole and sulfonated poly(ether ether ketone) for direct methanol fuel cells , 2007 .

[86]  Manos Mavrikakis,et al.  Reactivity descriptors for direct methanol fuel cell anode catalysts , 2008 .

[87]  Yongming Zhang,et al.  Preparation of polysiloxane modified perfluorosulfonic acid composite membranes assisted by supercritical carbon dioxide for direct methanol fuel cell , 2009 .

[88]  Chaoyang Wang,et al.  Development and characterization of a silicon-based micro direct methanol fuel cell , 2004 .

[89]  Alexandre Hacquard,et al.  Improving and Understanding Direct Methanol Fuel Cell (DMFC) Performance , 2005 .

[90]  Yong Yang,et al.  A novel inorganic/organic composite membrane tailored by various organic silane coupling agents for use in direct methanol fuel cells , 2009 .

[91]  Alexandra M.F.R. Pinto,et al.  Heat and mass transfer effects in direct methanol fuel cell: 1D model , 2008 .

[92]  T. Iwasita,et al.  Methanol and CO electrooxidation , 2010 .

[93]  Hong Zhang,et al.  Novel sulfonated poly(ether ether ketone ketone)s for direct methanol fuel cells usage: Synthesis, water uptake, methanol diffusion coefficient and proton conductivity , 2009 .

[94]  Emanuel Peled,et al.  Water-neutral micro direct-methanol fuel cell (DMFC) for portable applications , 2003 .

[95]  Nur Hidayati Othman,et al.  Sulfonated polyether ether ketone composite membrane using tungstosilicic acid supported on silica–aluminium oxide for direct methanol fuel cell (DMFC) , 2009 .

[96]  Hou-Chin Cha,et al.  Investigation on the durability of direct methanol fuel cells , 2009 .

[97]  Ibrahim Dincer,et al.  Performance evaluation of direct methanol fuel cells for portable applications , 2009 .

[98]  A. Hamnett,et al.  Mechanism and electrocatalysis in the direct methanol fuel cell , 1997 .

[99]  Keith Scott,et al.  Engineering aspects of the direct methanol fuel cell system , 1999 .

[100]  Bing-Joe Hwang,et al.  Investigations of direct methanol fuel cell (DMFC) fading mechanisms , 2007 .

[101]  In-Hwan Oh,et al.  Operational characteristics of a 50 W DMFC stack , 2006 .

[102]  Angelo L. Gattozzi,et al.  Operational characteristics of a flux pump , 1979 .

[103]  L. Carrette,et al.  Fuel Cells - Fundamentals and Applications , 2001 .

[104]  Jian Zhang,et al.  Effects of MEA preparation on the performance of a direct methanol fuel cell , 2006 .

[105]  Ting Yuan,et al.  New anodic diffusive layer for passive micro-direct methanol fuel cell , 2009 .

[106]  Kah-Young Song,et al.  MEA design for low water crossover in air-breathing DMFC , 2007 .

[107]  Sung Min Cho,et al.  In situ formation of platinum nanoparticles in Nafion recast film for catalyst-incorporated ion-exchange membrane in fuel cell applications , 2008 .

[108]  Shimshon Gottesfeld,et al.  Electrocatalysis in direct methanol fuel cells: in-situ probing of PtRu anode catalyst surfaces , 2000 .

[109]  Yang Liu,et al.  Power characteristics and fluid transfer in 40 W direct methanol fuel cell stack , 2007 .

[110]  M. Pina,et al.  Zeolites and zeotype materials as efficient barriers for methanol cross-over in DMFCs , 2008 .

[111]  M. Broussely,et al.  Li-ion batteries and portable power source prospects for the next 5–10 years , 2004 .

[112]  Andrea Casalegno,et al.  Experimental analysis of methanol cross-over in a direct methanol fuel cell , 2007 .

[113]  Inseob Song,et al.  Mass balance research for high electrochemical performance direct methanol fuel cells with reduced methanol crossover at various operating conditions , 2008 .

[114]  Sung Hyun Kim,et al.  Methanol crossover through PtRu/Nafion composite membrane for a direct methanol fuel cell , 2007 .

[115]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[116]  Jae Hyuk Jang,et al.  Micro-fuel cells—Current development and applications , 2007 .